My AC stops cooling and the heat comes on?

If your air conditioner is running, but not lowering temperatures inside, one issue could be a blocked or clogged condenser coil. When operating correctly, the condenser fan draws air into the outdoor unit through the condenser coil to pull heat energy out of your home.

  • If your air conditioning system just isn’t turning on then we suggest you run through a few things before calling in an HVAC expert: Make sure the outdoor breaker fuse is positioned correctly Check your electrical panel for a tripped breaker Confirm that your thermostat is switched on

Why is my AC turning on the heater even on cooling mode?

What is causing your heater to activate? Electrical issues within your central AC unit are the most likely causes of your heater turning on when it shouldn’t. Shorted wiring, faulty electronics in your furnace, or an electrical problem with your thermostat, for instance, could all explain the issue.

Why is my AC suddenly not cooling?

Perhaps the most common cause of AC issues is clogged filters. Dirt, pet hair, pollen and dust can clog your filters. When filters get clogged, they begin to restrict the flow of air through your AC. The result is that the AC doesn’t cool your indoor air effectively.

Why does my thermostat switch from cool to heat?

A common issue that occurs with this is short cycling, which is when the temperature gap is too small and the system is constantly being turned on and off, causing wear and tear. Depending on your differential settings, you might need an HVAC technician to set this up.

Why does my heater keep turning on?

When a furnace keeps turning on and off, it is usually due to short cycling. This is the term used to describe problems originating from within the heating system. If short cycling is not promptly diagnosed and corrected, it could cause permanent damage to your heating unit and higher utility bills.

Should I turn off AC if it’s not cooling?

If your ac is still not cooling there is one more thing you need to do. This is very important. TURN IT OFF and call your HVAC service provider to assist you. We always tell our customers to turn off an ac that is not cooling properly.

How do I reset my air conditioner?

How to Reset an Air Conditioner

  1. Power down your AC. Start at your circuit breaker panel and flip the breaker that powers your AC.
  2. Find the button. Most air conditioning units are equipped with a reset button.
  3. Hold down the reset button for 3 to 5 seconds and then release.
  4. Restore power to your AC.

How do I reset my thermostat?

Reset the Thermostat The method to reset your thermostat will vary depending on the model. Common methods for resetting a thermostat include installing the battery backward for five seconds, pushing a recessed reset button with a pin or paper clip, or shutting off the breaker to the thermostat for 30 seconds.

At what temperature should you switch to heat?

That said, experts recommend turning on the heat when the indoor temperature is below 64 degrees Fahrenheit. If you have children, seniors, or people who are sick that threshold might need to be a bit higher. Set the thermostat lower when you go to bed.

Why Does My Honeywell thermostat go from heat to off no cool?

If the thermostat’s batteries are low, it will not be able to begin heating or cooling. To do this, power down the system, detach the thermostat, unscrew it and check the C-wire for any damage. If you’ve installed your Honeywell Thermostat without a C-wire, replace your batteries.

How do you know a thermostat is bad?

7 Signs You Need to Replace Your Thermostat

  1. Your HVAC Keeps Turning On or Off.
  2. Faulty Thermostat Readings.
  3. Suspiciously High Energy Bills.
  4. Constant Temperature Shifts.
  5. Thermostat Is Too Old.
  6. Thermostat Fails to Respond to Changed Settings.
  7. Your HVAC System Short Cycles.

Why does my heat turn off at night?

Short-cycling: If you’re noticing that the furnace shuts off regularly at night, it may be short-cycling. This happens when the furnace is too large for your home. If the system does not have proper airflow due to a clogged or dirty air filter, the heat exchange may overheat, which would cause the furnace to shut down.

How do I know if my AC is short cycling?

Air conditioner short cycling in minutes: If your air conditioner turns off and back on at intervals of less than five minutes it is short cycling and needs repair. If your air conditioner turns on and off at intervals of less than ten minutes it is probably short cycling and also deserves a service call.

What To Do When Your AC Stops Working in the Scorching Heat

All of us fear the day when our air conditioning fails during the sweltering summer months. Despite the fact that such issues may be avoided with regular maintenance, unanticipated difficulties can nevertheless emerge despite your efforts. So, when your air conditioner stops working, take our advice! This article will teach you how to troubleshoot your air conditioner in the event that it fails on you. We want to make sure your air conditioning does not fail on you. So continue reading if you require a temporary solution till expert assistance comes.

Check the Condenser

When your air conditioner stops working, one of the first things you should do is inspect the device. Check to see that the condenser is operating and that the unit is properly connected. Make that the thermostat in the house is working properly as well, and that it is set to the appropriate temperature. There are a variety of different reasons why your computer may stop operating, but this is always one of the first things to look into.

Lower the Temperature on the Thermostat

Sometimes the most obvious solutions are the most effective. Turning down the thermostat by five to ten degrees is one method of putting your air conditioning through its paces even more. Some thermostats can be quite difficult to program and are prone to having their metaphorical wires crossed. To see if your air conditioner comes on again after you lower the thermostat, try lowering it down a few degrees. It is recommended that you completely study the handbook for your thermostat in order to prevent having difficulties with it and your air conditioning system.

A malfunctioning thermostat might be one of the most common reasons your heating system stops operating, and it’s not difficult to repair or replace.

Check the Fuse Box

One of the most common causes of power outages is the failure of a fuse or a tripped circuit breaker. The fuse box should be one of the first things to examine if your air conditioning system stops working. However, if you have followed all of the measures we have just discussed and your air conditioner still does not come on, it is possible that there is a significant problem with the motor or compressor of your unit. If this occurs, it is critical that you contact a medical expert.

What If the Air Conditioning Turns On, But Is Not Cooling The Air?

When your air conditioning unit comes on, but does not cool the air, it is possible that there is another problem with the machine as well. Naturally, this entails taking a variety of procedures to resolve issues with the air conditioning system itself. The first thing to do is to go outside and look at the unit. Check to see that the unit is not obstructed by anything, such as leaves or debris, before proceeding. If this is the case, clear the obstruction and re-test the air conditioner to ensure it is working properly.

If there is nothing in the way of your air conditioner unit outdoors, it is possible that you have an issue with your filter; this is why it is so vital to get your air conditioner serviced on a regular basis.

As a result, it is possible that the coil will freeze.

Remove the air conditioner’s filter and inspect it for pet hair and grime to ensure that it is in proper working order. Replace the filter and then retest the air conditioner to ensure it is working properly.

What If My Air Conditioner Cannot Cool the Air in My Home Properly?

When your air conditioner is operational but fails to adequately chill your home, it is possible that you are using an air conditioning unit that is insufficiently sized for your home’s requirements. Ideally, a decent air conditioning unit should be capable of producing a temperature differential of twenty to twenty-five degrees Celsius when compared to the outdoor temperature. If your unit is too tiny, it will not be able to make up for the difference in power use. As a result, you should always consult with a professional before having a unit installed.

The charge and the evaporator coil are two of the most often encountered issues.

If you notice this on your air conditioning unit, it is critical that you turn your unit off immediately and contact a professional for assistance.

Call a Professional for a Maintenance Check

Even if you are able to resolve the issue with your air conditioning, it is necessary to schedule a maintenance check in order to avoid future issues. It is possible that the problem has been resolved now, but future difficulties can be avoided by performing routine maintenance on your air conditioning system. If you want maintenance or repair services, please do not hesitate to get in touch with us.

Why is My AC Not Cooling? (Air Conditioner Troubleshooting Tips!)

When you have to question, “why is my air conditioner not cooling?” during the hottest days of summer, it’s a difficult experience. Here, we’ll go through some frequent problems, how to fix them yourself, and when it’s best to consult a professional. There are a variety of reasons why a central air system fails to provide adequate cooling, so we’ll start with preventative measures you may take before calling for AC repair from a professional HVAC expert.

AC DIY TROUBLESHOOTING TIPS

  1. Check the temperature setting on the thermostat. Clear the trash from the exterior of the air conditioning compressor
  2. Check the air filter for clogging. Check that all of the vents and returns on the interior are unobstructed and operable. Determine whether or not the circuit breaker was activated.

IF AC BLOWS WARM AIR OR WON’T TURN ON; CHECK THE THERMOSTAT

Occasionally, an air conditioner will activate and blast warm or lukewarm air, rather than cooling the room. What is causing the AC not to cool? It’s possible that the thermostat was fitted incorrectly or was set to the incorrect temperature.

AC Troubleshooting Fix

Check to see that the thermostat is set to “COOL.” Every now and again, the lever or button gets accidently hit by someone, or even by a very energetic duster! It is also simple to reset the thermostat after a temperature swing, which is especially useful during the spring and fall when our weather yo-yos. Also, make sure the fan is turned on. If the fan is set to “ON” rather than “AUTO,” it will operate continuously throughout the day. To put it another way, the fan continues to operate even when the air conditioner is not chilling.

Rooms with inside doors and windows, or even in a corridor, should have thermostats installed. Make sure there’s nothing in the immediate vicinity that may emit more heat or even cooling, causing its temperature sensors to get confused.

Conclusion:Set thermostat on “COOL,” and the fan to “AUTO.”

When your air conditioner cools your home, the hot air is pumped out of your house by the AC compressor unit located outside of your home. The compressor runs all year long if you use a heat pump, which operates similarly to an air conditioner in the summer but in the winter operates in the opposite direction of the air conditioner. That is, the heat pump takes warm air from the exterior into the air handler, where it is then dispersed throughout the house through the ductwork. So, how is that even conceivable in colder climates?

Because heat pumps require auxiliary heat sources such as electric heat strips at high temperatures, they are often used in conjunction with other heating systems.

Heat pumps, on the other hand, make use of the AC compressor unit throughout the year.

AC Troubleshooting Fix

Circumambulate around the outside air conditioning compressor unit. Remove any dirt, trash, fallen leaves, or other detritus that has accumulated around the area. The compressor of the air conditioner becomes clogged with too much plant or dirt. Ensure that it is clean since it needs to “breathe.”

  • The power switch is normally housed in a metal box beside the air conditioning compressor unit, so look for it there. To turn it off, press the button. Pollen, debris, and anything else that is clogging up the AC compressor fins and the base should be carefully sprayed away with a hose. It is not necessary to use a power washer. That is an excessive amount of force
  • Remove any flowers, plants, or bushes from the area around the AC compressor so that it has a two- to three-foot buffer zone. After storms, make it a practice to stroll around the AC unit to clear away any fallen leaves or twigs that have accumulated. When twigs fall into the air conditioning unit and cause issues with the fan blades, it’s easy to think that the device is malfunctioning. If any neighboring branches are leafy, thick, or appear to be dying, prune them back to their original shape. All it takes is a decent storm for a large branch to fall and do serious damage to your air conditioning compressor. When you’re finished, turn off the machine and let it dry as much as possible before turning it back on.

Conclusion:Clear away yard clutter and clean the outdoor unit.

Your interior components, like your air conditioner’s compressor, rely on proper ventilation to function properly. A blocked filter makes it difficult for air to flow freely through it. In order to drive air past the clogged filter, the HVAC system has to work hard. Consequently, your equipment suffers from excessive wear and tear as well as contamination circulation, which may lead to a variety of problems such as freezing of evaporator coils.

AC Troubleshooting Fix

Once a month, it is recommended that you check the filter in your heating and air conditioning system. Make a note of the date on which your gas or electric payment is due. The majority of households find that changing their filters every two to three months is sufficient. If you have smokers, pets, or members of your family who are susceptible to high pollen counts and other asthma and allergy triggers, you should change your bedding more frequently.

Conclusion:Check your air filter and change it as needed.

It is usual for furniture, draperies, or temporary things such as toys to obstruct the air vents of a home or building. A second consequence of airflow blockages is that your HVAC system must work harder, increasing the risk of an AC repair. Blower motor problems, frozen evaporator coils, and water seeping from your air conditioner are all prevalent as a result of insufficient airflow in your air conditioner. Return vents, which are often bigger squares or rectangles, suck air into the ducts from the outside.

They can be found high on the wall or low on the wall, depending on the situation. Supply vents are the smaller rectangle vents that can be found on the floor or high on the ceiling, depending on the location.

AC Troubleshooting Fix

Taking a walk around the home and inspecting all of the return and supply vents is recommended. Remove anything that is obstructing airflow and check that the vents are open. Some homeowners believe that sealing vents in rooms that are rarely used would save them money. It actually causes the air pressure in the residence to fluctuate, resulting in extra difficulties.

Conclusion:Keep air vents unblocked and open.

Did you know that the majority of power surges originate from within your own home’s walls? Sure, lightning strikes and external power grid problems can occasionally bring electricity into your house, but the vast majority of the time, it is your own appliances that are the source of the problem. When large equipment, such as air conditioners, are turned on, they cause a surge of electricity to flow through the system. If your air conditioner shuts down unexpectedly, it might be due to an electrical issue.

AC Troubleshooting Fix

To check for circuit breakers that are in the OFF position, locate the main electrical panel for your home and look for them. If you’re fortunate enough to have circuit breakers that are clearly labeled, check for the letters “AC” or “Air Conditioner.” If the breaker has been tripped, turn the breaker back to the “ON” position and watch what occurs.

See also:  Blower doesn't work Equinox?

Conclusion:It’s possible a one-time event tripped the circuit breaker. If, however, the breaker immediately trips again when you try to run the AC, turn off the air conditioner and call a professional. It’s likely you have an electrical issue.

After attempting the DIY air conditioning troubleshooting techniques and failing, it is recommended that you seek expert assistance. The following are some of the most common air conditioner issues that might cause your AC to stop cooling your home:

  • Problems with the refrigerant. It might be caused by a leak or a low battery charge. Whatever the case, refrigerant is a highly dangerous substance, and you should avoid tampering with it. Contact a heating and air conditioning technician. There are problems with the fan motor. If your fan motor is malfunctioning or experiencing electrical problems, it will still be able to circulate cold air around your home. Contact a heating and air conditioning technician. Capacitor failure. If your capacitor is faulty, your air conditioner will not be able to provide the necessary electricity. You require the services of an HVAC specialist to replace your worn-out air conditioning compressor. The compressor is a critical component that is frequently covered by a separate warranty. In order to determine whether it can be preserved, contact an HVAC professional. If this is the case, you may need to consider replacing your air conditioner. Take into consideration the cost of repair in comparison to the cost of a new air conditioner installation. Consider that with a new air conditioner, you’ll get a new warranty, and if it’s more energy-efficient, you’ll see a reduction in your air conditioning expenditures right away

AC STILL NOT COOLING? CALL A-1 MECHANICAL

If these central air conditioning troubleshooting techniques haven’t resolved the issue, contact our staff in Lansing or Grand Rapids for more assistance. When your air conditioner isn’t chilling properly, we’re here to assist you right away. Among the heating and cooling services we provide to our customers are air conditioner installation, air conditioner servicing, and air conditioner repair. Call A-1 Mechanical at 517-348-0302 for a free quote on new HVAC equipment or to schedule an appointment for AC repair or servicing.

Why is My AC Not Cooling House? 13 Common Reasons

Air conditioners are installed in the homes of around 87 percent of the population of the United States. People spend a lot of money on their energy-efficient home air conditioning systems because of this reason. Is your air conditioner, on the other hand, no longer able to chill your home? You shouldn’t be concerned because this might really be a simple remedy. Continue reading to find out more about the most frequent HVAC problems, as well as how to resolve them. Alternatively, you may skip directly to the part you’re interested in learning more about.

13 Reasons Why the Air Conditioner Not Cooling House

Is your air conditioner not cooling? Nobody wants to cope with anything like that during a summer heat wave. Likewise, if your air conditioner isn’t cooling adequately, or if your air conditioner is running but not cooling, there are several typical issues that you may be able to identify on your own.

1. Dirty Air Filter

It doesn’t matter what sort of air conditioner system you have; if your filter is blocked, the airflow will be restricted regardless of the system. When this occurs, the efficiency of your air conditioner is diminished, and there is a lower likelihood that the system will effectively chill your house. If you haven’t cleaned the filter in your portable or window air conditioner yet, do it now and create a habit of checking it on a regular basis. You should check your central air conditioning filters at least once a month, more frequently if your system is being used frequently or if you have pets in your home.

Hot air coming from your air conditioner may also be an indication of a filthy air filter, which can impede air movement and reduce efficiency.

2. Incorrect Thermostat Setting

Alternatively, if your central air conditioner is producing hot air when it should be generating delightful cool air, it is possible that you have accidentally turned the thermostat to “heat” rather than “cool.” Another issue that you can have with your thermostat is the temperature reading displayed by the thermostat. If the temperature of your air conditioning thermostat appears to be off, you should check to be that it is not being exposed to any direct sunlight at the time. Cold air may be more resistant to being blown by direct sunshine.

3. Low Refrigerant

You may be running out of refrigerant if your air conditioner is operating but not decreasing the temperature. Before adding any extra refrigerant, you’ll want to make sure there are no leaks in the system. Most of the time, leaks will continue to occur, and they can be hazardous to the environment.

4. Refrigerant Leak

A leaky air conditioner signals trouble for anybody who enjoys living in a cool, pleasant environment. The refrigerant pressure should be checked if your home isn’t cooling properly. If the refrigerant has escaped, it is possible that the low-pressure safety switch has been activated. It is critical to contact a professional as soon as possible if you discover a leak becauseHVAC refrigerants may cause serious health concerns. The presence of puddles or wetness may indicate that the refrigerant is not leaking or low, but that condensation has formed during the air conditioning operation and has been drained.

If this occurs, attempt to clean your condensation drain pipe and to de-alginate your system with bleach if necessary.

5. Clogged A/C Unit

In order for your central air conditioning system to function correctly, the exterior compressor must have adequate airflow. Maintain at least two to three feet of spacing between your compressor and any nearby structures or plants to avoid damage. Additionally, there should be around five feet of space between the top of your outdoor air conditioning unit and any trees above it. If you notice that your air conditioner turns on and off repeatedly, this indicates that there is a signaling problem.

You’ll want to look for any blockages and give your device a thorough cleaning to get rid of any remaining material.

6. Warm Window

If you have a window air conditioner and it receives direct sunlight during the hottest part of the day, cleaning your home will be far more difficult. If at all possible, attempt to relocate your air conditioning unit to a less sunny location. If you are unable to relocate your air conditioning unit, you should keep your drapes and shades drawn throughout the day in order to block the sunshine and prevent your home from being overheated. If you have central air conditioning, the same holds true.

If you have a window air conditioner, be careful to check the seals surrounding the unit to ensure that hot air from the outside is not leaking in and cold air is not leaking out. It is possible that you will need to reseal your unit with weather stripping.

7. Leaky Ducts

Pests, incorrect installation, and other accidents can cause duct damage, which might result in air escaping from your air conditioning system. Because ductwork distributes conditioned air throughout your house, faulty ductwork affects the overall effectiveness of the heating and cooling system. Additionally, an inefficient air conditioning system might result in increased electricity expenditures. Another indicator of a problem with your ducts is the presence of noise. In the event that you hear a popping or pinging sound, it might be caused by a loose flap of metal in the ducting.

Especially if your outside unit is a heat pump, it is susceptible to harm from trash and pests.

Cooling your home with your air conditioner can be ineffective if your heat pump is malfunctioning.

8. Damaged Heat Pump

Especially if your outside unit is a heat pump, it is susceptible to harm from trash and pests. Alternatively, it might simply deteriorate with time, becoming susceptible to concerns such as frozen coils, leaks, blockages, compressor failures, and other issues. Cooling your home with your air conditioner can be ineffective if your heat pump is malfunctioning.

9. Frozen Coil

Typically, an evaporator coil will be found in a central air conditioning system. If you have a frozen evaporator coil, your air conditioner is working extra to keep your house from becoming too hot. Check for any airflow problems, such as a clogged filter. Also, make sure your blower fan and refrigerant levels are in proper working order. In severe situations of frozen coils, you may even notice ice on the outside of the air conditioning machine.

10. Tripped Circuit Breaker

Whether your air conditioner won’t turn on at all, check your electrical panel to determine if a breaker has been tripped. If so, replace the breaker. If the breaker has just tripped, all that is required is to reset it.

11. Blown Fuse

Another possibility for why your air conditioner isn’t working is that a fuse has blown. You should double-check that your equipment is connected in and that the electrical panel is functioning properly.

12. Broken Fan

If the fan on your outside unit isn’t turning on, your air conditioner isn’t chilling properly. You should try to reset your machine by pressing the reset or overload button many times. Alternatively, if your device is switched off, try spinning the fan blades in a clockwise direction. If the blades are able to freely spin, you may have an issue with your capacitor, and it may be necessary to replace the capacitor.

13. Bad Compressor

If your compressor isn’t operating, it might be because of a faulty start capacitator, a burnt wire, or simply because the compressor is faulty.

It’s necessary to adjust your refrigerant charge, check the capacitor, clean the condenser coil, and replace the compressor if it won’t reset after a few attempts.

When to Call a Pro if Your AC is Running but Not Cooling The House

Having trouble with your air conditioner cooling the temperature? Don’t be concerned; this is one of the most prevalent AC problems. In most cases, the problem is straightforward to identify. However, if you discover the answer to the question “Why is my air conditioner not cooling the house?” or any other cause for worry, contact a professional for assistance right once. Fischer HeatingandAir’s Licensed AC Repair Professionals may be reached at (206) 202-9499 for immediate assistance with air conditioning, heating, and ventilation repairs.

The company is well recognized as one of the best HVAC firms in the greater Seattle area.

Air Conditioning Trouble Shooting Tips & A/C Problems and Solutions

Having trouble with your air conditioner cooling the temperature? Don’t worry; this is a typical problem with air conditioners. It is typically straightforward to determine the source of the problem. However, if you discover the answer to the question “Why is my air conditioner not cooling the house?” or any other cause for worry, contact a professional for assistance right once! Please call Fischer HeatingandAir’s Licensed AC Repair Professionals at (206) 202-9499 to receive prompt air conditioning and heating repair service in the greater Seattle area.

Fischer Heating and Repairs is widely recognized as one of the best HVAC firms in the greater Seattle area.

1. Your AC Is Not Blowing Cool Air

A wonderful, warm wind may be really pleasant—but not when it comes from your air conditioner, which is not the case. If this is the case, try lowering your thermostat by five degrees to see if the air cools down any. The following are some likely culprits if that doesn’t work out for you:

  • The evaporator has a foul odor
  • The air filter has become clogged. The amounts of refrigerant are too low

Hot days can also have an influence on the efficiency of your unit, particularly if you’re attempting to chill your home to 65 degrees while the temperature outside is 100 degrees.

Solution

Make sure to clean your evaporator (or hire a pro to do it). Make sure you change your air filter every month or two, depending on your temperature, if you have dogs in the house, and whether you have allergy sufferers in the house. Before adding refrigerant, get your unit inspected by a professional to ensure that it is not leaking any gas.

2. Your AC’s Air Isn’t Flowing

Evaporator should be cleaned (or hire a pro to do it). If you live in a humid environment or have dogs in the house or are an allergy sufferer, make sure you change your air filter at least once every two months. Make sure your unit is not leaking before adding refrigerant by having a professional inspect it.

  • Circuit breaker has been tripped
  • Blower belt has been worn
  • Refrigerant levels are low.

Solution

Inadequate ventilation might be caused by something as simple as a tripped circuit breaker; thus, check your fuse box first.

Even if the problem isn’t with your fuse box, you should have a professional evaluate your system to determine if there are any internal problems. Depending on what they find, they may be able to determine if you have a worn belt or a refrigerant leak.

3. Your AC Is Constantly Turning On and Off

Check your fuse box first, since anything as simple as a tripped circuit breaker might result in insufficient ventilation. You should have a professional examine your system to see whether or not there are any internal problems. If it is not your fuse box, you should call for assistance. Your technician will determine if you have a deteriorated belt or an unidentified refrigerant leak.

Solution

If the problem is caused by a clogged condenser unit or a filthy air filter, properly cleaning your system will solve the problem. The best course of action, however, is to have a professional come out and examine your home’s cooling requirements to ensure that you have the appropriate air conditioner size for your living area.

4. Your AC Is Constantly Running

However, even during periods of extreme heat, it is critical that your air conditioner be turned off periodically to give your system a rest and prevent it from freezing. An air conditioner that operates continuously may soon degrade the components of the system and rack up a significant amount of money in utility bills.

Solution

The first step is rather straightforward in this situation, and that is to raise the inside temperature on your thermostat and observe whether or not your air conditioner continues to function. If it shuts off, it means your indoor temperature is set too low, which is fantastic. If it continues to run, you should seek professional assistance. It might be caused by a variety of factors, including a malfunctioning thermostat, compressor, or electrical components.

5. Your AC Won’t Turn On

Denira – Adobe Stock (stock.adobe.com) What should you do if your air conditioner won’t turn on? Even though it’s inconvenient, a tripped circuit breaker is frequently the cause of the problem. In rare circumstances, improper wiring may be the source of the problem.

Solution

Check your fuse box to discover whether the circuit was triggered by accident. Unless there appears to be an issue with the wiring after you have checked it out, you should refrain from attempting to troubleshoot it. A professional should always be called when dealing with electrical issues to ensure that you do not receive a terrible shock or wind up catching your home on fire.

6. Your AC is Leaking Liquid

Water and refrigerant are two distinct types of liquids that might leak from your air conditioner. Condensation on the outside of the air conditioner is typical; however, if you notice vividly colored stains around the unit or if water is pouring into your home, this suggests a more serious problem with the machine.

Solution

Water and refrigerant are two different types of liquids that might leak from your air conditioning system. It is common for condensation to form outside of the air conditioner, but if you notice vividly colored stains around the unit or if water is pouring into your home, there is a more serious problem.

7. Your Condenser Coil Is Freezing

When you run your air conditioner nonstop for an extended period of time, the condenser coil may get frozen. If your condenser coil freezes, it may have a significant impact on your power expenditure.

Solution

Check the coils for ice buildup.

Icing should not develop on your device, especially not in extremely hot conditions. The problem might be caused by a clogged air filter, which can be easily fixed by just replacing it, but you should still have a professional inspect your system to ensure that nothing significant is wrong with it.

8. Your AC Smells Funky

There should be no odor coming from your air conditioning equipment. If this occurs, it is probable that something has gone wrong. Electrical and musty odors emanate from faulty air conditioners, causing them to become unpleasantly warm.

See also:  08-10 Audi Tire pressure sensor reset A4 RS S4?

Solution

If you detect an electrical odor, switch off your system and contact a professional immediately. You may replace your air filter if you notice a musty or mildewy odor, but the best method to avoid this is to have your home professionally inspected and cleaned on a regular basis to prevent mold.

9. Your AC Is Making Strange Noises

Except for the soft and oh-so-relaxing whirling sound of the fan, your air conditioning machine should be completely silent. The most common cause of screeching is an issue with the belt. Grinding noises suggest a problem with the motor.

Solution

Regular maintenance may typically detect these problems before they manifest themselves, but if you hear strange sounds, contact an HVAC specialist. These are difficult problems to resolve on your own, and you run the risk of damaging the unit if you do so.

How to fix 3 common problems with your air conditioner

  • A blown fuse or tripped circuit breaker might cause your air conditioner to cease operating unexpectedly, which can be dangerous. However, it is possible that your air conditioner is just faulty. While many problems with your air conditioner would necessitate the services of a professional technician to resolve, we have discovered that a little troubleshooting can often resolve minor difficulties. This troubleshooting guide has been put together to assist you in addressing four of the most frequent problems that you may experience with your air conditioner. Remember that many frequent problems with air conditioners may be traced back to a lack of proper upkeep and maintenance. We recommend that you enroll in an annual maintenance plan for your heating and cooling systems in order to help prevent any future problems from occurring. For more information on the maintenance plans that A.J. Perri has to offer, please visit our website or get in touch with us right now. 1. Your air conditioner won’t turn on for whatever reason. To detect if the condenser is operating on your air conditioner if it isn’t turning on, first go outside and look at the unit. Check to see that the device is correctly plugged in and that your thermostat is adjusted appropriately. Simply lowering your thermostat 5 to 10 degrees to see whether this resolves your issue sounds straightforward, but be certain that your thermostat is set to cool before proceeding. Our Maintenance Manager, John, points out that many thermostats are difficult to use, and that homeowners may be able to save both time and money by reading the handbook before installing one. Then check to determine whether the problem is caused by a blown fuse or a tripped circuit breaker. However, if your air conditioner still won’t switch on or if the coil has been frozen, you may have a problem with your motor or compressor, and you will need to call a professional for assistance with the repair. 2. Your air conditioner isn’t effectively cooling the environment. If your air conditioner will power on and your thermostat is correctly adjusted, but your system is not chilling, it is possible that your air condenser is dusty or clogged with debris. It is important to examine the outdoor unit and clean the area surrounding it to ensure proper air circulation. You should also pull any weeds or debris that is restricting air circulation. After that, inspect your filter to ensure it is free of debris. We frequently discover that the filter is clogged, and when this occurs, the airflow to the evaporator coil is restricted, causing the coil to freeze. If you have pets or use your air conditioning on a regular basis, you may need to replace your filter more regularly. A good test is to take your filter out of the bag and see if you can see anything through it. If your air conditioner is still not chilling air, you may have a problem with your compressor or refrigerant, and you will need to contact a professional to diagnose and resolve the issue. 3. Your air conditioner isn’t providing enough cooling for your house. If your air conditioner is turned on and correctly configured but still fails to chill your home to your satisfaction, it is possible that you have a unit that is not adequately suited for your property. Maintaining the proper sizing for your system is essential to keeping your house cool on an ordinary summer day. It should be possible for the typical system to maintain a temperature differential of 20 to 25 degrees Celsius between the outside and inside temperatures. To put it another way, your air conditioner is not meant to maintain your home at 68 degrees while the temperature outside is 95 degrees. In the event that it is a typical summer day and your air conditioner is still unable to keep up, you may have a problem with the charge or with the evaporator coil being frosted. If you notice ice forming on your outside unit, turn it off and contact a professional immediately. A.J. Perri has been providing heating, air conditioning, plumbing, and indoor air quality systems to New Jersey residents since 1971. He has years of experience and a national reputation for superior technical skills in the areas of heating, air conditioning, plumbing, and indoor air quality systems. These counties include Monmouth, Ocean, Mercer and Middlesex counties, as well as the towns of Morris, Essex and Union. 732.606.4920 is the number to contact if you need additional information. Visit their website for more information. The editorial and journalistic staff of the USA TODAY Network were not engaged in the development of this content, according to the sources.

My AC Is Running But Not Cooling the House

You should be concerned if your air conditioner suddenly stops working; however, it might be caused by a blown fuse or trip circuit breaker rather than something more serious. Many air conditioner problems require the services of a professional technician to be resolved; however, we have found that a little troubleshooting may often resolve basic problems on their own. This troubleshooting guide was created to assist you in resolving four of the most frequent issues that you may face with your air conditioner.

  1. It is crucial to note that many frequent problems with air conditioners may be traced back to a lack of proper maintenance.
  2. To find out more about the maintenance plans that A.J.
  3. You are unable to turn on your air conditioner.
  4. Please double-check your electrical connections and that your thermostat is correctly configured.
  5. Our Maintenance Manager, John, points out that many thermostats are difficult to use, and that homeowners may be able to save both time and money by reading the handbook before using the thermostat.
  6. However, if your air conditioner still won’t switch on or if the coil has been frozen, you may have a problem with your motor or compressor, and you will need to consult a professional for assistance with the repair.
  7. Your air conditioner is not effectively cooling the air in your home or business.

It is important to examine the outdoor unit and clean the area around it to ensure proper air circulation.

In the following step, inspect your filter to ensure that it is free of debris.

Your filter may require replacement more regularly if you have pets or use your air conditioning system frequently.

It’s possible that you have a problem with your compressor or refrigerant and will need to consult a professional if your air conditioner is still not chilling the air.

If your air conditioner is turned on and correctly configured but still fails to chill your home to your satisfaction, it is possible that you have a unit that is not adequately suited for your residence.

It should be possible for the typical system to maintain a temperature differential of 20 to 25 degrees between the outside and inside environments.

The charge on your air conditioner may be low, or the evaporator coil may be frozen if it is a typical summer day and your air conditioner still can’t keep up.

With decades of expertise and a national reputation for exceptional technical abilities in the fields of heating, air conditioning, plumbing, and indoor air quality systems, A.J.

These counties include Monmouth, Ocean, Mercer and Middlesex counties, as well as the counties of Essex, Morris, Union, and Sussex.

732.606.4920 is the number to contact if you need additional information. You may also visit their website. The editors and journalistic staff of the USA TODAY Network were not engaged in the development of this content, according to its sources.

  1. This means that your thermostat is turned on. The air filter in your vehicle is clogged. There’s something wrong with your outdoor unit
  2. The circuit breaker in your home has tripped

If you’ve checked for the issues listed above and your air conditioner is still not cooling the house, you may have a more serious issue that necessitates the services of a professional. In this essay, we’ll cover the following topics:

  • We’ll walk you through the four troubleshooting steps you should take before bringing in a professional
  • If you’ve tried all of your troubleshooting options and are still encountering problems, describe the broader issues you may be experiencing.

Do you require the services of a New Jersey professional to diagnose and repair your air conditioner? Simply get in touch with us. Before calling a professional, try these four troubleshooting methods first. Whether your air conditioner is operating but your home isn’t cooling down, check to verify if the following are true:

1. Your thermostat is switched to ON.

It is possible that your thermostat switch is set to ON, which means that your blower will operate continuously—even when your system is not cooling your home—resulting in warm air flowing out of the vents. What to do to repair it: Set your thermostat to AUTO (as seen in the image below) so that air only comes out of your vents when the air conditioner is cooling.

2. Your air filter isn’t dirty.

A clogged air filter restricts the passage of air through your system, requiring your system to work harder to cool your house. What to do to repair it: The moment has come to change your dirty filter with a new one, just like the filter on the right in the image below.

3. Your outdoor unit is dirty.

If your condenser (the outside device that expels heat from your house) is unclean or coated with debris, it will be unable to effectively expel the heat from your home. What to do to repair it: Make sure there isn’t any trash around and use a garden hose to carefully clean the condenser fins. If you use a strong stream, you risk damaging the condenser fins, which enable airflow to cool the refrigerant and cause it to leak. An illustration of a clogged condenser

4. Your circuit breaker is tripped.

Most air conditioners are equipped with two circuit breakers: one for the outside unit and another for the interior unit. If the circuit breaker for the outdoor unit has tripped, the interior unit will continue to blast air into your home, but it will be warm. What to do to repair it: Check your breaker box to verify whether the breaker for the outside unit has been tripped. If it has, make sure it is turned on. If it trips again, do not attempt to reset the device. This indicates that there is a more serious electrical problem that will require the services of a specialist.

You’ll most likely need to consult with a specialist.

Problems that an air conditioning technician will have to repair Now, we’ll go through a few warm-air AC issues that will necessitate the hiring of a professional to resolve.

Problem1: Refrigerant leak

The refrigerant is the liquid or gas that is responsible for absorbing heat from the air in your house. The cooling capacity of your air conditioning system will be reduced if the refrigerant levels are low in the system.

The problem is this: The refrigerant circulates through your system in a closed loop. As a result, if your system is running short on refrigerant, it is likely that you have a leak. Other indications that you have a refrigerant leak are as follows:

  • Freeze-up of the refrigerant line on your outside unit (you’ll be able to see the accumulation of ice)
  • You might sense warm air coming from your air conditioning vents. When you are near the air conditioner, you hear a hissing/bubbling sounds (this implies a serious leak)

Ice accumulation on your outdoor unit’s refrigerant line; Frozen refrigerant line on your inside unit; Air conditioning vents in your home are blowing warm air at you. It seems like there is a large leak near the air conditioner because of a hissing/bubbling noise.

  • How Often Should I Charge the Freon in My Air Conditioning System? What is the cost of an R-22 refrigerant recharge for my central air conditioning system?

Problem2: Leaky ducts

The frequency with which my air conditioner should be recharged is a good question. Approximately how much does it cost to recharge the R-22 refrigerant in my home air conditioning system?

  • Energy bills that are higher than usual
  • You have rooms that are difficult to keep cool
  • It is abnormally dusty in your house (due to the dust in your attic)

Ducts that have leaked will require the services of an expert who will seal them with mastic sealant or metal tape to keep the air circulating.

Problem3: A bad compressor

The compressor is at the heart of your air conditioning system. It circulates the refrigerant, which takes heat from the air in your home and discharges it to the outdoors. It will be difficult for your air conditioner to effectively chill your house if your compressor is not pumping refrigerant as it should. Typically, the compressor is found in the outside unit of an air conditioner. In the event that a problem with the compressor arises, you will very certainly be required to replace it (vs just repair it).

Unfortunately, the compressor is the most expensive component of the air conditioning system.

Do you require an AC repair technician in New Jersey?

You can expect the same level of care that we would provide to our own parents when one of our trusted AC experts visits your house to figure out the problem and repair your central air conditioner.

AC Not Blowing Cold Air: 5 Reasons Why This is Happening

Is your air conditioning unit not blowing cold air? If you wake up or return home to find that your air conditioner isn’t operating correctly, it’s the last thing you want to experience. Apart from being extremely inconvenient, this can also pose a health concern to you and your family, as well as to any pets you may have in the house. As soon as you become aware of an issue, you should take prompt action to resolve it. Do not wait until the heat gets oppressive before taking action. Never hesitate to call a professional for an HVAC service call if you are in any doubt.

Check out this list of things to look for if your air conditioner isn’t blowing cold air and how to remedy the problem.

How Does a Central AC System Work?

It will be beneficial to learn how your air conditioning system operates in order to better comprehend what may be causing it to malfunction. The liquid refrigerant used by your air conditioning machine is called a refrigerant. During the cooling process, this liquid runs through the interior evaporator coils, which absorb the heat generated within your house. This liquid is transformed into an ice gas as a result of absorbing the heat. It is the fan of the air conditioning unit that blows over those refrigerant-cooled coils and forces cold air through the ductwork to circulate throughout the house.

This procedure is repeated over and over again to keep your home cool. There are a variety of issues that might arise as a result of the large number of processes. Let’s take a look at the top five candidates.

1. Leaking or Low Refrigerant

The refrigerant, which is most often known as Puron or R410A, is the chemical that initiates the entire process and keeps it running. If your central air conditioner isn’t delivering cold air, it’s possible that the refrigerant is faulty. It is possible that the unit is running short on refrigerant and will require new refrigerant to be supplied. A leak is the most likely source of this problem. A leak not only prevents the air conditioning unit from cooling correctly, but it can also cause additional problems in the home as a result of the leak.

If you suspect a refrigerant leak, you should contact a qualified HVAC specialist as soon as possible.

See also:  Honda Civic pop or clunk noise?

2. The Filter Is Dirty or Clogged

Filters that are unclean or clogged are another typical problem with air conditioning equipment. Throughout the year, these filters work tirelessly to capture hair, lint, dust, and pollen, among other things. If they are not replaced on a regular basis, they will quickly become overflowing. When this occurs, the air cannot flow properly into the home, and your air conditioning machine may shut down as a result of a lack of sufficient air. The temperature inside the house rises dramatically if the air conditioner is not functioning correctly.

It can also cause damage to the evaporator coil and condenser, resulting in a far more serious problem.

If you have indoor pets, you may find that you need to replace the bedding more frequently.

An AC professional, on the other hand, can assist you if you are unclear about the proper filter to use.

3. There Is a Problem With the Evaporator Coil or Condenser

However, even though the filters indicated above try their best to keep the coils clean and working at top efficiency, even the coils will begin to wear down after a period of use. The continual dampness can cause mildew and even mold to grow on your interior evaporator coil, which can lead to expensive repairs. (UV lamps can help prevent this from happening and keep your air cleaner.) Coils can also get frozen if the amount of refrigerant in the system becomes depleted. Problems with the coils will create significant disturbance within the air conditioning unit and should be addressed by a qualified HVAC specialist as soon as feasible.

In the event that your air conditioner is not blowing cold air and no other cause can be determined, you should also get this checked out.

4. Blocked or Clogged Registers

A clogged or blocked register (or vent) can have the same effect as a clogged or blocked air filter in terms of restricting airflow. A return air register draws air into the system, while supply vents send conditioned air into the home. Having a clog in either of these causes issues. The ventilation system circulates air throughout the home, and if something causes a clog or a leak in the ductwork, the cooling system would be adversely affected. If you see a rip or hole in your ductwork, it’s possible that chilly air is leaking out of your attic.

When something is preventing air from flowing freely near the vent itself, simply the room that contains the vent may seem warmer than the rest of the residence.

It’s also worth mentioning that vents might be accidentally closed on occasion, which is unfortunate.

If the supply vent is partially open, the room is likely to be too hot. It will ultimately get to a point where the expense of repairing your HVAC equipment will become increasingly expensive. This indicates that it may be necessary to consider replacing your system.

5. AC Not Blowing Cold Air – Thermostat Issue

The thermostat is the starting point for all of the activity. The air conditioner will not switch on until the temperature of the air in the room reaches or exceeds the control setting. The first step is to double-check that the thermostat has not been adjusted. Check to see that it is set to auto or cool. Occasionally, a thermostat will be adjusted to heat rather than cool, which will result in the problem being caused. If the thermostat has been adjusted correctly and the air conditioning is still not working, the problem may be with the thermostat itself.

If it does not address the issue, a call to a qualified air conditioning technician is recommended.

Proper Maintenance Prevents AC Not Blowing Cold Air

Maintenance for your central air conditioning equipment should be performed on a regular basis, just like any other system. Replace the filters, and have all other operating components thoroughly inspected by an expert before continuing on. HVAC maintenance tune-ups should be performed twice a year, according to industry standards. Ideally, this should take place in both the spring and the fall. The expert may inspect your HVAC system and make any required adjustments or repairs before the weather becomes too hot or too cold.

Beat the Heat With Expert HVAC Service

When the weather is hot, you’ll want to make sure your air conditioner or heat pump is in peak working order. You won’t have to wait long for the interior of your home to get unbearably hot if you have a problem with your air conditioner not pumping cool air. There are a variety of factors that might contribute to this issue, and they range from being quite simple to resolve to being rather complex. It is your responsibility to yourself and your family to have an HVAC specialist come and analyze the issue if you are unsure of the nature of the problem.

We are a Carrier Factory Authorized Dealer, and we service and repair all brands and models of air conditioning equipment for home and light commercial use.

Please contact us if you would like more information on how we can assist you in getting the cold air circulating again in your house.

What to do When Your AC Stops Blowing Cold Air

Because of the oppressive heat in New Orleans, the last thing you need is an air conditioner that doesn’t pump cool air when it needs to. Unfortunately, a variety of issues can arise that cause your air conditioning to only blast cold occasionally or not at all. If your air conditioner has stopped producing cold air, there are a few things you may do to remedy the situation.

Change the Dirty Air Filter

Your air conditioner will not function correctly if the filter is clogged. The frequency with which the filter should be replaced varies depending on the device, but in general it is roughly every two months.

Even after changing the filter, your air conditioner may continue to fail to produce cold air, which indicates that the evaporator coil is also clogged. Because you will not be able to clean the coil on your own, it is preferable to get expert assistance.

Unblock a Blocked Condenser

If dirt and debris are all over the exterior component of your HVAC system, your air conditioner will not function correctly. If you leave it unclean and clogged, it will have to work more, which means it will wear out more quickly as a result. Even if you’re proficient with DIY, you may be able to remove leaves and other debris from your air conditioning unit on your own. However, to guarantee that your condenser coil receives a thorough cleaning, you should hire a professional.

Have Low Refrigerant Replaced

It is possible for air conditioning units to run out of refrigerant. If the remainder of your air conditioner is working properly but isn’t blowing cold, you’ll need to add additional refrigerant. To replace your refrigerant, you’ll need to hire a professional. Waiting until your air conditioner stops working completely is detrimental to its health and can result in costly repairs down the line. Contact Bryans United Air Conditioningat (504) 208-2071 if the problem is not as easy as replacing your filter or cleaning leaves from your outside unit.

Photograph courtesy of Shutterstock

What to Check When My Central AC Isn’t Cooling

Summer heat without a functional central air conditioning system is the worst thing that can happen. Even though many problems require the expertise of a professional, there are several typical issues that may be resolved by the average homeowner. This article will focus on assisting you in diagnosing problems with your home’s air conditioning system, as well as guiding you through the processes to troubleshoot basic difficulties that you may encounter. We’ll also let you know which issues you can resolve on your own and which ones necessitate the hiring of a professional for air conditioning repair.

Let’s get this party started!

A Step-by-Step Guide to Diagnosing Central AC Problems

Turn on your air conditioning and reduce the temperature on your thermostat by 5-10 degrees from the present temperature, then wait 60 seconds. Is there any air coming out of your vents? Is the compressor and fan on the outside of the house turned on? If one of the components fails to turn on, you’ll want to double-check that each component is receiving power before proceeding. Make sure your circuit breaker is working properly (hopefully, the air conditioning breaker components are labeled).

In addition, you should double-check the batteries in your thermostat, which are located below the faceplate of the thermostat.

2. IS YOUR AC UNIT RUNNING, BUT NOT BLOWING AIR?

Placing your hand in front of the air registers while your system is running is a good idea (the vents on your floors, walls or ceiling that supply conditioned air). Do you have a sense that air is being blasted at you? Your air handler may be malfunctioning if your room is absolutely stagnant and there is no ventilation at all (blower). When was the last time you replaced the filter on your computer? Check the condition of your indoor unit, as well as the condition of your filter.

3. IS YOUR AC BLOWING AIR THAT ISN’T COOL?

Reduce the temperature of your thermostat by 5-10 degrees such that it is significantly cooler than the present house temperature. Is your thermostat set to cool and at a temperature lower than the set setting for your home? When you place your palm in front of the register, does the air seem chilly to the touch or warm to the touch?

The exterior condenser of your air conditioner is most likely malfunctioning if the air conditioner is blowing but the air is not being cooled in any way. Check to see that the fan and compressor are operating properly.

4. IS YOUR AC JUST NOT COOLING YOUR HOUSE ENOUGH?

Configure your thermostat to be two degrees cooler than the current setpoint and allow the system to run for 90 minutes to get the desired temperature. Has the temperature in your home risen or fallen (even by a degree or two)? Depending on the current outdoor temperature, it might take more than an hour of running time to reduce the inside temperature by one degree Celsius. Please be patient! If the thermostat setting does not change after 90 minutes of operation, double-check the operation of both the interior and outdoor units.

Are your expectations acceptable in terms of the temperature you hope to achieve?

What to Check if Your AC Isn’t Running at All

Your air conditioning system is composed of two independent components: the condenser, which cools the air and is often located outdoors, and the air handler, which transports the air throughout your home and is typically located inside. First, check sure that any power switches near the units, as well as the units themselves, are turned on. Inspect your breaker box to ensure that neither circuit has been shut down and that power is being supplied to each of the two circuits.

2. ENSURE THAT YOUR THERMOSTAT IS FUNCTIONING PROPERLY

If you have your thermostat set to “auto,” it’s conceivable that the thermostat is misreading the temperature and, as a result, the system is not turning on at the appropriate time. Changing the fan’s setting from “auto” to “on” may help. Is the fan activated at that point? If that doesn’t work, try changing the thermostat’s batteries. Even though the screen and indicators are still operational, there are instances in which a low power drain from the batteries might cause the thermostat to perform incorrectly.

  1. This may need the use of more complex troubleshooting techniques.
  2. Is your thermostat a WiFi-enabled/Smart thermostat?
  3. Do these sorts of thermostats require a common wire to be used as a power supply, and why?
  4. If this is not the case, you will have to run an additional wire.

IT DIDN’T WORK, NOW WHAT?

Unless all of these steps are successful, it is probable that your thermostat, motor, or compressor is malfunctioning or has failed. The item will require repair or replacement, and you will be required to hire a professional to do the task.

What to Check When Your AC is Running, But Not Blowing Air

Is the air handler turned on or off? If the compressor outside your home is working but the air handler is not, it is possible that you are chilling air that is not being distributed throughout your home. If you don’t hear the air handler operating, double-check to be sure it is turned on and getting electricity. Do you know whether there is a switch on or near the device that has been mistakenly shut down? After that, check your breaker box to make sure that no breakers have been tripped accidentally.

In some circumstances, you may be able to solve this yourself with a little web study, but in most cases, it’s best to leave it to a professional to take care of.

2. LISTEN TO YOUR AIR HANDLER

It is possible that your air handler has a damaged AC blower belt or that the motor itself is malfunctioning if your air handler is operating but not blowing air. If the air handler is humming or buzzing, but is not generating the mechanical sounds associated with a motor operating, you are most likely dealing with a problem with the motor itself, which is described below. This is undoubtedly a situation in which you will want the assistance of an expert. Whether the motor is functioning, but no air is being moved, you’ll want to check to determine if the blower belt is damaged or broken.

What to Check When the AC is Blowing Warm Air

Examine the refrigerant coils that run around the periphery of the condensing unit. They should be free of debris. Is there a layer of dust, dirt, or ice on top of them? If this is the case, you should defrost them or carefully clean them to remove the accumulation of ice. Many individuals will want to hire a professional to take care of this, but those who like to do things themselves may manage it with a little bit of study. If it doesn’t work, it’s possible that you have a low coolant level or that there are more serious problems with the compressor, in which case you’ll need to call a technician.

What to Check When the AC is Cooling, But Not Enough?

Double-check to see that your air registers (the vents that distribute cold air into the rooms of your home) are open and clear of obstructions before continuing. Occasionally, they might get blocked, or dust can accumulate over time and obstruct ventilation. Make sure that the registers are clean and free of debris and obstructions by removing them with a screwdriver.

2. CLEAN OR CHANGE YOUR FILTERS

The accumulation of dust in the filters is another source of clogging and restricted airflow. These filters should be replaced or cleaned every three to four months, but sadly, many homeowners only do so once a year or less, which is not recommended. The return vent, which draws air from your house so that it may be cycled through the cooling system, and the air handler are the two most important areas to search for problems. Examine both of these filters and consider replacing or cleaning them if necessary.

3. MAKE SURE YOUR AIR HANDLER IS CLEAR OF BLOCKAGE

It is possible for the interior unit and the evaporator coil to freeze as a result of refrigerant difficulties. Unbelievable as it may seem, the coil within your air conditioning system will turn into a massive block of ice. As the air conditioning system operates under these circumstances for a longer period of time, the block of ice grows in size. If you are having poor or no airflow, look for frost accumulation on the copper wires that connect the inside evaporator coil to the outside unit.

Additionally, look for any standing water on the floor surrounding the air handler.

When this occurs, it is possible that the condensate drain has become clogged and has to be cleaned. Even though you may wish to consult with a professional, there are some DIY options for resolving this issue available online.

Nothing Worked! What Now?!

If none of the suggestions above were successful, you will want the assistance of a specialist. It is possible that even a correctly sized air conditioning unit can struggle to cool your home on a very hot day, but if you are continuously experiencing difficulty cooling your home, you may have an undersized system. In any case, it’s time to engage the assistance of a professional to resolve your air conditioning issues. If you want assistance or have any queries, please do not hesitate to contact the professionals at Unique Indoor Comfort.

Leave a Comment

Your email address will not be published. Required fields are marked *