Warning lights on Ford Focus even when vehicle is off?

  • If traction control is manually switched off, the dashboard warning light will illuminate. The light will extinguish once the traction control system has been reactivated. The cruise control indicator dashboard light will illuminate on the Ford Focus when a speed has been set and cruise control has been activated.

Why are my dashboard lights on when the car is off?

On some cars the lights stay on for like 30 seconds after the ignition is off. But if they are on all the time even when the light switch is fully off, something is wrong, that is NOT normal. That happens sometimes due to somebody wiring some accessory to the nearest hot wire, which might be the dash lights wire.

Why won’t my dashboard lights go off?

If the dashboard isn’t lighting up at all, your car might have blown a fuse. Removing the old fuse and replacing it should get the lights working again. While the new fuse may do the trick, it could also indicate a deeper electrical problem.

How do I clear my dash warning lights?

How to Reset the Warning Lights on the Dash

  1. Open the hood of your vehicle.
  2. Loosen the nut that holds the negative terminal to the battery with the pliers.
  3. Completely remove the cable from the negative battery terminal.
  4. Leave the battery disconnected for 10 minutes to ensure that the computer is fully reset.

What does the exclamation mark mean on a Ford Focus?

This indicator light may look like a horseshoe with an exclamation mark inside it, but it’s meant to symbolize an underinflated tire. Check your tire pressure and add air as needed. If the light is flashing, have the system inspected. If the light remains on, then there could be a problem.

Why do my car lights keep blinking on and off?

One of the most common causes of headlight flickering is a dying battery. Your headlights rely on power from the battery to function properly. If the battery is failing, flickering, or dimming headlights may be the result. In this situation, you’ll want to get a free battery inspection from your local Tires Plus.

Why does my dashboard lights flicker on and off?

Most likely, flickering dash lights are due to problems with the alternator. In addition to recharging the battery, the alternator is in control of running the electrical components in your vehicle. If the alternator is failing, it may not be able to steadily supply enough current to all the components.

Why do my dash lights go off when I turn on my headlights?

When dashboard lights go dim when the headlights are turned on, it’s usually because modern vehicles automatically adjust the dashboard brightness because of the current time of the day. Try adjusting your vehicle’s dimmer switch to restore the light levels to your desired brightness.

Why do my car hazard lights keep flashing?

The flashers are controlled by electrical relays that switch power to them on and off. If the electrical relays malfunction internally, they can cause the hazard lights to act up. Another possibility could be an issue with the turn signal or hazard switches themselves, perhaps internal faults.

How do I reset my car without disconnecting the battery?

How To Reset Car Computer Without Disconnecting Battery

  1. 3.1 Step 1: Open the hood and disconnect the battery.
  2. 3.2 Step 2: Locate the car’s fuse box and remove the fuse.
  3. 3.3 Step 3: Reinstall the fuse and reconnect the battery terminal.
  4. 3.4 Step 4: Start the vehicle and perform a test run.

How do I reset my malfunction indicator light?

By far, the best way to reset the check engine light is to fix the problem that the ECM is reporting. Once the ECM sees that the problem is no longer occurring, such as a cylinder misfire or loose gas cap, it will clear the DTC and turn off the check engine light on its own.

What is the yellow light with an exclamation point?

The tire pressure warning light is depicted as a yellow tire with an exclamation point in the middle. This warning light signifies that one of the vehicle’s tires is underinflated, and – in some modern vehicles – it can indicate which exact tire has low pressure.

How do you turn off Hill Descent?

To deactivate it, push the Hill Descent control button at the top left corner of the center information screen or increase speed to over 40 mph. The feature will also shut down when the vehicle’s ignition is switched off. To activate it, depress the button again.

What does engine warning light mean on Ford Focus?

If the check engine light in your Ford Focus starts shining, that means that the problem needs fast attention and your Ford should be brought in now. This blinking light usually indicates a severe engine misfire allowing unburned fuel to be dumped into the exhaust system.

The Complete Guide to Ford Dashboard Warning Lights

Have you ever been driving down the road, taking in the scenery and listening to some excellent music, when all of a sudden you hear a beep and notice a light flashing on the dashboard? It may be a very stressful situation: While driving down the road, away from home, a warning light flashes on your dashboard, signaling that something is wrong. In the midst of terror, many drivers wonder: “Should I pull over? Should I continue driving?” Is it possible that I damaged my car? “Am I going to make it home?” This is the problem.

There are several warning lights and warnings on each Ford instrument cluster, and not all of them are detrimental.

Dashboard warning lights, also known as dashboard symbols, are intended to alert you to the presence of a problem with your car on the dashboard.

The majority of warning lights do not indicate that a vehicle is on the verge of failing.

Minor failures, such as a loosened gas cap, can cause warning lights to illuminate, causing many drivers to be startled.

What do dashboard light colors mean?

A distinct part of the vehicle’s system is represented by each warning light, which is color-coded according to the severity of the problem. Only a flashing red light indicates that you must stop quickly. On most dashboards, there are three different hues of dashboard lights: yellow, red, and orange (and, occasionally, blue or green). The most serious notifications are indicated by the color red or orange on the screen. In general, if you notice an orange or red warning light, pull over as soon as it is safe to do so and drive gently until you can figure out what is going on with the vehicle.

Ignoring a yellow light can soon escalate into a significant issue, so don’t ignore it.

Finally, green or blue (and rarely white) lights indicate that a certain component or system, such as high beams, has been engaged and is functioning correctly.

You must also look at the symbols in order to fully comprehend what is going on with your vehicle.

What do the dashboard symbols mean?

Each of the dashboard symbols represents a different part of the vehicle. Color, system, relevance, and other factors can be used to group these symbols together. Check out some of the most prevalent dashboard warning lights and their accompanying systems in this article. Engine Light: The check engine light is one of the most sensitive lights on a Ford, and it has two different warning levels. When there is a less significant problem (assuming that the vehicle is working correctly), the light will remain illuminated but will not flash.

  1. Don’t go behind the wheel of the automobile.
  2. The check engine light can illuminate for a variety of causes, ranging from an incorrectly closed gas cap to a malfunctioning catalytic converter.
  3. If it comes on, do not hesitate to act.
  4. A faulty Anti-Lock Braking System (ABS) light illuminates when the vehicle’s standard braking system is functioning properly, but the ABS is malfunctioning.
  5. Brake Lights: When the brake lights are lighted while the engine is running, the parking light is activated.
  6. Either your brake fluid is low, or there is a failure in your braking system, whichever is the case.
  7. Charging System: If you are driving while this light is on, turn off any unneeded electrical equipment that you may be using and take your vehicle to a qualified repair as soon as possible.

Remove the car from the road as soon as possible and let the engine to cool completely.

Check the amount of your coolant.

High Engine Oil Pressure: This is one of the most serious warning lights on the dashboard.

Depending on the situation, either your oil is low (and driving can shorten the life of your automobile) or there is a major failure inside the system.

Fuel is running low: This is one of the most frequent and least frightening warning lights on a vehicle’s instrument panel.

When this light comes on, your owner’s handbook will inform you how much gasoline is left in your vehicle, but it’s best to buy petrol as soon as you can after the light comes on.

When you switch on the engine, this sign lights for a brief second to show that the engine is operational and ready.

Check with a specialist as soon as possible if your car’s ignition system begins to flash or does not ignite when the vehicle is turned on.

Is the warning that is shown on your dashboard still not visible to you? The table below contains a comprehensive collection of dashboard symbols and their respective meanings.

Who do I contact about a persistent light?

What if you have a light that simply would not turn off? You’ve just turned on the television and you’re not sure what to do. To speak with a knowledgeable representative, please contact Mainland Ford. We will assure that, no matter how many lights are on when your vehicle arrives at our shop, all of the lights will be turned off when you pick up your vehicle from us.

Ford Focus Dashboard Warning Lights and Symbols

There are various dashboard warning lights / symbols with pictures and their meanings to be found in the Ford Focus series, and this section covers many of them. Dashboard warning lights may illuminate in the colors red, orange, green, or blue, with red signifying a more serious failure that necessitates prompt inspection of the vehicle. Orange lights indicate less significant problems, such as the need for a service on the vehicle. The presence of flashing red warning lights indicates a serious issue.

The light signals on your car’s dashboard may differ differently depending on when it was built and in which nation it was built.

  • Airbag, anti-lock braking system, electronic stability control (ESP), low gasoline, brake system, frost, ESP turned off

The absence of a warning light or information indicator light upon turning on the ignition indicates a problem with the vehicle’s electronic control unit. Have the system tested by a technician who has received sufficient training. The warning lights and symbols on the Ford Focus dashboard are listed here, and they apply to many different models of the Focus. A grade assist is a service that assists students with their grades.

Grade Assist

When traveling downhill, Ford Grade Assist assists the driver in maintaining vehicle speed. Grade aid can be triggered by pressing a button on the dashboard or the gear lever, depending on the vehicle. The use of grade assist helps to avoid excessive strain being placed on the gearbox or the brakes. The Ford Focus ABS dashboard warning light illuminates.

ABS warning light

It is possible that the Ford Focus ABS dashboard warning light will appear while driving, indicating that there is a problem with the Anti-lock Braking System (ABS) (ABS). Normal braking will continue to function even if the ABS is turned off. A trained technician should be called in to inspect the system as soon as possible. In order to learn more about how Anti-Lock Braking Systems (ABS) operate, see the Anti-Lock Braking Systemguide, which describes what ABS systems do, how they work, and how they aid drivers in maintaining control of their automobile.

Ignition warning light

If the ignition warning light activates while you are driving, it indicates that there is a problem with the vehicle. Remove any unneeded electrical equipment from the car as soon as possible, and get the vehicle inspected by a qualified mechanic right away.

For further information, see Why is the battery warning light illuminated. The Ford Focus airbag dashboard warning light illuminates while the vehicle is in motion.

Airbag dashboard light

When the engine is started, the symbol should be extinguished. If the light shines while you are driving, it indicates that at least one of the air bags is not working properly. Check examine this article on why is the airbag light illuminated for more information on airbags and related problems. The Ford Focus’s oil pressure warning light illuminates on the dashboard.

Oil pressure warning light

If the oil pressure indicator remains on after the vehicle has been started or glows while the vehicle is being driven, this indicates a problem. Stopping the car and turning off the engine should be done as soon as it is safe to do so. Ensure that the engine oil levels are correct – read how to check engine oil – but do not continue on your travel even if the oil levels are correct. The Ford Focus engine warning light illuminates when the vehicle’s engine is running.

Engine warning light

When the engine is operating, the engine warning light should be turned off as well. If the light comes on while the engine is running, it indicates that there is a problem. If it flashes while you’re driving, you should drop your speed immediately. Continue to avoid extreme acceleration or deceleration, and seek expert assistance if the light continues to flash. The Ford Focus’s blind spot monitor has a warning light on the dashboard.

Blind spot monitor light

When the blind spot monitor feature is turned off or when a message is displayed, the light on the blind spot monitor will glow. Car blind spot provides further information on what a blind spot is and the proper measures to employ in order to prevent a collision. Symbol for the forward alert warning light

Forward alert warning

Whenever the forward alert function is deactivated, or when a message is received, the forward alert warning light will glow. This technology alerts you of a potential accident in front of you through the use of visual and audio notifications. Only when the system is active will collision notifications be issued, despite the fact that brake assistance is always on. The Ford Focus is equipped with a frost / ice warning light.

Frost / ice warning light

The presence of frost or ice is indicated by this snowflake sign, which alerts the motorist. Sensors measure the temperature of the outside air. When the outdoor air temperature outside the vehicle is between +4°C (39°F) and 0°C (32°F), the warning light sign will glow in amber color to alert the driver. When the temperature drops below 0°C (32°F), the light will turn red. The traction control warning light on the Ford Focus is illuminated. Traction Control (Traction Control System) (older models)

See also:  3.5 liter V6 Chrysler firing order?

Traction control light

Following the activation of the traction control system, the traction control dashboard light will blink during normal driving. If the sign does not flash when the ignition is turned on, or if the symbol illuminates continually while driving, it indicates a failure with the vehicle.

The system is disabled while it is experiencing a problem. It’s also important to note that the second light indicates traction control, which is visible on earlier Focus models. The Ford Focus’s traction control warning light has been turned off.

Traction control off light

If the traction control is turned off manually, the dashboard warning light will glow to indicate this. Once the traction control system has been re-activated, the light will turn off automatically. The cruise control indication light on a Ford Focus is illuminated.

Cruise control indicator

When a speed has been chosen and cruise control has been enabled in the Ford Focus, the cruise control indication dashboard light will glow. the indication sign for the Ford Focus’s front fog lights

Front fog light symbol

When the front fog lights are turned on, this dashboard icon will come on to indicate that they are on. When the back fog lights are turned on, the emblem is turned around. The Ford Focus’s lane departure warning light is on.

Lane departure warning

This light will glow when the lane departure warning system has been disengaged or in connection with a message. The technology keeps track of lane discipline and issues warnings when a lane is drifting. The gear indicator light on a Ford Focus is illuminated.

Gear change indicator

In order to alert you that shifting to a higher gear would result in improved fuel efficiency, the gear shift / change indication light will glow on the dashboard. Periods of rapid acceleration, braking, or when the clutch pedal is depressed result in the light not being illuminated. The Ford Focus message indication light is located on the dashboard.

Message indicator light

In the event that a new message is saved in the information display, the dashboard light will glow. Depending on the severity of the message, the message indicator may be red or amber in color. The Ford Focus’s engine start/stop light is illuminated.

Engine start/stop light

When the engine is turned off in conjunction with start/stop technology, this indicator glows on the dashboard. This method lowers fuel usage while also lowering CO2 emission levels. Ford Focus warning light with a red exclamation mark and a red cog.

Powertrain warning light

The presence of a red cog and a red exclamation point on the warning light indicates a problem with the powertrain. Glow plug relay failure or glow plug failure is the most common cause of this problem. Glow plugs themselves are also a common cause. The results of the diagnostics will clarify the precise nature of the problem. The vehicle is completely safe to operate. The Ford Focus’s ESP warning light is illuminated.

ESP/BAS warning light

The ESP/BAS Ford Focus warning light is associated with the anti-lock braking system. It indicates that there is an issue with the Electronic Stability Program if this light is on. Aside from the ABS warning indication, the ESP/BAS light will frequently be illuminated. Tire Inflation Pressure

Tyre Pressure warning light

Early models of the Ford Focus may not have had the tyre pressure monitoring system (TPMS) integrated into the vehicle. To alert the driver that their tire pressure has dropped to or below the 25 percent threshold level, a tyre pressure warning light will activate on the dashboard. If you have checked your tyre pressures and they are all right, but the tyre pressure warning light continues to illuminate, you should get assistance. Check out our guide on how to reset the Ford Focus tyre pressure light if you’ve already fixed the pressures and need to turn the light off.

The low tyre pressure warning light comes on. Dashboard light for a diesel glow plug LED information light for directional indications Indicator light for the high/main beam Symbol for the indication for the headlights Reminder light for wearing a seat belt The fuel gauge has an indication light.

Other vehicle warning lights

Greetings to everyone. Problem with the dashboard – Previously, it had stayed on every now and again, and walking outside and jiggling the key around in the ignition while waiting an hour had resolved the problem. Tonight is not the night. The car was utilized for the last time yesterday evening, and the driver went to sleep immediately. When I looked out the window, the display had come back on around 3 hours after I had left the car and 2 hours after I had previously checked and turned it off.

  1. I tried it again this morning and it was still not working.
  2. On the frequent issues thread, it is suggested that this may be repaired for a low cost by bbereman But no further information is provided.
  3. The only other thing “wrong” with the car that I’ve observed recently is that it was showing the lights as illuminated on the dashboard when they were very certainly not turned on.
  4. Any suggestions for a do-it-yourself fix, or will it go back to the garage?
  5. Cheers, Nick

Ford Focus Dashboard Light Guide

The dashboard of your automobile might be a confusing area, especially if you aren’t familiar with all of the dashboard lights on the instrument panel. Understanding the meaning of these brightly colored symbols will not only help you enhance the performance of your car, but it will also help you increase the overall safety of your vehicle. Using our FordFocus dashboard light guide, we hope to educate drivers in the Los Angeles, Long Beach, and Downey areas on the most critical lights to look out for on their dashboards.

Brief Introduction to Warning Lamps and Indicators

On the Ford Focus, there are more than 25 dashboard lights, all of which are classified as warning or indicator lamps. The majority of these lights will illuminate briefly as a normal check and then switch off when the engine is turned on. If a light remains illuminated or illuminates while driving, there may be a problem. Important to remember, however, is that some of the Ford Focus dashboard lights are intended to show control settings, such as the danger lights or a turn signal, rather than a significant fault.

Ford Focus Dashboard Lights

  • Engine oil: No, that isn’t a dripping faucet
  • It is an old-fashioned oilcan, and the presence of this light indicates that there has been a fault with the engine oil system. Check the oil level in your car as soon as you are able to do so safely and stop and switch off your vehicle. If you have plenty of oil in your car, do not attempt to drive it
  • Instead, contact a trained mechanic immediately.

For the front airbag, if you observe a light that portrays a sitting passenger wearing a seat belt and holding a huge circle on their lap, you should contact a Ford approved repair shop immediately. This signal, which might be either continuous or flashing, indicates that the front airbag system is malfunctioning. Keeping the lanes clear: What looks to be a bird’s-eye view of a car between two dashed lines is actually a message from the Lane Keeping System informing you that it is active. There is no need for the driver to take any action.

Check the pressure in your tires and add air if necessary. Check to see whether the light is flashing and whether the system needs to be repaired.

  • Powertrain fault: The vehicle’s manner of informing you that a powertrain or all-wheel drive issue has been identified is represented by the double-ended wrench. Due to the seriousness of the situation, you should get your car examined immediately
  • Control of Stability: This dashboard light is represented by an automobile with two wavy lines below the car’s wheels. This signifies that the system is currently operational and that it will be turned off soon. If the light remains on, it is possible that there is a problem. Make sure your vehicle is examined by a qualified mechanic. (Keep in mind that if the word OFF shows under this light, it indicates that the driver has switched the system off. The stability control system should be turned on to take use of its capabilities.)

Don’t See the Light You’re Looking For?

  • Please contact our service staff at Norm Reeves Ford Superstore in Cerritos if this Ford Focus dashboard light guide does not address the exact light that you are seeing. We are proud to serve the communities of Los Angeles, Long Beach, Downey, and the surrounding areas. We can assist you in determining what is wrong with your Ford Focus and scheduling a repair appointment if necessary.

Ford warning lights – what they mean and what to do

Unsure of what that yellow flashing sign on your Ford’s instrument panel means? Read our guide to learn what each of the warning lights indicates and what you should do if one of them appears on your dashboard. Modern Ford automobiles – including popular models such as the Focus, Fiesta, Transit, Ka, and Ranger – are packed with a plethora of sensors that continuously monitor the performance of each system in the vehicle. The dashboard’s lights indicate which systems are currently in operation and signal when one of those systems is not functioning properly.

  • Green indicates that the system is operating well or that it is actively in use. Yellow: something is not operating properly – exercise additional caution and investigate the problem as quickly as possible
  • A red light indicates that there is a significant and perhaps deadly problem – pull over as soon as it is safe to do so.

But what exactly do all of those different symbols mean, exactly? In this tutorial, we’ll explain what the different yellow and red warning lights on your Ford dashboard indicate, why they come on, how serious the situation is, and what you should do if you see them.

Brake system warning light

Because your car’s brakes are one of the most vital safety elements, it’s critical that you respond quickly if you notice this warning light. Depending on whether the light is red and remains on after you have fully released the parking brake, or if it illuminates while you are driving, it might signal that the brake fluid level is low. This will be a job for the pros unless you are familiar with how to check your brake fluid levels on your own. If the ABS (Anti-lock Brake System) warning light is activated as well, this indicates that the braking system has malfunctioned and that your brakes may not be functioning as they should.

Avoid taking a chance on the road if your brakes aren’t working properly: dial 911 for assistance.

You can also acquire quick coverage, which may be more cost-effective if you are not a member of the organization.

Anti-lock Brake System (ABS) warning light

The anti-lock braking system (ABS) is a critical safety element that comes into play when you need to come to a sudden stop or when driving in adverse circumstances such as ice roads. The ABS light will illuminate momentarily to indicate that the system is in operation, but if it remains illuminated for an extended period of time, it may signal a problem. If the ABS light turns on on its own, you should still be able to brake normally and safely, so you may continue your journey – but keep your distance, drive cautiously, and get it examined as soon as you can.

Even if you are not a member of the RAC, you may phone their roadside assistance line on 0330 159 1111 for assistance.

Brake Pad warning light

In the event that this light illuminates, it indicates that a sensor has determined that your brake pads are too thin. This warning light should illuminate before the brake pads become dangerously thin, giving you ample time to get them replaced.

However, you should change your brake pads as soon as you can because if they are fully worn out, it might be highly dangerous for you and your passengers. For additional details, please see our brake pad buying guide. Find a parking space in a garage.

Service Engine Soon warning light

When the check engine light illuminates, it’s usually accompanied by other tell-tale indicators that the engine isn’t running correctly, such as a lack of power or stuttering when you press down on the accelerator pedal. This light might signal a variety of difficulties, ranging from simple issues such as a faulty electrical sensor to considerably more serious mechanical issues such as a problem with your emission control system or catalytic converter, among other things.

How long can you drive with check engine light on?

If your vehicle’s check engine light illuminates, you should have it inspected as soon as possible. The fact that you are still driving increases the danger of causing more, and perhaps irreversible, harm to your engine. Make use of our search engine to locate the RAC-approved garage closest to you. Find a parking space in a garage.

Engine Coolant warning light

Coolant fluid absorbs the heat generated by your engine and dissipates it through the radiator, preventing your engine from overheating and breaking down. This yellow warning light will illuminate when your coolant levels are low, serving as a reminder to you to fill them off. It is best not to make any lengthy drives without adequate coolant; instead, you should stop and top up as soon as possible, otherwise you run the risk of inflicting major harm to your vehicle. Wait until the engine has cooled down before adding more fuel.

Find a parking space in a garage.

Engine Coolant Temperature warning light

When the engine overheats, this light will illuminate to alert you. This might indicate that coolant levels are low, possibly as a result of a leak in the system, or it could indicate the presence of a more serious problem, such as a failed head gasket. If this sign is illuminated in red, you should come to a complete stop immediately because, if your engine does not have enough coolant, it might become so hot that it effectively welds itself together, inflicting irreversible damage. Before proceeding, wait until the engine has completely cooled before checking the gauge on the side of the coolant tank beneath the hood and filling it off as necessary.

In addition to checking for leaks, you should also check for signs of wear on the engine.

If the light comes back on after you have topped it up, you should get it looked out to see what is causing it to flash.

Engine Oil warning light

It illuminates when the oil temperature rises above a certain threshold, or when the oil volume or pressure falls below a certain threshold, respectively. Because engine damage may be costly or even irreversible if the oil does not lubricate the engine properly, it is critical to respond swiftly if the oil is not lubricating the engine properly. When this light illuminates, you should come to a complete stop and turn off the engine as quickly as feasible. Look under the car for any visible oil leaks, and then check the oil levels, adding more oil if necessary, before continuing.

If the oil levels are normal, it is possible that the oil pump is malfunctioning. In this instance, seek for assistance since continuing to drive might cause harm to the engine. Check out our video tutorial on how to check the engine oil on your automobile. Find a parking space in a garage.

Battery Charging System warning light

While driving, if you notice this indicator on, it means that your battery is not charging properly. An electrical system problem in your automobile might be the origin of this problem, which could be caused by a number of things, including a malfunctioning alternator or battery, a poor electrical connection, or damaged cabling. It will continue to operate normally until the battery is completely depleted; however, once the battery is completely depleted, nothing in your vehicle will function.

See also:  Battery Insulator - Put it back after replacing battery?

Find a parking space in a garage.

Airbag warning light

When this light turns red, it indicates that at least one component of the airbag safety system is not functioning properly. This could be the airbag system itself, the front passenger occupant classification system (which detects the weight and position of the front passenger in order to safely deploy the airbag), or the seat belt pretensioner system, which tightens the belt in the event of a collision. If the airbag system is not functioning correctly, it may fail to deploy in the event of a collision – or, in certain situations, it may deploy suddenly, resulting in an accident.

Find a parking space in a garage.

Stability Control warning light

This indicator light shows that there is an issue with the traction control system. Whenever the stability control system is activated, such as when driving on a slick road, the warning light will illuminate on the instrument panel. If the light continues to illuminate, it indicates that the traction control system is not functioning properly. If the system has been disabled, this indication, along with the word ‘OFF,’ will illuminate, indicating that you may have mistakenly deactivated it by pressing the ‘OFF’ button.

If the light continues to illuminate after restarting, take your vehicle to a mechanic for inspection because traction control is a critical safety element.

Powertrain warning light

When this warning light illuminates, it often signifies that there is a problem with your vehicle’s automatic gearbox. A warning light may illuminate if the transmission fluid temperature is greater than normal – or it may illuminate to act as a reminder that your transmission fluid levels are running low and that you should top them off. When this light illuminates, your Ford may automatically enter a’safe’ mode in order to assist avoid additional damage. In this scenario, you may notice a decrease in the vehicle’s performance, which will be noticeable.

However, it is advisable to get any problems checked out by a professional because continuing to drive might result in more serious damage, and automatic gearboxes can be expensive to repair if they fail. Find a parking space in a garage.

Tyre Pressure warning light

Many Ford vehicles are now equipped with tyre pressure monitoring systems, which alert the driver if the pressure in the tires drops. This might occur as a result of wear and tear or as a result of a puncture. Low tyre pressure, in any case, can result in risky driving circumstances, so lower your speed and avoid braking suddenly or making any strong steering movements. To check your tyre pressure, most gas stations and garages will have an air compressor available for your convenience. According to the manufacturer’s specifications listed in your owner’s handbook, fill the tyres with air until they are fully inflation.

Watch our video to discover how to change a tyre in 10 easy steps.

Power Steering warning light

There is an issue with the power steering, as indicated by the presence of this warning light. If the power steering system fails, you will notice that the automobile is more difficult to maneuver and that you should exercise particular caution since driving at high highway speeds without power steering assistance might be dangerous. If your vehicle is equipped with a hydraulic power steering system, a fault is frequently caused by insufficient power steering fluid. You should try to top up your steering fluid levels as soon as you can, if you know how.

Rebooting a computer may be all that is required to resolve this issue with electric-powered systems, for example.

If the light continues to illuminate, you should get your vehicle inspected as soon as possible.

Engine Air Filter warning light

The air filter in your engine prevents dust and other particles from entering into the engine’s combustion chamber. If this warning light illuminates, it indicates that the air filter has gotten clogged and is restricting the amount of air that can be drawn into the engine. While it is safe to continue driving with this warning sign illuminated, the restricted airflow will have an adverse effect on the fuel efficiency and performance of your vehicle. Replacing the filter is a simple procedure that may be completed by your local mechanic, or you can perform the replacement yourself.

Find a parking space in a garage.

Water in Fuel warning light

The air filter in your engine prevents dust and other particles from entering into the engine’s internal combustion chamber. It signifies that the air filter has grown clogged and is restricting the amount of air that can be introduced into the engine. However, the restricted airflow will have an adverse effect on the fuel economy and performance of your vehicle while the warning light is on.

Replacing the filter is a simple task that may be completed by your local technician, or you can do it yourself. Before attempting this at home, consult your owner’s handbook to see whether you will need to reset the system to clear the light. Seek out a parking space.

Glow Plug warning light

This light will generally illuminate when your Ford diesel engine is getting ready to operate. Be sure to wait until the light has gone out before starting your vehicle. If this light is flashing, it means that something is wrong with it and that the glow plugs may need to be replaced. As soon as possible, have it looked out. Glow plug failure may cause the engine to enter safe mode in order to avoid any damage to the engine. As a result of this, you may notice a substantial loss in performance until the problem has been resolved.

Fuel Cap warning light

The fuel system must be entirely isolated from the outside environment in order to function effectively. This light will illuminate to alert you if the gasoline cap is not correctly secured, indicating that there is effectively a leak in the fuel delivery system. Pull over as soon as it is safe to do so and double-check that the gasoline cap is completely closed before continuing. Once you’ve kept driving, it may take some time for the light to turn off completely. The gasoline cap should be inspected for any damage if the light does not turn off after a day or two.

If everything appears to be in order, and the system is unquestionably safe, it is possible that there is a leak elsewhere in the system that is fooling the computer.

Find a parking space in a garage.

Auto Start/Stop warning light

Fuel systems must be totally protected from the outside environment in order to function correctly. This light will illuminate to alert you if the gasoline cap is not correctly secured, indicating that there is effectively a leak in the vehicle’s system. Pull aside as soon as it is safe to do so and double-check that the gasoline cap is completely closed before proceeding. Following your continued driving, it may take some time until the light turns off. The gasoline cap should be inspected for any damage if the light does not turn off after a day or two.

The computer may be fooled by a leak somewhere in the system that appears to be completely secure.

If you’re not sure what’s wrong with your automobile, have it serviced.

Forward Alert warning light

Forward Alert is a safety function available on newer Ford vehicles that employs a sensor to scan the road ahead, assessing the distance and relative speed of the vehicles in front of you, in order to notify you if you go too near to the vehicle in front of you. If it determines that you are in risk of colliding with another vehicle, it prepares your brakes for emergency braking by applying additional force to your brakes. A accident is impending, and the system will automatically apply the brakes and retract the seatbelts to help you stay safe and secure inside.

Lane Keeping Aid warning light

Forward Alert is a safety feature available on newer Ford vehicles that utilizes a sensor to scan the road ahead, assessing the distance and relative speed of the vehicles in front of you, in order to alert you if you go too near. It is available on newer Ford vehicles.

Whenever it detects that you’re in risk of colliding, it prepares your brakes for emergency braking by applying additional force to your brakes. A collision is near, and the system will automatically apply the brakes and retract the seatbelts to help you stay safe. Seek out a parking space.

Blind Spot Monitor warning light

Ford’s Blind Spot Information System (BLIS®) employs radar to scan the blind spots on either side of your vehicle and illuminates an orange light in the matching side mirror if it detects a vehicle you aren’t looking at at the time. If this warning light illuminates, it signifies that the system is not functioning properly, and it should be accompanied by a message on the display that describes the nature of the malfunction. Sometimes this is due to dirt or debris covering the sensor, but it may also be due to severe rain or snowfall interfering with the radar signal as described above.

Find a parking space in a garage.

Ford Focus Check Engine Light

Please wait for the page to load completely.

How much does it cost to get the engine light checked?

The check engine light can indicate a variety of problems ranging from a loose gas cap to a more serious failure such as a faulty catalytic converter or a problem with one of the car’s oxygen sensors, so getting a definitive code reading and diagnosis is essential. The average cost of a check engine light diagnostic and testing is typically between $88 and $111, depending on the provider. The good news is that Coggin Ford Jacksonville provides comprehensive multi-point inspections as well as free diagnostics in the majority of situations to assist you in determining the source of your check engine light.

Ford Focus Check Engine Light

A flashing light indicates that the situation is severe, and that if it is not addressed immediately, it might result in significant damage to the vehicle. If the check engine light on your Ford Focus comes on, it signals that there is a problem that has to be addressed immediately, and your Ford should be taken in right once. An engine misfire that causes unburned gasoline to be spilled into the exhaust system is generally the cause of this blinking light being activated. There, it can quickly raise the temperature of the catalytic converter to a point where damage is inevitable, necessitating the need for a costly replacement converter.

This is a strong possibility as a contributing factor.

It is possible that if the problem is not addressed or if you continue driving, it can spread to the spark plug wires, catalytic converter, or ignition coils, resulting in a very expensive repair.

Will the check engine light reset itself?

When the problem or code that caused the check engine light to illuminate is resolved, the check engine light on your Ford Focus will normally turn off by itself. For example, if a loose gas cap was the reason of your check engine light going on, once the cap is tightened, the light will turn off by itself within a few minutes. Similarly, if your catalytic converter is failing and you’ve been doing a lot of stop-and-go driving, the check engine light may have come on as a result of the large amount of time the converter has been put through its paces.

If you drive more than that amount and the light remains on, you will need to bring the vehicle into Coggin Ford Jacksonville so that the light and code can be verified and the vehicle may be restarted.

Ford Focus Check Engine Light Codes

When the check engine light shines on your vehicle’s dashboard, it may be rather frightening to see that small light suddenly illuminate, but in truth, it is not anything that should drive you to shut down in panic right immediately. If you hear the phrase diagnostic trouble codes (DTC), this is simply another name for the codes that appear on your dashboard when your engine is running. This list contains automotive computer codes that have been saved by the ECM, commonly known as the OBD (on-board computer diagnostic system) in your Ford Focus.

The fact is that, while it may seem intimidating at first, learning how to do simple diagnostics can provide you with valuable information about your car as well as allow the Check Engine Light to do what it was intended to do: serve as a guide.

Because there are hundreds of different OBD codes, there are also hundreds of conceivable causes for the indicator to be illuminated, including the following:

  • Issues with emissions controls
  • Problems with the computer output circuit
  • Gas cap that is either loose or missing
  • O2 sensor
  • Bad spark plugs
  • An old battery
  • And other issues. Faults with the ignition system
  • Problems with the fuel and air metering systems
  • Problems with transmission

This is why it is critical for someone who does not have a great deal of automotive expertise to refrain from making assumptions about what a code indicates. When your vehicle’s check engine light illuminates, you should have it checked out by a skilled Ford repair as soon as possible. If the engine light turns on as a result of a serious problem, you run the danger of further harming your vehicle if you do not address the problem immediately. For more information, call Coggin Ford Jacksonville at 9047478996 or book your check engine light service online now!

See also:  Check engine light on ABS light on GM vehicles?

Ford Focus Check Engine Light Flashing

We know from years of offering Check Engine Light Diagnosis Service that there are several typical explanations for an illuminated Check Engine Light, including something as simple as a loose gas cap, despite the fact that there are several probable causes. Other typical causes of a Check Engine Light include a filthy mass airflow sensor, a failure with the fuel injection system, a malfunctioning emissions control part, a bad head gasket, a damaged oxygen sensor, or a set of defective spark plugs, to mention just a few examples.

When this occurs, the Check Engine Light is turned off, and you may walk out of the repair shop certain that your Ford problem has been resolved.

In order for the sensors to continuously monitor situations, they must also communicate data to the electronic control unit.

However, this is the limitation of the Check Engine Light – it will not tell you what is wrong with your vehicle or what you need do to fix it.

The solution lies with us; Coggin Ford Jacksonville offers a Check Engine Light Diagnosis Service that pinpoints the source of the problem and provides you with a recommendation on what to do next from a Highly Qualified Service specialist. Contact us now to learn more.

How many miles can you drive with the check engine light?

If your check engine light is illuminated, we urge that you pull over and contact Coggin Ford Jacksonville for assistance in determining if your vehicle is safe to drive in or whether a tow truck is necessary for your safety. Attempting to comprehend the code and then planning your tactics accordingly is the best course of action. It might be anything from a faulty sensor to faulty plug wires that require replacement. Because each check engine code has a different level of severity, it is necessary to forecast how many miles you will be able to drive with the check engine light illuminated.

What could cause the check engine light to come on in a Ford Focus?

Your gas cap might be loose or need to be replaced if your check engine light turns on. If this is the case, tightening or replacing your gas cap could solve the problem. On the other hand, your vehicle’s check engine light might also be an indication of a significant malfunction that could cause serious damage to your engine and result in a large repair expense. The check engine light will either glow or blink depending on your vehicle’s make and model. A constant glow normally signals something less serious, however a flashing check engine light indicates that your vehicle’s engine is in significant condition and that quick assistance is required to fix the problem.

The following is a list of the most typical reasons why your check engine light may illuminate:

  • A new O2 Sensor (Oxygen Sensor) is required for your vehicle. The Oxygen Sensor, often known as the O2 sensor, is responsible for measuring the quantity of oxygen present in your exhaust. The presence of extra oxygen in your exhaust system causes gasoline to burn more quickly, resulting in a vehicle that is less rational when it comes to fuel efficiency. One of the most common and regular reasons for this is that the gas cap on your Ford Focus is loose, broken, or not there. The gas cap on your Ford Focus is useful for a variety of reasons. In addition to preventing gas fumes from being emitted when you are not driving, it also helps to maintain pressure within the fuel tank by securing the fuel system. What happens if you have a faulty gasoline cap on your vehicle? If your gas cap is old or has a burst seal, you may lose gasoline through evaporation, which will result in more trips to the gas station and more money spent. Fortunately, replacing a gas cap is not a costly endeavor. If your Ford Focus’s check engine light illuminates immediately after you fill the tank with gas, the first thing you should do is double-check that the gas cap isn’t loose — or that it’s still on the car’s roof or at the fuel pump
  • Otherwise, your Ford Focus has a vacuum leak and needs to be repaired. Every Ford Focus is equipped with a vacuum system that is capable of performing a wide range of tasks. The vacuum system also contributes to the reduction of hazardous emissions by directing fumes away from the engine when fuel evaporates through the engine. Whether your engine’s RPM is high at idle or surges at random, a vacuum leak might be the source of the problem. Vacuum hoses can dry up and break over time, especially if they’re subjected to high heat or cold for an extended period of time. There are problems with all aftermarket parts. If an aftermarket alarm, exhaust, or other distinguishing feature is not properly fitted, it might cause significant damage to your Ford Focus. These aftermarket components and accessories have the potential to deplete the battery, activate the check engine light, or even prevent the car from starting altogether. Whether these problems seem familiar, bring your Focus to Ford and let our team of qualified mechanics check to see if your aftermarket parts were properly fitted and aren’t the source of the problem. Getting accessories, especially aftermarket parts and accessories, or using OEM parts in the earliest possible time may cost a little more money up front, but it may save you money in the long run by avoiding the expense of having to have poor work and damage caused by poor installation work repaired. Your catalytic converter has failed or is about to fail. This component of your Ford Focus’s exhaust system is known as a catalytic converter. One of the functions of the catalytic converter is to convert the carbon monoxide produced during the combustion process into carbon dioxide. In most cases, neglecting maintenance results in a broken catalytic converter, which is why Coggin Ford Jacksonville includes a comprehensive multi-point check with every Ford service. The failure to repair a problem with your catalytic converter will result in your Ford Focus failing an emissions test, exhibiting poor engine performance, and reducing your fuel efficiency. Also possible is that your automobile will operate at a greater temperature, which might produce separate difficulties as a result of overheating
  • The battery is low or completely dead. The battery in your Ford Focus is on the verge of failing completely. Your car won’t start, it won’t illuminate the road ahead, it won’t play the radio, and it won’t charge your phone if it doesn’t have a battery. Car batteries today last far longer than they did only a few decades ago, and they require little to no maintenance in most cases. The cost of a new one varies depending on the model of Ford you drive, but you may save money by taking advantage of our current service discounts and promotions. The mass airflow sensor (also known as the MAF) in your vehicle has to be changed. The mass airflow sensor in your Ford Focus is responsible for determining how much fuel is required to run your engine effectively. It does this by measuring the amount of air that enters the engine. The mass airflow sensor, which is a component of the engine management system, aids in the adaptation to conscious changes, such as altitude. This might be an indication of a poor mass airflow sensor
  • If your Ford Focus is having difficulties starting, idling rough, or has an abrupt shift in the position of the throttle pedal, it could be a sign of a bad mass airflow sensor
  • New Spark Plugs or Plug Wires are required for your Ford Focus. The spark plugs in your vehicle’s engine are the components that ignite the air/fuel combination in the combustion chamber of the vehicle’s engine. This explosion is responsible for the movement of the pistons and the operation of the engine. The spark plug wires are responsible for delivering the spark from the ignition coil to the spark plugs in the engine. If your spark plugs or spark plug wires are damaged or old, you may notice a reduction in performance and increased power consumption. Occasionally, your engine will have difficulty starting or continuing to operate in certain severe circumstances. So what happens if I don’t replace your O2 sensor? Worn spark plugs and plug wires can create a blocked catalytic converter or damage to the ignition coils and O2 sensors, which can lead to more expensive repairs. A defective sensor can have a negative impact on your miles per gallon, but it can also cause damage to your catalytic converter and the spark plugs in your Ford Focus as well. The oxygen sensor transmits data to the vehicle’s internal computer, which uses the information to decide the optimum combination of air and fuel that enters the cylinders of your engine. A faulty oxygen sensor might potentially result in a vehicle failing an emissions test.

What Does the Check Engine Light Mean?

It is necessary to replace your O2 Sensor (Oxygen Sensor). Known as the oxygen sensor, this device measures the quantity of oxygen present in your vehicle’s exhaust system. As a result of having too much oxygen in your exhaust system, gasoline burns more quickly and your car becomes less reasonable when it comes to fuel economy. One of the most prevalent and regular reasons for this is that the gas cap on your Ford Focus is loose, broken, or not there at the time. Several functions are carried out by the gas cap on your Ford Focus vehicle: During non-driving periods, it prevents gas fumes from escaping, closes the fuel system, and aids in the maintenance of fuel tank pressurization.

In the event that your gas cap is old or has a broken seal, you may experience gasoline loss through evaporation, resulting in extra trips to the pump.

If your Ford Focus’s check engine light illuminates immediately after you fill the tank with gas, the first thing you should do is double-check that the gas cap isn’t loose — or that it’s still on the car’s roof or at the fuel pump; otherwise, your Ford Focus has a vacuum leak, which you should address immediately.

  1. The vacuum system also contributes to the reduction of hazardous emissions by directing fumes away from the engine when fuel evaporates.
  2. When vacuum hoses are exposed to intense heat or cold for an extended period of time, they can get dry and crack.
  3. Incorrect installation of an aftermarket alarm system, exhaust system, or other distinguishing component might cause significant damage to your Ford Focus.
  4. Consider bringing your Focus to Ford to have our team of qualified mechanics inspect it to confirm that your aftermarket components were properly fitted and aren’t the source of all your problems.
  5. Carbon monoxide is produced during the combustion process and is converted into carbon dioxide by the catalytic converter.
  6. If you have a problem with your catalytic converter and don’t have it fixed, your Ford Focus will fail an emissions test, exhibit poor engine performance, and have a severe impact on your gas mileage.
  7. Your car will not start, it will not illuminate the road ahead, it will not play the radio, and it will not charge your phone if it does not have a car battery.
  8. New Fords are priced differently depending on the model you drive, so check out our current servicing discounts and promotions.
  9. This sensor, located in your Ford Focus’s mass airflow sensor, calculates how much gasoline is required to operate your engine effectively by monitoring the amount of air that enters the engine.

This might be an indication of a poor mass airflow sensor; if your Ford Focus is having difficulties starting, idling rough, or has a rapid shift in the position of the throttle pedal, it could be a sign of a bad mass airflow sensor; New Spark Plugs or Plug Wires are required for your Ford Focus; It is the spark plugs in your vehicle’s engine that are responsible for igniting the air-fuel combination in the combustion chamber.

  1. When the pistons are moved by this explosion, the engine may start.
  2. The performance and power of your vehicle may suffer if your spark plugs and spark plug wires are damaged or out-of-date.
  3. So what happens if I don’t replace your O2 sensor?
  4. It is possible that a malfunctioning sensor may not only reduce your miles per gallon, but it may also cause damage to your catalytic converter and the spark plugs in your Ford Focus.

A noble mixture of air and fuel is determined by sending data from the O2 sensor to the vehicle’s onboard computer, which is located in your dashboard. Unreliable Oxygen Sensors might also result in a vehicle failing an emissions test.

Is it safe to drive your Ford Focus with the check engine light on?

This is a difficult question to answer since the severity of the problem is dependent on the severity of the question. As long as the source of the problem is a small one, such as a loose gas cap, the vehicle should be safe to drive. The check engine light will often remain illuminated for an extended period of time. The performance of your car may have changed, which might be an indicator of a more serious problem with the vehicle. A flashing check engine light indicates a serious problem with your Ford Focus, and it is essential that you have it serviced as soon as possible to avoid further damage.

Alternatively, slow down and bring your Ford to one of our qualified experts as soon as is reasonably possible.

Check Engine Light Service Ford Focus

What do you do when you’re traveling in your Ford Focus and a yellow light appears on your dashboard, indicating that the engine needs to be checked? Your heart falls a little, if you’re like the majority of Ford owners, since you have no idea what that light is trying to tell you or how you should respond. Stress can be exacerbated by apprehension about the unknown (or the potential expense of the unknown). But take a deep breath and understand that just because the light is on doesn’t mean you have to pull over to the side of the road and call a tow truck, it is highly advised that you have your Ford Focus examined as soon as you can.

When the ECM (electronic control module), which is the vehicle’s onboard computer, detects a fault in the electronic control system that it is unable to rectify, the check engine light illuminates on your Ford Focus.

This code is scanned by our Ford vehicle repair experts at Coggin Ford Jacksonville using an electronic scan instrument, which they use to diagnose the problem.

While this code will inform you of the problem that has been found, a true diagnostic will still need the services of a qualified expert to establish the problem and correct it.

Leave a Comment

Your email address will not be published. Required fields are marked *