Ford Focus warning light on?

mainlandford.com

  • Your Ford Focus’s ABS Light comes on when it fails a self diagnostic cycle. When on, it indicates that the Focus does not have Anti-Lock brakes, and the safety they provide. Your Focus’s ABS system uses a system of sensors to determine wheel speed when braking.

What does this light mean on my Ford Focus?

Dashboard warning lights may illuminate red, orange, green or blue, red indicating a more serious malfunction where the vehicle should be checked immediately. Orange lights indicate less serious issues such as the vehicle needing a service. Flashing red warning lights indicate an urgent malfunction.

What does the exclamation mark mean on a Ford Focus?

This indicator light may look like a horseshoe with an exclamation mark inside it, but it’s meant to symbolize an underinflated tire. Check your tire pressure and add air as needed. If the light is flashing, have the system inspected. If the light remains on, then there could be a problem.

Why is there a warning light on my dashboard?

There are two main types of dashboard warning lights: red and orange. A red warning light generally indicates a serious issue with your car. You should act quickly if your dashboard warning light is red – it could be an overheating engine, low engine oil pressure or a braking system problem.

Can you drive with a warning light on?

The rule of thumb is that if the check engine light is flashing, you can’t keep driving the car. It’s an emergency. Often it indicates an engine misfire. If you keep driving, you will likely cause irreversible damage, mostly to the (expensive) catalytic converter.

How do you reset the engine warning light on a Ford Focus?

The first method you should try if you’re trying to get the engine management light off on your Ford Focus is to turn the vehicle off and on a few times. First put the key in the ignition and then move it from off in to the run position and then wait 1 to 2 seconds. Repeat this three times in a row.

What does the lighting control light mean?

The term lighting controls is typically used to indicate stand-alone control of the lighting within a space. This may include occupancy sensors, timeclocks, and photocells that are hard-wired to control fixed groups of lights independently. Adjustment occurs manually at each devices location.

What is the yellow light with an exclamation point?

The tire pressure warning light is depicted as a yellow tire with an exclamation point in the middle. This warning light signifies that one of the vehicle’s tires is underinflated, and – in some modern vehicles – it can indicate which exact tire has low pressure.

What does yellow exclamation mark mean on Ford?

Low Tire Pressure: This light indicates that your tire pressure is low. This symbol illuminates for a brief second when you turn the engine on to indicate that it’s functional. If it remains lit while your vehicle is running, check your tire pressure as soon as possible.

What does orange exclamation mark mean in car?

Tire pressure warning light This dashboard light looks like a tire with an exclamation point in it and means that the tire pressure in at least one of your tires is low and underinflated. You’ll want to check your tire’s air pressure immediately.

What do you do when the temperature warning light comes on?

If the temperature light goes on or if the gauge enters the red zone immediately pull off the road to a safe spot, well away from traffic, and stop the engine. Wait 20 minutes, start up the engine, and if the temperature light comes on, proceed directly to the nearest garage with a mechanic.

What are the differences between an orange warning light and red warning light?

Red is the equivalent of stop, and means the problem needs investigating immediately; orange or amber is an advisory signal, suggesting drivers will need to take action; and green says all is clear and serves as a helpful reminder. Here’s a helpful guide to the most common dashboard warning lights.

What does the engine warning light look like?

Check engine lights come in orange, yellow or amber, depending on the manufacturer. If the light begins flashing, however, it indicates a more serious problem, such as a misfire that can quickly overheat the catalytic converter.

Is engine warning light an MOT failure?

Yes, your car will fail its MOT if your Engine Management Light remains on when the engine has been started. Under the new MOT rules, it is now classed as a major fault. If your light is on constantly, or it’s flashing, you should have your car checked at a garage.

How long can I drive with the gas light on?

Generally speaking, you will be able to drive between 30 and 50 (0r more) miles even after the light comes on. Which means that even if the gas light comes on, it may not be time to panic yet.

How long can you drive with oil light on?

Generally speaking, you have about 2 weeks or 500 miles of driving before a flashing oil light turns into a legitimate problem. But once it hits that point, things can go downhill fast, leading to serious mechanical damage. So, try to get your vehicle into a mechanic sooner rather than later.

Ford Focus Dashboard Warning Lights and Symbols

There are various dashboard warning lights / symbols with pictures and their meanings to be found in the Ford Focus series, and this section covers many of them. Dashboard warning lights may display red, orange, green or blue, red signifying a more serious fault where the car should be checked promptly. Orange lights indicate less significant problems, such as the need for a service on the vehicle. Flashing red warning lights signify an urgent malfunction. The information provided by the green or blue dashboard light symbols is limited to the driver.

When the engine ignition is turned on, some Ford Focus dashboard warning lights will activate, including the ones listed below:

  • Airbag, anti-lock braking system, electronic stability control (ESP), low gasoline, brake system, frost, ESP turned off

Stability control (ESP) is turned off because of a low gasoline level. Airbags are also turned off because of a low fuel level.

Grade Assist

When traveling downhill, Ford Grade Assist assists the driver in maintaining vehicle speed. Grade aid can be triggered by pressing a button on the dashboard or the gear lever, depending on the vehicle. The use of grade assist helps to avoid excessive strain being placed on the gearbox or the brakes. The Ford Focus ABS dashboard warning light illuminates.

ABS warning light

It is possible that the Ford Focus ABS dashboard warning light will appear while driving, indicating that there is a problem with the Anti-lock Braking System (ABS) (ABS). Normal braking will continue to function even if the ABS is turned off. A trained technician should be called in to inspect the system as soon as possible. In order to learn more about how Anti-Lock Braking Systems (ABS) operate, see the Anti-Lock Braking Systemguide, which describes what ABS systems do, how they work, and how they aid drivers in maintaining control of their automobile.

Ignition warning light

If the ignition warning light activates while you are driving, it indicates that there is a problem with the vehicle. Remove any unneeded electrical equipment from the car as soon as possible, and get the vehicle inspected by a qualified mechanic right away. For further information, see Why is the battery warning light illuminated. The Ford Focus airbag dashboard warning light illuminates while the vehicle is in motion.

Airbag dashboard light

When the engine is started, the symbol should be extinguished. If the light shines while you are driving, it indicates that at least one of the air bags is not working properly. Check examine this article on why is the airbag light illuminated for more information on airbags and related problems. The Ford Focus’s oil pressure warning light illuminates on the dashboard.

Oil pressure warning light

If the oil pressure indicator remains on after the vehicle has been started or glows while the vehicle is being driven, this indicates a problem. Stopping the car and turning off the engine should be done as soon as it is safe to do so.

Ensure that the engine oil levels are correct – read how to check engine oil – but do not continue on your travel even if the oil levels are correct. The Ford Focus engine warning light illuminates when the vehicle’s engine is running.

Engine warning light

When the engine is operating, the engine warning light should be turned off as well. If the light comes on while the engine is running, it indicates that there is a problem. If it flashes while you’re driving, you should drop your speed immediately. Continue to avoid extreme acceleration or deceleration, and seek expert assistance if the light continues to flash. The Ford Focus’s blind spot monitor has a warning light on the dashboard.

Blind spot monitor light

When the blind spot monitor feature is turned off or when a message is displayed, the light on the blind spot monitor will glow. Car blind spot provides further information on what a blind spot is and the proper measures to employ in order to prevent a collision. Symbol for the forward alert warning light

Forward alert warning

Whenever the forward alert function is deactivated, or when a message is received, the forward alert warning light will glow. This technology alerts you of a potential accident in front of you through the use of visual and audio notifications. Only when the system is active will collision notifications be issued, despite the fact that brake assistance is always on. The Ford Focus is equipped with a frost / ice warning light.

Frost / ice warning light

The presence of frost or ice is indicated by this snowflake sign, which alerts the motorist. Sensors measure the temperature of the outside air. When the outdoor air temperature outside the vehicle is between +4°C (39°F) and 0°C (32°F), the warning light sign will glow in amber color to alert the driver. When the temperature drops below 0°C (32°F), the light will turn red. The traction control warning light on the Ford Focus is illuminated. Traction Control (Traction Control System) (older models)

Traction control light

Following the activation of the traction control system, the traction control dashboard light will blink during normal driving. If the sign does not flash when the ignition is turned on, or if the symbol illuminates continually while driving, it indicates a failure with the vehicle. The system is disabled while it is experiencing a problem. It’s also important to note that the second light indicates traction control, which is visible on earlier Focus models. The Ford Focus’s traction control warning light has been turned off.

Traction control off light

If the traction control is turned off manually, the dashboard warning light will glow to indicate this. Once the traction control system has been re-activated, the light will turn off automatically. The cruise control indication light on a Ford Focus is illuminated.

Cruise control indicator

When a speed has been chosen and cruise control has been enabled in the Ford Focus, the cruise control indication dashboard light will glow. the indication sign for the Ford Focus’s front fog lights

Front fog light symbol

When the front fog lights are turned on, this dashboard icon will come on to indicate that they are on. When the back fog lights are turned on, the emblem is turned around. The Ford Focus’s lane departure warning light is on.

Lane departure warning

This light will glow when the lane departure warning system has been disengaged or in connection with a message.

The technology keeps track of lane discipline and issues warnings when a lane is drifting. The gear indicator light on a Ford Focus is illuminated.

Gear change indicator

In order to alert you that shifting to a higher gear would result in improved fuel efficiency, the gear shift / change indication light will glow on the dashboard. Periods of rapid acceleration, braking, or when the clutch pedal is depressed result in the light not being illuminated. The Ford Focus message indication light is located on the dashboard.

Message indicator light

In the event that a new message is saved in the information display, the dashboard light will glow. Depending on the severity of the message, the message indicator may be red or amber in color. The Ford Focus’s engine start/stop light is illuminated.

Engine start/stop light

When the engine is turned off in conjunction with start/stop technology, this indicator glows on the dashboard. This method lowers fuel usage while also lowering CO2 emission levels. Ford Focus warning light with a red exclamation mark and a red cog.

Powertrain warning light

The presence of a red cog and a red exclamation point on the warning light indicates a problem with the powertrain. Glow plug relay failure or glow plug failure is the most common cause of this problem. Glow plugs themselves are also a common cause. The results of the diagnostics will clarify the precise nature of the problem. The vehicle is completely safe to operate. The Ford Focus’s ESP warning light is illuminated.

ESP/BAS warning light

The ESP/BAS Ford Focus warning light is associated with the anti-lock braking system. It indicates that there is an issue with the Electronic Stability Program if this light is on. Aside from the ABS warning indication, the ESP/BAS light will frequently be illuminated. Tire Inflation Pressure

Tyre Pressure warning light

Early models of the Ford Focus may not have had the tyre pressure monitoring system (TPMS) integrated into the vehicle. To alert the driver that their tire pressure has dropped to or below the 25 percent threshold level, a tyre pressure warning light will activate on the dashboard. If you have checked your tyre pressures and they are all right, but the tyre pressure warning light continues to illuminate, you should get assistance. Check out our guide on how to reset the Ford Focus tyre pressure light if you’ve already fixed the pressures and need to turn the light off.

See also:  Do engine additives work?

The low tyre pressure warning light comes on.

Other vehicle warning lights

Have you ever been driving down the road, taking in the scenery and listening to some excellent music, when all of a sudden you hear a beep and notice a light flashing on the dashboard? It may be a very stressful situation: While driving down the road, away from home, a warning light flashes on your dashboard, signaling that something is wrong. In the midst of terror, many drivers wonder: “Should I pull over? Should I continue driving?” Is it possible that I damaged my car? “Am I going to make it home?” This is the problem.

There are several warning lights and warnings on each Ford instrument cluster, and not all of them are detrimental.

Dashboard warning lights, also known as dashboard symbols, are intended to alert you to the presence of a problem with your car on the dashboard.

The majority of warning lights do not indicate that a vehicle is on the verge of failing.

Minor failures, such as a loosened gas cap, can cause warning lights to illuminate, causing many drivers to be startled. Fortunately, all dashboard symbols are color coded, which makes it simple to choose your next line of action while looking at your dashboard.

What do dashboard light colors mean?

A distinct part of the vehicle’s system is represented by each warning light, which is color-coded according to the severity of the problem. Only a flashing red light indicates that you must stop quickly. On most dashboards, there are three different hues of dashboard lights: yellow, red, and orange (and, occasionally, blue or green). The most serious notifications are indicated by the color red or orange on the screen. In general, if you notice an orange or red warning light, pull over as soon as it is safe to do so and drive gently until you can figure out what is going on with the vehicle.

Ignoring a yellow light can soon escalate into a significant issue, so don’t ignore it.

Finally, green or blue (and rarely white) lights indicate that a certain component or system, such as high beams, has been engaged and is functioning correctly.

You must also look at the symbols in order to fully comprehend what is going on with your vehicle.

What do the dashboard symbols mean?

Each of the dashboard symbols represents a different part of the vehicle. Color, system, relevance, and other factors can be used to group these symbols together. Check out some of the most prevalent dashboard warning lights and their accompanying systems in this article. Engine Light: The check engine light is one of the most sensitive lights on a Ford, and it has two different warning levels. When there is a less significant problem (assuming that the vehicle is working correctly), the light will remain illuminated but will not flash.

  1. Don’t go behind the wheel of the automobile.
  2. The check engine light can illuminate for a variety of causes, ranging from an incorrectly closed gas cap to a malfunctioning catalytic converter.
  3. If it comes on, do not hesitate to act.
  4. A faulty Anti-Lock Braking System (ABS) light illuminates when the vehicle’s standard braking system is functioning properly, but the ABS is malfunctioning.
  5. Brake Lights: When the brake lights are lighted while the engine is running, the parking light is activated.
  6. Either your brake fluid is low, or there is a failure in your braking system, whichever is the case.
  7. Charging System: If you are driving while this light is on, turn off any unneeded electrical equipment that you may be using and take your vehicle to a qualified repair as soon as possible.

Remove the car from the road as soon as possible and let the engine to cool completely.

Check the amount of your coolant.

High Engine Oil Pressure: This is one of the most serious warning lights on the dashboard.

Depending on the situation, either your oil is low (and driving can shorten the life of your automobile) or there is a major failure inside the system.

Fuel is running low: This is one of the most frequent and least frightening warning lights on a vehicle’s instrument panel.

When this light comes on, your owner’s handbook will inform you how much gasoline is left in your vehicle, but it’s best to buy petrol as soon as you can after the light comes on.

When you switch on the engine, this sign lights for a brief second to show that the engine is operational and ready.

Check with a specialist as soon as possible if your car’s ignition system begins to flash or does not ignite when the vehicle is turned on.

Is the warning that is shown on your dashboard still not visible to you? The table below contains a comprehensive collection of dashboard symbols and their respective meanings.

Who do I contact about a persistent light?

Symbols on the dashboard represent several aspects of the vehicle. Color, system, and relevance are all factors that might be used to group these symbols. Check out some of the most prevalent dashboard warning lights and their accompanying systems in this article. A warning light on a Ford’s dashboard, the check engine light is one of the most sensitive lights on the vehicle. It has two degrees of alert. When there is a less significant problem (assuming that the vehicle is working correctly), the light will remain illuminated but will not flash continuously.

  1. The car must not be operated by anybody.
  2. For a number of causes, including incorrectly shutting the gas cap and catalytic converter failure, the check engine light may illuminate.
  3. Take action immediately if the light turns on!
  4. A malfunctioning Anti-Lock Braking System (ABS) light illuminates when the vehicle’s standard braking system is functioning properly, but the ABS is not functioning properly.
  5. Make a service appointment for later today to get this problem addressed.
  6. If this light comes on while you’re not driving, check to see that the parking brake is not engaged, and if it is, then check the brake fluid levels in your vehicle.
  7. Make a scheduled appointment with your local dealer as soon as you are able to.

Vehicle Internal Temperature Exceeds Normal: This light illuminates only when the vehicle’s internal temperature exceeds the normal range.

You have most likely ran out of coolant or there is a significant problem with the temperature gauge, which is more likely.

If you’ve reached the proper amount, don’t move your automobile; instead, have it towed to the nearest repair shop.

If this happens, you must pull over and turn off the engine immediately.

You should not use your car until the matter has been settled completely.

There are many other types of warning lights, but this is perhaps the most frequent and least dangerous.

You may check your owner’s handbook to see how much gasoline is left in your vehicle when this light comes on, but it’s best to fill up with petrol as soon as possible if this light comes on.

As soon as you switch on the engine, this indicator flashes for a brief second, indicating that it is operational.

Check with a professional as soon as possible if your car’s ignition system begins to flash or does not glow when the vehicle is first powered on.

Even if you look at your dashboard, you may be missing the warning that is flashing. You can find a complete list of dashboard icons and their meanings in the table below.

Meaning of Ford Dashboard Warning Lights

Those venerable dashboard illuminations. We’ve grown to adore them, but we’ve also grown to despise them, especially when we don’t understand what they’re trying to say. We are all aware that they are attempting to communicate something significant to us, but what is it? There are a few dashboard lights that we can all identify and possibly figure out what they are supposed to indicate, but there are other dashboard lights that even the most experienced drivers couldn’t figure out. By getting to know the actual meaning of Ford dashboard warning lights, you will be able to diagnose the problem your Ford car could be having and be able to solve the issue with ease.

The following Ford dashboard warning lights reference guide will provide you with all of the information you need to be aware of.

Color of a Ford Dashboard Warning Light

There is more to understanding what the dashboard warning light signifies than simply understanding what it indicates; the color of the light is also crucial and can reveal more than you ever imagined. In addition, the lights may flash, which indicates that the system is attempting to bring your attention to a more significant and time-sensitive problem. If the orange or red warning light on your Ford dashboard illuminates, this may indicate that your vehicle is suffering an issue that needs to be addressed as soon as possible.

When a warning light is illuminated in yellow, your Ford is attempting to inform you that servicing may be necessary, or at the at least, that you should have a technician interpret the significance of the warning lights.

While it may not be realistic to memorize all of your Ford’s dashboard warning lights meanings, you should at least have a fast reference guide to them.

More from Kimber Creek Ford:

Tips and Tricks was written by admin and uploaded on September 20th, 2016 at 4:39 pm. It is currently listed as a “Service and Maintenance” article in the Tips and Tricks category. This article will be updated when new answers are posted to this entry’sRSS 2.0feed. Commenting and pinging are temporarily closed for this post.

Ford Focus Dashboard Light Guide

The dashboard of your automobile might be a confusing area, especially if you aren’t familiar with all of the dashboard lights on the instrument panel. Understanding the meaning of these brightly colored symbols will not only help you enhance the performance of your car, but it will also help you increase the overall safety of your vehicle.

Using our FordFocus dashboard light guide, we hope to educate drivers in the Los Angeles, Long Beach, and Downey areas on the most critical lights to look out for on their dashboards. Any queries you may have may be answered by contacting the Norm Reeves Ford Superstore in Cerritos.

Brief Introduction to Warning Lamps and Indicators

On the Ford Focus, there are more than 25 dashboard lights, all of which are classified as warning or indicator lamps. The majority of these lights will illuminate briefly as a normal check and then switch off when the engine is turned on. If a light remains illuminated or illuminates while driving, there may be a problem. Important to remember, however, is that some of the Ford Focus dashboard lights are intended to show control settings, such as the danger lights or a turn signal, rather than a significant fault.

Ford Focus Dashboard Lights

  • Engine oil: No, that isn’t a dripping faucet
  • It is an old-fashioned oilcan, and the presence of this light indicates that there has been a fault with the engine oil system. Check the oil level in your car as soon as you are able to do so safely and stop and switch off your vehicle. If you have plenty of oil in your car, do not attempt to drive it
  • Instead, contact a trained mechanic immediately.

For the front airbag, if you observe a light that portrays a sitting passenger wearing a seat belt and holding a huge circle on their lap, you should contact a Ford approved repair shop immediately. This signal, which might be either continuous or flashing, indicates that the front airbag system is malfunctioning. Keeping the lanes clear: What looks to be a bird’s-eye view of a car between two dashed lines is actually a message from the Lane Keeping System informing you that it is active. There is no need for the driver to take any action.

Check the pressure in your tires and add air if necessary.

  • Powertrain fault: The vehicle’s manner of informing you that a powertrain or all-wheel drive issue has been identified is represented by the double-ended wrench. Due to the seriousness of the situation, you should get your car examined immediately
  • Control of Stability: This dashboard light is represented by an automobile with two wavy lines below the car’s wheels. This signifies that the system is currently operational and that it will be turned off soon. If the light remains on, it is possible that there is a problem. Make sure your vehicle is examined by a qualified mechanic. (Keep in mind that if the word OFF shows under this light, it indicates that the driver has switched the system off. The stability control system should be turned on to take use of its capabilities.)

Don’t See the Light You’re Looking For?

  • Please contact our service staff at Norm Reeves Ford Superstore in Cerritos if this Ford Focus dashboard light guide does not address the exact light that you are seeing. We are proud to serve the communities of Los Angeles, Long Beach, Downey, and the surrounding areas. We can assist you in determining what is wrong with your Ford Focus and scheduling a repair appointment if necessary.

Ford warning lights – what they mean and what to do

Unsure of what that yellow flashing sign on your Ford’s instrument panel means? Read our guide to learn what each of the warning lights indicates and what you should do if one of them appears on your dashboard. Modern Ford automobiles – including popular models such as the Focus, Fiesta, Transit, Ka, and Ranger – are packed with a plethora of sensors that continuously monitor the performance of each system in the vehicle. The dashboard’s lights indicate which systems are currently in operation and signal when one of those systems is not functioning properly.

  • Green indicates that the system is operating well or that it is actively in use. Yellow: something is not operating properly – exercise additional caution and investigate the problem as quickly as possible
  • A red light indicates that there is a significant and perhaps deadly problem – pull over as soon as it is safe to do so.
See also:  AC light blinking Chrysler Minivans?

But what exactly do all of those different symbols mean, exactly? In this tutorial, we’ll explain what the different yellow and red warning lights on your Ford dashboard indicate, why they come on, how serious the situation is, and what you should do if you see them.

Brake system warning light

Because your car’s brakes are one of the most vital safety elements, it’s critical that you respond quickly if you notice this warning light. Depending on whether the light is red and remains on after you have fully released the parking brake, or if it illuminates while you are driving, it might signal that the brake fluid level is low. This will be a job for the pros unless you are familiar with how to check your brake fluid levels on your own. If the ABS (Anti-lock Brake System) warning light is activated as well, this indicates that the braking system has malfunctioned and that your brakes may not be functioning as they should.

Avoid taking a chance on the road if your brakes aren’t working properly: dial 911 for assistance.

If you want support, you may contact the RAC on 0330 159 1111, regardless of whether you are a member. You can also acquire quick coverage, which may be more cost-effective if you are not a member of the organization. Find a parking space in a garage.

Anti-lock Brake System (ABS) warning light

The anti-lock braking system (ABS) is a critical safety element that comes into play when you need to come to a sudden stop or when driving in adverse circumstances such as ice roads. The ABS light will illuminate momentarily to indicate that the system is in operation, but if it remains illuminated for an extended period of time, it may signal a problem. If the ABS light turns on on its own, you should still be able to brake normally and safely, so you may continue your journey – but keep your distance, drive cautiously, and get it examined as soon as you can.

Even if you are not a member of the RAC, you may phone their roadside assistance line on 0330 159 1111 for assistance.

Brake Pad warning light

In the event that this light illuminates, it indicates that a sensor has determined that your brake pads are too thin. This warning light should illuminate before the brake pads become dangerously thin, giving you ample time to get them replaced. However, you should change your brake pads as soon as you can because if they are fully worn out, it might be highly dangerous for you and your passengers. For additional details, please see our brake pad buying guide. Find a parking space in a garage.

Service Engine Soon warning light

When the check engine light illuminates, it’s usually accompanied by other tell-tale indicators that the engine isn’t running correctly, such as a lack of power or stuttering when you press down on the accelerator pedal. This light might signal a variety of difficulties, ranging from simple issues such as a faulty electrical sensor to considerably more serious mechanical issues such as a problem with your emission control system or catalytic converter, among other things.

How long can you drive with check engine light on?

If your vehicle’s check engine light illuminates, you should have it inspected as soon as possible. The fact that you are still driving increases the danger of causing more, and perhaps irreversible, harm to your engine. Make use of our search engine to locate the RAC-approved garage closest to you. Find a parking space in a garage.

Engine Coolant warning light

Coolant fluid absorbs the heat generated by your engine and dissipates it through the radiator, preventing your engine from overheating and breaking down. This yellow warning light will illuminate when your coolant levels are low, serving as a reminder to you to fill them off. It is best not to make any lengthy drives without adequate coolant; instead, you should stop and top up as soon as possible, otherwise you run the risk of inflicting major harm to your vehicle. Wait until the engine has cooled down before adding more fuel.

Find a parking space in a garage.

Engine Coolant Temperature warning light

When the engine overheats, this light will illuminate to alert you. This might indicate that coolant levels are low, possibly as a result of a leak in the system, or it could indicate the presence of a more serious problem, such as a failed head gasket. If this sign is illuminated in red, you should come to a complete stop immediately because, if your engine does not have enough coolant, it might become so hot that it effectively welds itself together, inflicting irreversible damage. Before proceeding, wait until the engine has completely cooled before checking the gauge on the side of the coolant tank beneath the hood and filling it off as necessary.

In addition to checking for leaks, you should also check for signs of wear on the engine.

In the event that you can’t see any and the light goes off after topping up, you should be able to continue your travel without incident. If the light comes back on after you have topped it up, you should get it looked out to see what is causing it to flash. Find a parking space in a garage.

Engine Oil warning light

It illuminates when the oil temperature rises above a certain threshold, or when the oil volume or pressure falls below a certain threshold, respectively. Because engine damage may be costly or even irreversible if the oil does not lubricate the engine properly, it is critical to respond swiftly if the oil is not lubricating the engine properly. When this light illuminates, you should come to a complete stop and turn off the engine as quickly as feasible. Look under the car for any visible oil leaks, and then check the oil levels, adding more oil if necessary, before continuing.

In this instance, seek for assistance since continuing to drive might cause harm to the engine.

Find a parking space in a garage.

Battery Charging System warning light

While driving, if you notice this indicator on, it means that your battery is not charging properly. An electrical system problem in your automobile might be the origin of this problem, which could be caused by a number of things, including a malfunctioning alternator or battery, a poor electrical connection, or damaged cabling. It will continue to operate normally until the battery is completely depleted; however, once the battery is completely depleted, nothing in your vehicle will function.

Find a parking space in a garage.

Airbag warning light

When this light turns red, it indicates that at least one component of the airbag safety system is not functioning properly. This could be the airbag system itself, the front passenger occupant classification system (which detects the weight and position of the front passenger in order to safely deploy the airbag), or the seat belt pretensioner system, which tightens the belt in the event of a collision. If the airbag system is not functioning correctly, it may fail to deploy in the event of a collision – or, in certain situations, it may deploy suddenly, resulting in an accident.

Find a parking space in a garage.

Stability Control warning light

A flashing red light indicates that at least one component of the airbag safety system is not functioning properly: either the airbag system itself, the front passenger occupant classification system (which detects the weight and position of the front passenger in order to safely deploy the airbag), or the seat belt pretensioner system, which tightens the belt in the event of a collision. As a result of a malfunctioning airbag system, the airbags may not deploy in an accident — and in rare situations, they may even deploy suddenly and cause the vehicle to roll over.

Seek out a parking space.

Powertrain warning light

When this warning light illuminates, it often signifies that there is a problem with your vehicle’s automatic gearbox. A warning light may illuminate if the transmission fluid temperature is greater than normal – or it may illuminate to act as a reminder that your transmission fluid levels are running low and that you should top them off. When this light illuminates, your Ford may automatically enter a’safe’ mode in order to assist avoid additional damage. In this scenario, you may notice a decrease in the vehicle’s performance, which will be noticeable.

However, it is advisable to get any problems checked out by a professional because continuing to drive might result in more serious damage, and automatic gearboxes can be expensive to repair if they fail. Find a parking space in a garage.

Tyre Pressure warning light

Many Ford vehicles are now equipped with tyre pressure monitoring systems, which alert the driver if the pressure in the tires drops. Reduce your speed and avoid stopping suddenly or making any forceful steering maneuvers if your tyre pressure is low.Most gas stations and garages will have an air compressor you can use to check your tyre pressure.If your tyre pressure is low, you should visit a mechanic immediately. Check your owner’s handbook for the recommended amount of air to fill your tires according to the manufacturer’s specifications.If you have a puncture, watch our video to discover how to change a tyre in 10 simple steps.Find a garage near you.

Power Steering warning light

There is an issue with the power steering, as indicated by the presence of this warning light. If the power steering system fails, you will notice that the automobile is more difficult to maneuver and that you should exercise particular caution since driving at high highway speeds without power steering assistance might be dangerous. If your vehicle is equipped with a hydraulic power steering system, a fault is frequently caused by insufficient power steering fluid. You should try to top up your steering fluid levels as soon as you can, if you know how.

Rebooting a computer may be all that is required to resolve this issue with electric-powered systems, for example.

If the light continues to illuminate, you should get your vehicle inspected as soon as possible.

Engine Air Filter warning light

The air filter in your engine prevents dust and other particles from entering into the engine’s combustion chamber. If this warning light illuminates, it indicates that the air filter has gotten clogged and is restricting the amount of air that can be drawn into the engine. While it is safe to continue driving with this warning sign illuminated, the restricted airflow will have an adverse effect on the fuel efficiency and performance of your vehicle. Replacing the filter is a simple procedure that may be completed by your local mechanic, or you can perform the replacement yourself.

Find a parking space in a garage.

Water in Fuel warning light

Diesel fuel filters remove any traces of water that may be present in diesel fuel before it enters the engine, where it might cause serious harm. When this yellow light illuminates, it indicates that the diesel fuel filter is nearly full and must be emptied. Manually emptying the filter is required on some cars, although automated filter emptying is possible on others. Check your owner’s handbook to discover how it works on your specific Ford model before using it. If the filter is supposed to empty automatically, this warning light may indicate that something is wrong with the system, in which case you should get it looked out as soon as possible.

Despite the fact that it is safe to continue driving with this warning light on, you should empty the gasoline filter as soon as possible because if water begins to leak into your engine, it might result in catastrophic damage. Find a parking space in a garage.

Glow Plug warning light

This light will generally illuminate when your Ford diesel engine is getting ready to operate. Be sure to wait until the light has gone out before starting your vehicle. If this light is flashing, it means that something is wrong with it and that the glow plugs may need to be replaced. As soon as possible, have it looked out. Glow plug failure may cause the engine to enter safe mode in order to avoid any damage to the engine. As a result of this, you may notice a substantial loss in performance until the problem has been resolved.

Fuel Cap warning light

The fuel system must be entirely isolated from the outside environment in order to function effectively. This light will illuminate to alert you if the gasoline cap is not correctly secured, indicating that there is effectively a leak in the fuel delivery system. Pull over as soon as it is safe to do so and double-check that the gasoline cap is completely closed before continuing. Once you’ve kept driving, it may take some time for the light to turn off completely. The gasoline cap should be inspected for any damage if the light does not turn off after a day or two.

If everything appears to be in order, and the system is unquestionably safe, it is possible that there is a leak elsewhere in the system that is fooling the computer.

Find a parking space in a garage.

Auto Start/Stop warning light

Modern Fords include an Auto Start/Stop technology that automatically shuts down the engine for a short period of time while the vehicle is stationary in order to save fuel consumption and pollution. A malfunction in the system, as indicated by this warning light, might be caused by a number of different factors. You should be able to continue driving, but you should take your vehicle to a dealership so that they can examine the error code and determine the source of the problem. Find a parking space in a garage.

See also:  What's is the correct tire pressure for larger tires?

Forward Alert warning light

Forward Alert is a safety function available on newer Ford vehicles that employs a sensor to scan the road ahead, assessing the distance and relative speed of the vehicles in front of you, in order to notify you if you go too near to the vehicle in front of you. If it determines that you are in risk of colliding with another vehicle, it prepares your brakes for emergency braking by applying additional force to your brakes. If an accident is near, the system will automatically apply the brakes and retract the seatbelts to brace you.

Lane Keeping Aid warning light

In many new Ford vehicles, a camera sensor on the front windshield detects white and yellow lines on the road and alerts the driver. In the event that you are traveling faster than 43mph and the sensor detects that the vehicle is straying from the lane, even if the turn signals are not on, this warning light will illuminate and the steering wheel will shake.

The technology will intervene automatically if you are too sluggish to respond and will direct you back into your lane. Find a parking space in a garage.

Blind Spot Monitor warning light

Ford’s Blind Spot Information System (BLIS®) utilizes radar to scan the blind spots on each side of your car and then shows an orange light in the matching side mirror if it identifies a vehicle you can’t see. If this warning light illuminates, it signifies that the system is not functioning properly, and it should be accompanied by a message on the display that describes the nature of the malfunction. Sometimes this is due to dirt or debris covering the sensor, but it may also be due to severe rain or snowfall interfering with the radar signal as described above.

Find a parking space in a garage.

Ford Focus Check Engine Light

Please wait for the page to load completely.

How much does it cost to get the engine light checked?

The check engine light can indicate a variety of problems ranging from a loose gas cap to a more serious failure such as a faulty catalytic converter or a problem with one of the car’s oxygen sensors, so getting a definitive code reading and diagnosis is essential. The average cost of a check engine light diagnostic and testing is typically between $88 and $111, depending on the provider. The good news is that Coggin Ford Jacksonville provides comprehensive multi-point inspections as well as free diagnostics in the majority of situations to assist you in determining the source of your check engine light.

Ford Focus Check Engine Light

A flashing light indicates that the situation is severe, and that if it is not addressed immediately, it might result in significant damage to the vehicle. If the check engine light on your Ford Focus comes on, it signals that there is a problem that has to be addressed immediately, and your Ford should be taken in right once. An engine misfire that causes unburned gasoline to be spilled into the exhaust system is generally the cause of this blinking light being activated. There, it can quickly raise the temperature of the catalytic converter to a point where damage is inevitable, necessitating the need for a costly replacement converter.

This is a strong possibility as a contributing factor.

It is possible that if the problem is not addressed or if you continue driving, it can spread to the spark plug wires, catalytic converter, or ignition coils, resulting in a very expensive repair.

Will the check engine light reset itself?

When the problem or code that caused the check engine light to illuminate is resolved, the check engine light on your Ford Focus will normally turn off by itself. For example, if a loose gas cap was the reason of your check engine light going on, once the cap is tightened, the light will turn off by itself within a few minutes. Similarly, if your catalytic converter is failing and you’ve been doing a lot of stop-and-go driving, the check engine light may have come on as a result of the large amount of time the converter has been put through its paces.

If you drive more than that amount and the light remains on, you will need to bring the vehicle into Coggin Ford Jacksonville so that the light and code can be verified and the vehicle may be restarted.

Ford Focus Check Engine Light Codes

When the check engine light shines on your vehicle’s dashboard, it may be rather frightening to see that small light suddenly illuminate, but in truth, it is not anything that should drive you to shut down in panic right immediately. If you hear the phrase diagnostic trouble codes (DTC), this is simply another name for the codes that appear on your dashboard when your engine is running. This list contains automotive computer codes that have been saved by the ECM, commonly known as the OBD (on-board computer diagnostic system) in your Ford Focus.

The fact is that, while it may seem intimidating at first, learning how to do simple diagnostics can provide you with valuable information about your car as well as allow the Check Engine Light to do what it was intended to do: serve as a guide.

Because there are hundreds of different OBD codes, there are also hundreds of conceivable causes for the indicator to be illuminated, including the following:

  • Issues with emissions controls
  • Problems with the computer output circuit
  • Gas cap that is either loose or missing
  • O2 sensor
  • Bad spark plugs
  • An old battery
  • And other issues. Faults with the ignition system
  • Problems with the fuel and air metering systems
  • Problems with transmission

This is why it is critical for someone who does not have a great deal of automotive expertise to refrain from making assumptions about what a code indicates. When your vehicle’s check engine light illuminates, you should have it checked out by a skilled Ford repair as soon as possible. If the engine light turns on as a result of a serious problem, you run the danger of further harming your vehicle if you do not address the problem immediately. For more information, call Coggin Ford Jacksonville at 9047478996 or book your check engine light service online now!

Ford Focus Check Engine Light Flashing

We know from years of offering Check Engine Light Diagnosis Service that there are several typical explanations for an illuminated Check Engine Light, including something as simple as a loose gas cap, despite the fact that there are several probable causes. Other typical causes of a Check Engine Light include a filthy mass airflow sensor, a failure with the fuel injection system, a malfunctioning emissions control part, a bad head gasket, a damaged oxygen sensor, or a set of defective spark plugs, to mention just a few examples.

When this occurs, the Check Engine Light is turned off, and you may walk out of the repair shop certain that your Ford problem has been resolved.

In order for the sensors to continuously monitor situations, they must also communicate data to the electronic control unit.

However, this is the limitation of the Check Engine Light – it will not tell you what is wrong with your vehicle or what you need do to fix it.

The solution lies with us; Coggin Ford Jacksonville offers a Check Engine Light Diagnosis Service that pinpoints the source of the problem and provides you with a recommendation on what to do next from a Highly Qualified Service specialist. Contact us now to learn more.

How many miles can you drive with the check engine light?

If your check engine light is illuminated, we urge that you pull over and contact Coggin Ford Jacksonville for assistance in determining if your vehicle is safe to drive in or whether a tow truck is necessary for your safety. Attempting to comprehend the code and then planning your tactics accordingly is the best course of action. It might be anything from a faulty sensor to faulty plug wires that require replacement. Because each check engine code has a different level of severity, it is necessary to forecast how many miles you will be able to drive with the check engine light illuminated.

What could cause the check engine light to come on in a Ford Focus?

Your gas cap might be loose or need to be replaced if your check engine light turns on. If this is the case, tightening or replacing your gas cap could solve the problem. On the other hand, your vehicle’s check engine light might also be an indication of a significant malfunction that could cause serious damage to your engine and result in a large repair expense. The check engine light will either glow or blink depending on your vehicle’s make and model. A constant glow normally signals something less serious, however a flashing check engine light indicates that your vehicle’s engine is in significant condition and that quick assistance is required to fix the problem.

The following is a list of the most typical reasons why your check engine light may illuminate:

  • Your gas cap might be loose or need to be replaced if your check engine light turns on. If this is the case, tightening or replacing your gas cap could resolve the problem. Furthermore, the check engine light might be a warning sign of a major problem that could cause catastrophic damage to your engine and result in a significant repair price. The check engine light will either glow or blink depending on the make and model of your vehicle. Typically, a continuous glow suggests something less serious, but a flashing check engine light signals that your vehicle’s engine is experiencing major problems and that emergency assistance is required. Our recommendation is that you not drive your Ford Focus if the check engine light is on and instead arrange Ford servicing as soon as possible. Listed below is a list of the most typical causes of your check engine light to illuminate:

What Does the Check Engine Light Mean?

The check engine light on your Ford Focus is one of the most frequently misinterpreted lights or indications on the vehicle. The check engine light is a feature of the onboard diagnostics system, and it can be shown in a variety of ways depending on the vehicle. An engine symbol, a message such as “Check Engine,” or a mix of the two are all possible with a check engine sign. Depending on the color of the light, it will either be amber or red. It is a component of the diagnostics system present in your car.

Some of these tasks include adjusting the ignition timing of an automatic gearbox, managing the engine speed, and applying stability control, to mention a few examples.

It might be anything as easy as your gas cap being loose, or something as catastrophic as your engine knocking out of whack.

Whether you’re trying to figure out what code is causing your check engine light to illuminate or why your check engine light is flashing, our Fordservice department can assist.

Is it safe to drive your Ford Focus with the check engine light on?

The check engine light on your Ford Focus is one of the most frequently misinterpreted lights or indications on a vehicle. There are several distinct ways that the check engine light might appear as part of the onboard diagnostics system. An engine symbol, a message such as “Check Engine,” or a mix of the two are all possible on a check engine light. In either an amber or a red light, this light indicates that your car is equipped with an onboard diagnostics system. Increasingly since the 1980s, onboard computers have regulated and monitored vehicle performance, and your Ford Focus’s computer can handle a range of tasks.

Having said that, the check engine light might indicate a range of other problems with your vehicle.

Coggin Ford Jacksonville can help you if your Ford Focus’s check engine light comes on.

Whether you’re trying to figure out what code is causing your check engine light to illuminate or why your check engine light is flashing, our Fordservice department can assist you. Today is the day to contact Coggin Ford Jacksonville!

Check Engine Light Service Ford Focus

What do you do when you’re traveling in your Ford Focus and a yellow light appears on your dashboard, indicating that the engine needs to be checked? Your heart falls a little, if you’re like the majority of Ford owners, since you have no idea what that light is trying to tell you or how you should respond. Stress can be exacerbated by apprehension about the unknown (or the potential expense of the unknown). But take a deep breath and understand that just because the light is on doesn’t mean you have to pull over to the side of the road and call a tow truck, it is highly advised that you have your Ford Focus examined as soon as you can.

When the ECM (electronic control module), which is the vehicle’s onboard computer, detects a fault in the electronic control system that it is unable to rectify, the check engine light illuminates on your Ford Focus.

This code is scanned by our Ford vehicle repair experts at Coggin Ford Jacksonville using an electronic scan instrument, which they use to diagnose the problem.

While this code will inform you of the problem that has been found, a true diagnostic will still need the services of a qualified expert to establish the problem and correct it.

Leave a Comment

Your email address will not be published. Required fields are marked *