Check engine light on ABS light on GM vehicles?

  • When the ABS light comes on, the first thing you should do is find a safe place to stop the vehicle, shut it off, and then start it up again. This will make the computer recheck all of the sensors for any abnormalities. Just like your computer at home, doing a simple reset may fix the issue and the light will shut off.

Why did my ABS and check engine light come on?

Most commonly, the charging system light, check engine light, and ABS light come on when there is an issue with the battery, alternator, or cables. You will want to start by making sure the cables are clean, dry, and tight. After that have your battery and alternator checked.

What does check engine ABS mean?

The ABS light indicates that there is a malfunction within the Anti-lock Brake System. Typically, when this light is illuminated the vehicle’s on-board diagnostic system has stored a code, which can be retrieved and assist in diagnosing the problem.

Can you drive with ABS light on?

It’s Safe To Drive Carefully With The ABS Light On. You can still drive the car with your ABS light on, because it does not impact normal braking. However, we wouldn’t recommend you do this because your ABS system helps to control stopping, and it can be dangerous to be driving without it.

Why does my ABS light keep coming on and off?

The four common reasons that typically cause this light to turn on include a malfunctioning ABS module, low levels in the fluid reservoir, broken wheel speed sensors, or the system is turned off. Your ABS actually shares some important components with another system in your vehicle: your traction control system.

What are the symptoms of a bad ABS sensor?

The most common symptom of a bad ABS sensor is an ABS warning light showing up on your dashboard. You may also notice issues like a pulsating brake pedal while braking or a complete loss of the anti-lock brake system.

What are the symptoms of a bad ABS module?

Signs Of A Faulty ABS Module

  • The ABS Warning Light Glows. This is the most common sign of problems with the ABS system.
  • The Brakes Lock Up. The ABS system is specifically designed to prevent any wheel from locking up during heavy braking.
  • An Unresponsive Brake Pedal.
  • Increased Pedal Effort.
  • Speedometer Failure.

Can low battery cause ABS light to come on?

Problem Description A weak battery can cause the ABS light to turn on. A brake light that is not working or has burned out can also cause the ABS light to illuminate.

Is ABS warning light serious?

The ABS warning light is a sign that the system might be compromised. Every time a vehicle is started, the ABS light will come on momentarily as the system does a diagnostic self-check. If the light does not illuminate, the warning lamp bulb could be defective.

How much does it cost to fix ABS light?

Many ABS components are very accessible, so labor for most repairs will not run high typically in the $100 to $150 range. A typical ABS sensor will cost about $80 to $125 however, on some makes and models the sensor is part of a hub/bearing assembly (GM, Ford, some others) and the price will rise to around $350.

How do I get the ABS light off in my car?

Locate the DIC control panel on the dashboard in front of the driver’s seat under the speedometer. Keep pushing and releasing the ‘Set’ button on the DIC control panel until ‘ABS’ is shown. Hold the ‘Set’ button for about 5 seconds to reset the light and turn it off.

Can AutoZone diagnose ABS light?

Unfortunately, the only way to check whether or not the problem is with the ABS is to go and get the codes of your car read. AutoZone can scan your codes as part of our Fix Finder service, or you can do it yourself if you already have a scan tool.

How long can I drive my car with the ABS light on?

When your ABS light comes on it doesn’t mean your vehicle isn’t safe to drive from point A to point B. The car will still function as normal, it will start up just fine and drive how it always has and your brakes will work as well.

Where are the ABS sensors located?

The ABS sensor is typically located in each wheel hub/rotor on a four channel ABS system. Some rear wheel drive applications have the sensor mounted in the rear differential.

Why Is My ABS or Traction Control Light On?

The presence of an unknown light flashing on your vehicle’s dashboard is natural, and you may feel a bit anxious or frightened. It’s possible that certain lights, such as the check engine light, are indicating a significant problem, while others may simply be serving as an alert that it’s time to fill up your gas tank. Whatever the reason, it is critical to conduct thorough research to determine what light has been switched on and why it has been turned on. Because your ABS (Anti-lock Braking System) and traction control are frequently controlled by the same control module in a vehicle’s system, if the light for this module illuminates, it may be more difficult to determine the source of the problem.

Due to the fact that the ABS and traction control are frequently housed in the same module, a problem with one mechanism may be highlighted by a light for both mechanisms.


If the brake fluid in your vehicle is running low, the ABS light may also illuminate.

  1. It’s possible that your car will drive differently if your brake fluid is running low.
  2. When the brake fluid level is low, you will most likely see other system signs or alerts in addition to the ABS light on the dashboard.
  3. Make certain that you utilize the suitable fluid type for your vehicle’s needs.
  4. Make careful to inspect the whole brake and ABS system for any signs of leakage.
  5. can assess the system and check for leaks if there are any.
  6. The Wheel Speed Sensors Have Been Destroyed Additionally, most cars are equipped with wheel speed sensors, which can determine the pace at which each wheel is rotating.
  7. Alternatively, the sensors may become filthy or damaged over time, resulting in an erroneous measurement.
  8. 4.
  9. It is possible that the indicator will illuminate as a result of turning off the traction control.
  10. Take a look at the handbook for your car to see how to switch traction control back on if you accidentally turned it off by accident.
  11. With traction control systems and Anti-lock Braking Systems, we have a great deal of knowledge and expertise.

In addition, electrical faults that may result in misleading car notifications are possible. Contact Christian Brothers Automotive Grant Road in Cypress to speak with one of our auto repair professionals about your vehicle’s issues. Categories:

Chevrolet ABS Light Stays On

When the anti-lock braking system (ABS) light on your Chevrolet continues to illuminate while you are driving, it might indicate that the ABS is malfunctioning. When the anti-lock braking system (ABS) malfunctions, a fault code is saved in the computer. The ABS module stores the fault code when it detects a problem. It is possible that your car will require a larger stopping distance. Due to the fact that the ABS is required for proper operation, traction control will be turned off if your vehicle has this feature installed.


On a Chevrolet, the most common symptoms that you will observe are those associated with an ABS problem.

  • The ABS light remains on
  • The brake light remains illuminated
  • The car requires a greater stopping distance. Traction and stability are inhibited as a result of the service traction control message.

On slick roads, especially while the Chevrolet ABS light is up, it may take longer to bring the vehicle completely up to speed. Chevrolet wheels have the potential to lock up during braking if they do not have anti-lock braking system (ABS).

Why is my Chevy ABS light on?

The following are the most typical issues that cause the ABS light to illuminate on a Chevrolet vehicle:

  1. A bad ABS wheel speed sensor
  2. A defective steering angle sensor
  3. A damaged wire harness
  4. A faulty brake light switch
  5. A defective ABS module or pump
  6. A bad ground connection
  7. And so on. Low level of brake fluid

Any of these issues might cause the Chevrolet ABS light to illuminate and remain on. To further investigate this issue, a diagnostic scanner should be used to read the error codes stored in the ABS module.

How to Diagnose and Reset ChevyABS Light

An error code will be stored in your Chevrolet ABS module if your Chevrolet ABS light remains illuminated for an extended period of time. To determine why your Chevrolet’s ABS light is illuminated, look at the error codes stored in the ABS module. You will need an ABS OBD-II scanner for Chevrolet in order to troubleshoot the ABS light(s) on your vehicle.

  1. Park your Chevrolet in a well-lit spot where you will be able to work
  2. Locate the Chevrolet OBD-2 port, which is located beneath the dash. Connect the OBD-2 scanner to the OBD2 connector on the dashboard of your Chevrolet
  3. Start the car by turning the key in the ignition. All of the Chevrolet dashboard lights should be on, but the engine should not be started. To start or stop your Chevrolet, push the START/STOP button two times while keeping your foot on the brake pedal. Ensure that your Chevrolet OBD-2 scanner can communicate with the Engine Control Unit (ECU). This may take a few seconds
  4. Please be patient. Chevrolet may be found in the drop-down menu. Manually choose the Anti-lock Brake System option from the drop-down menu. ChevroletBrake Systemmenu for the Model A Chevrolet. ABS module for the Chevrolet Model
  5. Read codes from the ABS module

Your Chevrolet dealer, as well as your local vehicle technician, may execute this process for you at no cost. In addition, if you have the properOBD-IIscanner, you may read your Chevrolet ABS codes on your own.

Clear Chevrolet ABS Codes

  1. Once you’ve resolved your Chevrolet ABS issue, you may return to the vehicle and clear the ABS fault codes. This indicates that the ABS module is either malfunctioning or in need of replacement, which may be an expensive repair. Alternatively, you can have your ABS unit rebuilt by a third-party service provider if your scanner cannot interact with the ABS module.

Keep in mind that you won’t be able to reset the ABS light on your Chevrolet until you’ve resolved the issue that caused the light to come on in the first place. Remember to keep an eye on the brake fluid level. If the brake fluid level falls below the MIN mark, only the brake fluid type specified on the brake fluid cap should be added. DOT 4Brake Fluid is often used, however you should double-check the cap on your Chevrolet to make sure. Read ABS codes from Chevy cars such as the Spark, Sonic, Bolt, Volt; Cruze; Malibu; Impala; Camaro; Corvette; City Express; Trax; Equinox; Traverse; Tahoe; Suburban; Colorado; Silverado; Sonic; Blazer; Astro; HHR; Uplander; and Avalanche by following these instructions.

Chevy ABS light on but no codes?

Because a basic scanner cannot reach the ABS module, you will not be able to get any error codes even while the ABS light is illuminated when you use it. The reason for this is that the fault codes are stored in the ABS module, and hence, anOBD-II ABS scanner is required. This means that the codes from the ENGINEmodule are being read by your scanner and not those from the ABS module.

If you have the correct scanner but still receive an error while attempting to interact with the ABS module, it is likely that the module itself is faulty or that a blown fuse is to blame.

GMC StabiliTrak Problems

Posted on October 22, 2012 by LemonLaw in General Motors, General Motors Worldwide While General Motors has made tremendous strides with many of their vehicles, we have consistently observed one issue that affects a number of models, including the Chevrolet Silverado, Chevrolet Equinox, GMC Acadia, GMC Sierra, GMC Savannah, GMC Canyon, Buck Enclave, Cadillac Escalade, and Cadillac SRX: the transmission.

  • Because of the StabiliTrak electronic stability control system, there is a difficulty with the StabiliTrack system.
  • If these lights illuminate, it is often indicative that these critical safety features are being deactivated.
  • The StabiliTrak light has illuminated five times in the first 5,000 miles of driving on a 2012 GMC Canyon, and we are now investigating the claim.
  • At first, the dealer claimed that they were unable to reproduce the StabiliTrak issues; but, after considerable insistence, they admitted that the steering angle sensor was faulty and that it had been repaired or changed.
  • Many cases regarding the StabiliTrak system have been successfully handled by our firm over the years, resulting in the purchase of new vehicles or substantial monetary compensation for our clients.
  • Even if the shop claims they are unable to recreate the fault, you should insist on receiving a repair invoice verifying the appointment.
  • You must stand up and fight for your rights.
  • They will be able to guide you through the recovery process.
  • Residents of New Jersey and New York may learn more about their respective state’s lemon laws by visiting ourNJ lemon law andNY lemon lawpages, which are also available online.

AAMCO Keller Blog

AAMCO of Keller, TX is ready to assist you if your vehicle’s ABS or Traction Control lights are illuminated. Find out why your ABS and traction control lights are illuminated and what you can do about it. Since the 2012 model year, traction control has been standard on all automobiles and light trucks, and many vehicles from previous years that had antilock brakes were also equipped with traction control systems. This is due to the fact that traction control is integrated into the antilock brake system (ABS) and employs the same wheel-speed sensors to detect tire slippage when the vehicle is being driven.

See also:  Oil Filter Rip Off?

Unlike traction control, which maintains traction while accelerating, and anti-lock braking systems (ABS), which do the same when braking, electronic stability systems compare the vehicle’s trajectory to the direction in which the driver appears to want the vehicle to go, and brake individual wheels to keep the vehicle on track.

  • They are housed at the base of each wheel and operate in a harsh environment that includes potholes, water, snow and other debris.
  • When there is an issue with the system, a dashboard warning light will normally appear, indicating that traction control has been deactivated and, in certain situations, that the anti-lock braking system has been disabled as well.
  • Sensors that measure wheel speed are meant to detect when one of the vehicle’s drive wheels is spinning faster than the others, indicating that the vehicle is losing grip or slipping.
  • When the spinning wheel is stopped, the power can be transferred to the other driving wheel or wheels that have higher traction on the road.
  • Sometimes the warning light will illuminate because the wheel-speed sensors are coated with road filth or debris, which causes the warning light to illuminate.
  • When the traction control warning light remains illuminated, it indicates that you are not receiving any assistance from the system in controlling traction, and the system should be examined.
  • The majority of wheel slippage may be avoided simply easing off on the gas pedal during acceleration.

In most cases, a scan tool is required to read the trouble code that prompted the warning light in order to diagnose the problem. Scan tools can assist in determining what the problem is (for example, a defective speed sensor or connection) and at which wheel it is occurring (s).

Can I drive with the traction control warning light on?

You shouldn’t be alarmed if the traction control light illuminates while you’re driving but no other warning lights are glowing at the same time. Choose an appropriate location to pull over, turn off your car, and then restart it. If the warning light was triggered by a glitch in the TCS system, it should switch off and remain off when you restart the engine. If the light turns back on, it’s most likely time to call a repair and have the system evaluated. Until the problem is resolved, drive slowly and avoid strong acceleration, which might cause the wheels to slip out from under you.

If the TCS and ABS warning lights illuminate simultaneously, as well as the red main brake warning light, you should refrain from driving the vehicle until the problem has been resolved.

Towing your vehicle to a repair facility is a good idea.

The exact issue code might assist in determining which component is generating the failure, as well as its precise placement on the vehicle.

ABS light on Archives

The 23rd of January, 2019 Diagnose and repair the ABS light and the Stabilitrak light that are illuminated. It has been determined that the cars mentioned below are affected by the service bulletin 08-05-25-004A, which addresses the ABS light on and the Stabilitrak light on. The ABS light may illuminate, the Stabilitrak light may illuminate, and any of the following issue codes may be shown. C0035 Left Front Wheel Speed Sensor Circuit C0036 Left Front Wheel Speed Sensor Circuit Range/Performance C0035 Left Front Wheel Speed Sensor Circuit C0036 Left Front Wheel Speed Sensor Circuit Range/Performance Left front wheel speed sensor circuit is low in the C0037.

In this circuit, the right front wheel speed sensor circuit is C0041.

In this circuit, the right front wheel speed sensor circuit is.

ABS light on, C0265, C0201, U1041

30th of January, 2018 GM service bulletin04-05-25-002E for the ABS light being illuminated, C0265, C0201, and U1041 is available. ABS light on, C0265, C0201, U1041? How to diagnose and fix it? Service bulletin04-05-25-002E has been issued by General Motors to address the ABS light on, C0265, C0201, and U1041 conditions on the vehicles listed below. 2004-07 Cadillac Escalade, Escalade EXT 2003-06 Buick Ranier 2002-06 Cadillac Escalade, Escalade EXT 2003-06 Cadillac Escalade ESV, model years 1999-2007 Chevrolet Silverado Classic 2000-2006 Chevrolet Suburban and Tahoe 2002-2006 Chevrolet Silverado Classic The Chevrolet Avalanche is a mid-size pickup truck.

Chevrolet SSR (Standard Suspension Rod) From 1999 to 2007, GMC Sierra Classic models were available.

More information can be found at

What causes ABS light?

The 12th of January, 2018 What is causing my ABS light to illuminate? What should I do if the ABS light is illuminated? Among the components of the antilock braking system (ABS) are wheel speed sensors, a wire harness, a pump and valves, and a computer. The computer monitors the status of the wheel speed sensors, wire harness, pump, and valves on a continuous basis. When the ABS light illuminates, it shows that there is a problem with one of those components. The ABS light illuminates, a trouble code is generated, the ABS system is turned off, and the ABS light illuminates.

It ALWAYS starts with obtaining the.

ABS light on, TRAC off, Stabilitrac

The 7th of December, 2016 What does it imply when the ABS light is on, the TRAC light is off, and the Stabilitrac light is off? If you own one of the General Motors cars mentioned below and you are experiencing any of the following warnings: The following service bulletinPIC5248E from General Motors should be read if you have the ABS light on, TRAC light off, Service Traction Control System light on, Service Stabilitrak light on, and/or have any of the following problem codes recorded on your computer: C0035, C0040, C0045, C0050.

C0035 Left Front Wheel Speed Sensor Circuit C0040 Right Front Wheel Speed Sensor Circuit C0045 Left Rear Wheel Speed Sensor Circuit C0050 Right Rear Wheel Speed Sensor Circuit C0035 Left Front Wheel Speed Sensor Circuit C0040 Right Front Wheel Speed Sensor Circuit More information can be found at

ABS light on

The 17th of October, 2015 What does the ABS light imply when it comes on? If your car’s ABS indicator is illuminated, it implies that the computer has identified a problem with the anti-lock braking system (ABS) of your vehicle. Every time you start up your car, the computer does a self-test. During the test, the ABS computer (if fitted) is checked for appropriate values, and the digital connection between the ABS computer and the main PCM computer is checked for good operation. Upon detecting a malfunction, the system records the fault code, illuminates the ABS warning light, and disables the ABS braking system, among other things.

More information can be found at

Abs light on, traction control light on, Impala

Diagnostic ABS light on, traction control light on, Impala Diagnostic ABS light on, traction control light on, Service Stability System Message Posted on July 10, 2014 Shops are reporting difficulties with Impala vehicles that have the ABS light illuminated and the traction control light illuminated. A ‘Service Stability System’ notice may appear on the driver information center of vehicles manufactured in 2012 and 2013. The problem affects vehicles manufactured in 2013 and may also appear on vehicles manufactured in 2012.

Additionally, the instrument cluster may not function properly.

More information can be found at

ABS light on Honda Civic

The 17th of September, 2013 Honda Civic’s ABS light should be fixed. You should not instantly assume that your Honda Civic’s ABS light is illuminated due to code 81-01 ABS module failure (Central Processing UnitInternal Circuit Malfunction) because you have a defective ABS unit. Check the power and ground connections to the ABS unit as a starting point for your diagnosis. Verify that the battery voltage is present on terminals 8-9-16 and the ground on 2425. It’s also important to record the current battery voltage when the car is running.

More information can be found at

Saturn Relay won’t start or is hard to start

The 5th of June, 2013 In the event of a no start or hard start situation Saturn’s Relay is a yearly event that takes place on Saturn’s day. If you own a Saturn Relay minivan from 2005-2007 and are having difficulty starting it or are unable to start it at all, this may be the solution for you. In addition, you may notice an inoperative fuel gauge, as well as a check engine, ABS, TCS, Service Traction System, or All Wheel Drive Disabled warning light on your dash, among other things (s). It may look as if your automobile has been taken over by a demon.

This connector may be found on the floor under the driver’s seat, at connector C305.

More information can be found at

Check engine light on ABS light on GM vehicles

The 10th of February, 2013 Fix On GM automobiles, the check engine light illuminates together with the ABS light, and the vehicle will not start or stall. Check engine light, ABS light illuminated, no start, stalls, and a variety of other electrical issues have been addressed by General Motors in technical service bulletin (TSB)06-06-04-049B for the cars mentioned below. Buick Century and Regal (from 1997 to 2003), Chevrolet Impala and Monte Carlo (from 2000 to 2003). Pontiac Grand Prix from 1999 to 2001 The following are the issues that must be addressed: Warning for the Anti-Lock Braking System The light is turned on MIL/Service is only available on an as-needed basis.

The engine will not begin to run.

Various electrical system breakdowns have occurred.

The root of the problem.

ABS pump runs continuously GM products

The 5th of January, 2013 Repair the ABS pump that is always running. GM products are those that are genetically modified. C0265 and C0267 are two of the most commonly used abbreviations. Many General Motors and GMC trucks may develop a problem in which the ABS pump motor runs continuously. The following cars are affected by the problem: Chevrolet Silverado 1500, 2500, and 3500 pickup trucks Chevrolet Suburban (also known as the Chevrolet Suburban XL) General Motors Astro Van Chevrolet Tahoe Cadillac Escalade GMC Sierra 1500 Sierra Denali GMC is a full-service vehicle dealership.

EBCMs are susceptible to failure if either the power or ground wires to the device are corroded or the associated device suffers water intrusion.

GMC/Chevrolet Braking & ESC Warning Lights –

Owners of General Motors cars, notably Chevrolet Silverado 1500 pickup trucks, GMC Sierra 1500 pickup trucks, and Cadillac CT6 sedans, have reported widespread problems with their vehicles’ computer systems, which have resulted in the illumination of warning lights. Many General Motors (GM) car owners have complained about warning signals from the Electronic Stability Control (‘ESC’) system, the Anti-Lock Braking System (‘ABS’), the ‘Check Engine’ light, and other warning lights. As a result of the warning messages, the car is frequently placed in a different driving mode, which has an impact on the vehicle’s braking, steering, and several other systems.

General Motors recently stated that it was recalling over 814,000 cars.

Electrical connections might become slack as a result, ‘which could result in an intermittent electrical connection or arcing.

The inconsistent connection might also result in arcing, which could create enough heat to cause damage to the surrounding material and raise the danger of a fire,’ says the author. The cars affected by these recalls include the following models:

  • Chevrolet Silverado 1500 pickup trucks, GMC Sierra 1500 pickup trucks, and Cadillac CT6 sedans are among the cars in which owners have complained about problems with their vehicles’ computer systems flashing warning lights. Many General Motors (GM) car owners have complained about warning signals from the Electronic Stability Control (‘ESC’) system, the Anti-Lock Braking System (‘ABS’), the ‘Check Engine’ light, and other warning indicators. As a result of the warning messages, the car is frequently placed in a different driving mode, which has an impact on the vehicle’s braking, steering, and other systems. There’s more to these lighted warning lights than just being a nuisance
  • General Motors recently issued a recall of more than 814,000 cars owing to faults in the vehicles’ electrical systems. ‘In certain 2019 model year Cadillac CT6, Chevrolet Silverado 1500, and GMC Sierra 1500 vehicles. a software error can, in rare cases, cause the vehicle’s electronic stability control (ESC) and antilock brake system (ABS) systems to be disabled for a single ignition cycle,’ according to documents filed by General Motors with the National Highway Transportation Safety Administration (‘NHTSA.’ Furthermore, during the manufacturing process, the battery cable rings in many vehicles were contaminated with adhesive residue. A loose electrical connection might develop as a result of this, ‘which could result in an intermittent electrical connection or arcing. The car might stall if there is an intermittent electrical connection between the B+ battery cable and the alternator. As a result of the intermittent connection, arcing may occur, which may create enough heat to cause damage to nearby materials and raise the danger of a fire.’ This recall affects the following models of cars.

Owners of General Motors vehicles have expressed widespread dissatisfaction with the electrical problems that have arisen as a result of these flaws. Many truck owners have expressed dissatisfaction with many warning noises and lights when driving their relatively new vehicles, for example. Owners of General Motors vehicles have reported receiving a warning from their ‘brake failure’ signal while driving, which was accompanied by abnormalities in the braking system. Frequently, the ‘brake failure’ light is illuminated in conjunction with a number of other warning indicators.

Recently, in December 2019, General Motors announced a number of recalls to fix the electrical problems that have arisen in these cars.

Our team invites you to contact us immediately for a free consultation if your General Motors vehicle has not lived up to your expectations, spent too much time in the shop, or startled you with a slew of flashing warning lights and sounds: The number is (833) LEMON-FIRM.

See also:  Chevy Malibu clunking noise?

2017 Chevy Silverado Check Engine Light

Please wait for the page to load completely.

Is it safe to drive your 2017 Chevy Silverado with the check engine light on?

This is a difficult question to answer since the severity of the problem is dependent on the severity of the question. If the problem is a small one, such as a loose gas cap, you should be able to continue driving without incident. The check engine light will often remain illuminated for a prolonged period of time. If you observe a change in the performance of your car, it might be a sign of a more serious problem lurking beneath the surface. If your Chevy Silverado’s check engine light is on and flashing, this indicates that there is a potentially dangerous problem with the vehicle, and it is suggested that you have it serviced as soon as possible.

Alternatively, slow down and bring your 2017 Chevrolet to one of our qualified experts as soon as it is possible.

2017 Chevy Silverado Check Engine Light Flashing

We know from years of offering Check Engine Light Diagnosis Service that there are several typical explanations for an illuminated Check Engine Light, including something as simple as a loose gas cap, despite the fact that there are several probable causes. Some of the other typical causes of a Check Engine Light include a problem with the fuel injection system, a broken emissions control part, a damaged oxygen sensor, a filthy mass airflow sensor, a bad head gasket, or a set of defective spark plugs, to name a few.

When this occurs, the Check Engine Light is turned off, and you may walk out of the repair shop certain that your Chevrolet problem has been resolved.

In order for the sensors to continuously monitor situations, they must also communicate data to the electronic control unit.

However, this is the limitation of the Check Engine Light – it will not tell you what is wrong with your vehicle or what you need do to fix it.

Our Check Engine Light Diagnosis Service isolates the root cause of the problem and offers you with an advice on what to do next from a Highly Qualified Service specialist, which is where Hare Chevrolet comes in.

2017 Chevy Silverado Check Engine Light Codes

When the check engine light shines on your vehicle’s dashboard, it may be rather frightening to see that small light suddenly illuminate, but in truth, it is not anything that should drive you to shut down in panic right immediately. If you hear the phrase diagnostic trouble codes (DTC), this is simply another name for the codes that appear on your dashboard when your engine is running. This is a list of automotive computer codes that have been saved by your Silverado’s ECM, commonly known as the OBD (on-board computer diagnostic system) system.

The fact is that, while it may seem intimidating at first, learning how to do simple diagnostics can provide you with valuable information about your car as well as allow the Check Engine Light to do what it was intended to do: serve as a guide.

Because there are hundreds of different OBD codes, there are also hundreds of conceivable causes for the indicator to be illuminated, including the following:

  • Problems with the computer output circuit
  • An old battery
  • Problems with the ignition system
  • Transmission problems Problems with the spark plugs
  • Problems with the emissions controls
  • Sensor for oxygen
  • Problems with the fuel and air metering systems
  • Gas cap that has come undone or that has gone missing

This is why it is critical for someone who does not have a great deal of automotive expertise to refrain from making assumptions about what a code indicates. When your check engine light illuminates, you should have it checked out by a qualified Chevrolet repair as soon as possible. Make a call to Hare Chevrolet at 3173336958 or book your check engine light service online right now! If the engine light turns on as a result of a major worry, you run the danger of further harming your vehicle if you do not address the problem right once.

How many miles can you drive with the check engine light?

If your check engine light is on and flashing, we recommend that you pull over and call Hare Chevrolet for assistance. We will determine if your car is safe to drive in or if a tow truck is necessary, and we will provide recommendations. It might be anything from a faulty sensor to faulty plug wires that require replacement. Attempting to comprehend the code and then planning your approach appropriately is the most prudent course of action. Each check engine code has a different level of seriousness associated with it, making it possible to forecast how many miles you can drive with the warning light illuminated.

Check Engine Light Service 2017 Chevy Silverado

What do you do when you’re traveling down the road in your Chevy Silverado and a yellow light appears on your dashboard, indicating that the engine needs to be checked? Your heart falls a little, if you’re like the majority of Chevy owners, since you have no idea what that light is trying to tell you or how you should respond. Stress can be exacerbated by apprehension about the unknown (or the potential expense of the unknown). But take a deep breath and understand that just because the light is on doesn’t mean you have to pull over to the side of the road and call a tow truck, it is highly advised that you have your 2017 Chevrolet Silverado examined as soon as possible to avoid further damage.

A computer in your 2017 Chevrolet Silverado’s ECM (electronic control module), which is the vehicle’s onboard computer, detects a fault in the electronic control system that it is unable to rectify, and the check engine light illuminates to alert you to the problem.

This code is scanned by our Chevy vehicle repair experts at Hare Chevrolet using an electronic scan instrument, which they use to diagnose the problem.

While this code will inform you of the problem that has been found, a true diagnostic will still need the services of a qualified expert to establish the problem and correct it.

How much does it cost to get the engine light checked?

Generally speaking, the typical cost of a check engine light diagnosistesting is between $88 and $111 dollars. The good news is that Hare Chevrolet provides comprehensive multi-point checks and free diagnostics, in the majority of situations, to assist you in determining the root cause of your check engine light malfunction. The check engine light can alert you to a variety of problems ranging from a loose gas cap to a more serious failure such as a bad catalytic converter or a problem with one of the car’s oxygen sensors, so it’s important to get a natural code reading and diagnosis as soon as possible after turning on the car.

Will the check engine light reset itself?

When the problem or code that caused the check engine light to illuminate is resolved, the check engine light on your 2017 Chevrolet Silverado will normally turn off by itself. For example, if a loose gas cap was the reason of your check engine light going on, once the cap is tightened, the light will turn off by itself within a few minutes. Similarly, if your catalytic converter is failing and you’ve been doing a lot of stop-and-go driving, the check engine light may have come on as a result of the large amount of time the converter has been put through its paces.

If you exceed that limit and the light remains illuminated, you will need to bring your vehicle into Hare Chevrolet so that the light and code may be examined and reset.

What could cause the check engine light to come on in a 2017 Chevy Silverado?

Your gas cap might be loose or need to be replaced if your check engine light turns on. If this is the case, tightening or replacing your gas cap could solve the problem. On the other hand, your vehicle’s check engine light might also be an indication of a significant malfunction that could cause serious damage to your engine and result in a large repair expense. The check engine light will either glow or blink depending on your vehicle’s make and model. A constant glow normally signals something less serious, however a flashing check engine light indicates that your vehicle’s engine is in significant condition and that quick assistance is required to fix the problem.

The following is a list of the most typical reasons why your check engine light may illuminate:

  • One of the most common and abundant causes is that the gas cap on your 2017 Chevrolet Silverado is loose, broken, or completely missing. The gas cap on your 2017 Chevrolet Silverado is used for a variety of functions. In addition to preventing gas fumes from being emitted when you are not driving, it also helps to maintain pressure within the fuel tank by securing the fuel system. What happens if you have a faulty gasoline cap on your vehicle? If your gas cap has been in place for a long time or has a burst seal, you may experience gasoline loss due to evaporation, resulting in repeated journeys to the gas station. Fortunately, replacing a gas cap is not a costly endeavor. If your 2017 Chevy Silverado’s check engine light comes on quickly after you put petrol in it, the first thing you should check is to make sure the cap isn’t loose — or that it’s still on the car’s roof or at the fuel pump. New Spark Plugs or Plug Wires are also required for your 2017 Chevy Silverado. The spark plugs in your car’s engine are the component of the engine that ignites the air/fuel mixture in the combustion chamber of the vehicle. This explosion is responsible for the movement of the pistons and the operation of the engine. The spark plug wires are responsible for delivering the spark from the ignition coil to the spark plugs in the engine. If your spark plugs or spark plug wires are damaged or have been in use for a long period of time, you may notice poor performance and lower power. Occasionally, your engine will have difficulty starting or continuing to operate in certain severe circumstances. A blocked catalytic converter, as well as damage to ignition coils and oxygen sensors, might result in more expensive repairs as a result of worn spark plugs and plug wires
  • As a result, what will happen if I do not replace your oxygen sensor? A defective sensor can have a negative impact on your miles per gallon, but it can also cause damage to your catalytic converter and the spark plugs in your 2017 Chevrolet Silverado. The oxygen sensor delivers data to the vehicle’s onboard computer, which uses the information to calculate the acceptable variation of air and fuel that reaches the cylinders of your engine. A faulty oxygen sensor can also cause a car to fail an emissions test
  • Problems with aftermarket parts are also common. The incorrect installation of an aftermarket alarm, exhaust, or other accessory on your 2017 Chevrolet Silverado might do serious damage to the vehicle’s performance. These aftermarket components and accessories have the potential to deplete the battery, cause the check engine light to illuminate, or even prevent the car from starting altogether. If these problems seem familiar, bring your Silverado to Chevy and let our team of qualified mechanics check to be sure your aftermarket parts were fitted correctly and aren’t the source of the problems. Getting accessories, particularly aftermarket parts and accessories, or utilizing OEM components in the first place may cost a little bit more, but it may save you money in the long run by avoiding the expense of having to rectify faulty work and damage caused by poor installation work. Your catalytic converter has failed or is about to fail. The catalytic converter is a component of the exhaust system on your 2017 Chevrolet Silverado. One of the functions of the catalytic converter is to convert the carbon monoxide produced during the combustion process into carbon dioxide. A broken catalytic converter is frequently the result of poor maintenance, which is why Hare Chevrolet includes a comprehensive multi-point examination with every Chevy service appointment. The failure of your 2017 Chevy Silverado’s catalytic converter to be fixed will result in it failing an emissions test, exhibiting poor engine performance, as well as a reduction in overall fuel efficiency. A greater temperature may be reached by your vehicle, which may result in further difficulties as a result of overheating. There is a vacuum leak in your 2017 Chevrolet Silverado. Each Chevrolet Silverado is equipped with a vacuum system that is capable of performing a wide range of tasks. The vacuum system also contributes to the reduction of hazardous emissions by directing fumes away from the engine when fuel evaporates through it. Whether your engine’s RPM is high at idle or surges at random, a vacuum leak might be the source of the problem. It is necessary to replace your mass airflow sensor (also known as the MAF) if your vacuum hoses have become dry and cracked over time, particularly if they have been exposed to high temperatures or extreme cold. In your Chevy Silverado, the mass airflow sensor measures how much gasoline is required to operate your engine effectively by monitoring the amount of air that enters your vehicle’s engine. The mass airflow sensor, which is a component of the engine management system, assists the engine in adjusting to wide changes, such as altitude. A defective mass airflow sensor, or an O2 Sensor (Oxygen Sensor), in your Chevy Silverado may cause difficulty starting, rough idling, or a rapid shift in the position of the throttle pedal. Your O2 Sensor (Oxygen Sensor) must be replaced. The Oxygen Sensor, often known as the O2 sensor, is responsible for measuring the quantity of oxygen present in your exhaust. It is possible that there is too much oxygen in your exhaust system, causing the gasoline to burn more quickly and making your car less available when it comes to fuel economy
  • The battery is low or dead. Each component of your 2017 Chevrolet Silverado’s battery is critical. Your car won’t start, it won’t illuminate the road ahead, it won’t play the radio, and it won’t charge your phone if it doesn’t have a battery. Car batteries today last far longer than they did only a few decades ago, and they require little to no maintenance. Prices for new Chevrolets vary depending on the model you drive, but you may save money by taking advantage of our current servicing discounts and promotions.
See also:  My coolant light is on but not low on coolant?

What Does the Check Engine Light Mean?

The check engine light on your 2017 Chevrolet Silverado is one of the most frequently misinterpreted lights or indications on the vehicle. The check engine light is a feature of the onboard diagnostics system, and it can be shown in a variety of ways depending on the vehicle. An engine symbol, a message such as ‘Check Engine,’ or a mix of the two are all possible with a check engine sign. Depending on the color of the light, it will either be amber or red. It is a component of the diagnostics system present in your car.

Some of these tasks include adjusting the ignition timing of an automatic gearbox, managing the engine speed, and applying stability control, to mention a few examples.

It might be anything as easy as your gas cap being loose, or something as catastrophic as your engine knocking out of whack.

Our Chevyservice department can assist you in determining which code is causing your check engine light to illuminate or in diagnosing the cause of your check engine light blinking. Make contact with Hare Chevrolet right away!

2017 Chevy Silverado Check Engine Light

A flashing light indicates that there is a serious problem with the vehicle, and that if it is not addressed promptly, it might result in significant damage to the vehicle. If the check engine light on your 2017 Chevrolet Silverado begins to flash, it indicates that there is an issue that requires immediate attention, and your vehicle should be taken to a dealership right once. An engine misfire that causes unburned gasoline to be spilled into the exhaust system is generally the cause of this blinking light being activated.

Some owners wonder if spark plugs are responsible for the check engine light flashing.

It is possible for an engine to misfire due to a faulty, outdated, or filthy spark plug.

It is possible that if the problem is not addressed or if you continue to commute, the problem can extend to the spark plug wires, catalytic converter, or ignition coils, resulting in an extremely expensive repair.

9 Things to Check When Your ABS and Brake Light Are On

The anti-lock braking system is comprised of a complicated network of computers and sensors. A rapid, reactive system that can increase brake control under all driving circumstances is ensured when all of the components are operating in perfect harmony. It is common for lighted gauge cluster lights to be the first indication of a problem with this system. When a malfunction is discovered, the ABS light will be the sole one to glow on the majority of automobiles. What happens if the ABSBRAKE lights on your automobile or truck are both illuminated?

Two Different Lights, Two Different Meanings

For as long as anybody can remember, the ‘BRAKE’ light has indicated that something is wrong with the braking system. The most typical causes of this indicator being illuminated are low brake fluid or a parking brake that has been engaged. On other vehicles, however, it might just signify that there is an issue elsewhere in the system, and it can be flashed quickly if there is an ABS malfunction. Unlike the BRAKE light, which is controlled by a mechanical switch, the ABS light is often controlled by a computer module.

For the most part, a simple circuit containing only one or two components is responsible for turning on the BRAKE light.

However, not all vehicles are created equal, and some of the first ABS systems would illuminate both warning lights simultaneously in the event of an ABS failure.

Common Triggers

It’s critical to understand what to look for when analyzing the source of one or both of these lights on your vehicle’s dashboard. Each light has its own set of triggers, some of which are shared across the two lights and others which are not.

ABS light:

  • Low battery voltage (the computer isn’t getting enough power from the battery)
  • Breaking the wheel speed sensor wire
  • A bad wheel bearing
  • Dirt on the tone ring
  • And a faulty ABS module

BRAKE light:

  • Low brake fluid
  • Low brake pads
  • Parking brake set
  • Any ABS fault (which may be illuminated in conjunction with the ABS light on some cars)
  • Any other malfunction.

Most ABS codes may be read by OBDII-based diagnostic equipment for vehicles built in 1996 and after, depending on the year of the vehicle. On older cars or in unusual circumstances, a make-specific tool, which is often kept by dealerships or independent shops, must be utilized. Whatever light is on, don’t disregard it for an extended period of time. The presence of a flashing ABS or BRAKE light is not only a small irritation, but it may also have an impact on the vehicle’s resale and trade-in value, and it may cause some confusion when the car is taken in for inspection.

Chevy Service Stabilitrak & Traction Control Lights – Diagnosis & Fix

Stability control and traction control service lights showing on the dash of Chevy pickups and suburbans from the early to mid 2000s are a typical problem on these vehicles. The warning lights show repeatedly when the truck is idling, then disappear and reappearance while the truck is going, according to the majority of truck owners. Most of the time, the ‘Service Stabilitrak’ indicator will illuminate first, followed by the vehicle turning off traction control. As soon as the traction control is switched off, the transmission starts shifting very aggressively and with jerky motion.

In addition to extremely difficult shifting, other symptoms include loss of engine power and/or limp mode.

What is Stabilitrak?

Traction control, as the name implies, aids in the acquisition of traction on low-traction surfaces like as snow and ice. Stabilitrak is another type of ‘electronic stability control’ system, however it is used for a different reason than traction control, as explained above. During times of poor road grip, traction control will restrict power to certain wheels, allowing your Chevrolet to go from stop to start more quickly. When your automobile is already going, Stabilitrak assists you in maintaining a straight course.

If you are driving on a slick road and your vehicle begins to fishtail, Stabilitrak will intervene to assist you in correcting your course.

Through sensors, Stabilitrak communicates with your Chevrolet’s stability control system, as well as with your wheels and steering wheel, as well as with your brakes.

Several difficulties might cause the ‘Service Stabilitrak’ light to illuminate in your Chevrolet due to the fact that it is a related system.

What Causes the Service Stabilitrak Light?

Despite the fact that the system is connected to steering, braking, and traction, a variety of engine and other problems might cause this warning light to illuminate. In general, we have witnessed Service Stabilitrak as a result of a small number of challenges. And it appears that the exact fix for this problem varies greatly from car to vehicle. The following are the most likely reasons, listed in my best effort to rank them in order of frequency of occurrence:

  • E85 Fuel: Many individuals have reported that their service stabilitrak light has disappeared after driving their tank dry on E85 fuel and then switching back to standard gasoline
  • E85 Fuel
  • Attempt to switch off Active Fuel Management (see our tutorial on how to turn off AFM for more information)
  • The failure of the throttle position sensor, or the presence of a defective throttle body assembly
  • A bad steering wheel position sensor
  • A bad throttle position sensor
  • Tire pressure monitor sensors
  • An ABS sensor
  • A bad brake switch and a bad body control module
  • Engine misfires / old ignition coils and spark plugs
  • A bad fuel pump (which does not appear to be very common)
  • A bad lifter failure (which appears to be less common)
  • A bad fuel pump and a bad lifter failure

Unfortunately, when it comes to detecting the problem, the dealerships are often ineffective in their efforts. Codes are seldom shown for this condition, and the occurrence is highly sporadic, making it difficult to determine the source of the problem. Additionally, as seen above, a variety of factors have been identified as contributing to this problem, with the resulting solution varying from one person to the next. It looks that the most of the problems are caused by gasoline, AFM, or anything in the vicinity of the throttle body.

E85 fuel appears to be the most common source of the problem, so my first advise is to try using conventional gasoline for a tank or two and then switch off AFM if the problem continues to occur afterward.

I tried my hardest to make sense of all of the facts.

I made every effort to list all of the common causes that I could identify.

Symptoms of Stabilitrak and Traction Control Issues

  • Hard shifting
  • The appearance of warning lights
  • The loss of power / the use of limp mode
  • Trouble codes that have surfaced in conjunction with the problem are as follows:
  • C0561: ABS is not operational
  • P0011: Camshaft Positioning A
  • P0521: Engine Oil Pressure Sensor
  • P0121: Pedal Position Sensor
  • C0561: ABS is not operational. *Obtaining no engine codes is a common occurrence*

Can I Keep Driving with the Stabilitrak Light On?

Even with the stability control and traction control lights illuminated, your Chevrolet pickup is still drivable. In most cases, though, you will sense a loss of power, and 90 percent of the time, this will be followed with difficult changes. Hard shifts are not good for a transmission, even if they are still drivable. In most cases, hard shifting is caused by a lack of transmission fluid, which means that the metal components within the gearbox are grinding against each other with a great deal of friction.

Despite this, the internal transmission components are grinding against one other quite aggressively, which is what gives the ‘hard shift’ sensation.

While keeping this in mind, it is not advisable to drive while hard shifting because it can cause major wear and tear on your gearbox.

Service trailer brake system and ABS light

14515B: Product Safety – Internal Contamination of the Chassis Electronic Control Module – Chassis Electronic Control Module (Feb 2, 2015) Subject: 14515B – Internal Contamination of the Chassis Electronic Control Module Models: Buick Enclave (model years 2009-2014) Cadillac CTS (from 2009 to 2014) (VIN D) Cadillac Escalade and Escalade ESV models from 2008 to 2014. Chevrolet Avalanche from 2008 to 2013. Chevrolet Colorado (model years 2009-2012) Chassis for the Chevrolet Silverado HD Cab from 2007 to 2014.

Chevrolet Express (model years 2008-2014) Chevrolet Impala ‘W’ model years 2012-2014 2009-2014 Chevrolet Traverse Chevrolet Silverado 2007-2013, Chevrolet Silverado HD 2007-2009, Chevrolet Silverado HD 2014 GMC Canyon (model years 2009-2012) GMC Sierra models from 2007 to 2013.

GMC Yukon and Yukon XL models from 2008 to 2014.

Chevrolet Captiva (2014 model year) Saturn Forecast for 2009 Saturn VUE for 2008-2009 As part of the revision, the components information chart will be updated to include modules that are compatible with RPO JL1, and the labor time chart will include pickups from the 3500 series.

It is unlawful for a dealer to deliver a new motor vehicle or any new or used item of motor vehicle equipment (including a tire) that is covered by this notification under a sale or lease until the defect or noncompliance has been corrected under federal law.

Following completion of the servicing procedure described in this advisory on the vehicle, the vehicle is removed from stop delivery and can be delivered to the client as scheduled.

If you have any questions, please contact us.

Some of these cars were produced or serviced with contamination in the chassis electronic module, which was discovered afterwards.

It is possible that the module will encounter an electrical short, which will cause the car to show the check engine light, stall, or fail to start.

This state, along with the fact that the car is moving, might result in an elevated risk of a vehicle collision.

This state, along with the fact that the car is moving, might result in an elevated risk of a vehicle collision.

Vehicles that were involved On the Investigate Vehicle History page of the General Motors Global Warranty Management system, all of the concerned vehicles are recognized by their Vehicle Identification Numbers.

Due to the fact that not all identical cars, regardless of their description or option content, may be eligible, it is critical to utilize this tool on a regular basis to ensure eligibility.

Dealers will not have a report accessible if they do not presently have any related automobiles allocated to them.

In numerous states, provinces, and nations, the use of such motor vehicle registration data for any reason other than the follow-up necessary to complete this recall is considered a violation of the law.

Consequently, you are strongly advised to limit the use of this report to the follow-up necessary to complete this recall process.

Leave a Comment

Your email address will not be published. Required fields are marked *