2008 Ford Ranger Module Locations? (Question)

ABS Control Module Left side of engine compartment. Occupant Classification Sensor (OCS) Module Under passenger’s seat. Passenger Air Bag Module Behind right side of dash.

Where is airbag module located in a Ford Ranger?

In most cars it is under the center console that is between the two front seats, or center of the dash on the floor.

Where is door switch on 2008 Ford Ranger?

Clutch Pedal Position Switch Behind left side of dash, top of brake pedal support. Deactivator Switch Under left side of dash. Door Ajar Switch (Passenger Side Rear) Bottom rear of right rear door. Door Ajar Switch (Right Front) Rear of passenger’s door.

Are 2008 Ford Rangers reliable?

Great Used Ford Ranger 2008 The truck has been very reliable and runs well. It shows very little wear and tear for a 2008.

Where is the dome light switch in a Ford Ranger?

The dome light switch is located in the door panel of the Ford Ranger. The dome light switch on a 2020 Ranger is the lamp itself. Just push the lamp on and off. All cab lights are controlled near the rear view mirror courtesy lights A-B-C switch.

How do you turn off the door chime on a Ford Ranger?

The easiest way to disable the door chime in the Ford Ranger PX2 Is to de-solder the electrical connection to the chime itseLFAnd remove it from the circuit board. To do this You will first need to remove the radio and the HVAC duct above it.

How many miles can a 2008 Ford Ranger last?

Fortunately, the new Ford Ranger is one of those trucks. Because, according to Motor and Wheels, you can count on the Ranger to last up to 300,000-miles.

How long can a 2008 Ford Ranger last?

How long do Ford Rangers last? The Ford Ranger can last up to 20 years with no major faults. Even though the truck is overshadowed by the F-150, the Ranger is solidly built and will push the 300k-mile threshold with little trouble.

What is a 2008 Ford Ranger worth?

Used 2008 Ford Ranger Pricing A Ranger XL Regular Cab’s Manufacturer’s Suggested Retail Price (MSRP) starts just under $15,000, while the XLT trim with the seven-foot bed starts around $17,000. The Ranger SuperCab XL starts around $16,000.

2008 Ford Ranger Sensor Locations

The sensors seen in this picture are not necessarily indicative of those that may be found in your vehicle. This page contains a comprehensive list of all of the vehicle’s sensors.

Find lots of other information for your Ford Vehicle.To find fuse diagrams,click hereTo find Relay locations,click hereTo find Sensor Locations,click hereTo find Module Locations,click hereTo find Switch Locations,click hereTo find Firing Order,click here

Camshaft Position Sensor (2.3L) is located at the rear of the engine. The camshaft position sensor (3.0L) is located at the top rear of the engine. The camshaft position sensor (4.0L) is located at the top left of the engine. (2.3L) Crankshaft Position Sensor (2.3L) is located in the lower right front of the engine. Lower front of the engine houses the crankshaft position sensor (3.0L). Crankshaft Position Sensor (4.0L) is located in the front of the engine, at the bottom. Sensor for the temperature of the cylinder head The right-hand side of the cylinder head.

Sensor for Differential Pressure Feedback EGR (DPFE) (4.0L) located on the top left rear of the engine.

Sensor for Engine Coolant Temperature (ECT) (3.0L) located at the front of the engine’s top.
Front Impact Severity Sensor (Left) is located on the left-hand side of the engine compartment.
Sensor for the Pressure Transducer in the Fuel Tank During the gasoline tank building process.
Heated Oxygen Sensor (HO2S)11 (3.0L) is located in the exhaust system at the right rear of the engine compartment.
In the exhaust, there is a heated oxygen sensor (HO2S)12 (A/T) at the right rear of the transmission.
Heated Oxygen Sensor (HO2S)21 (3.0L) is located in the exhaust system on the left rear of the engine compartment.
In the exhaust, there is a heated oxygen sensor (HO2S)22 (3.0L).

It is located in the exhaust at the left side of the transmission, near the 4.0L engine and the A/T.

Sensor for the Intermediate Shaft Speed (ISS) (A/T) Transmission is on the left-hand side.

Knock Sensor (3.0L) is located on the right side of the engine.

Absolute Pressure (MAP) Sensor in the Manifold The very top of the engine.

In the air cleaner assembly on the right side of the engine compartment, there is a sensor for mass airflow and intake air temperature (MAF/IAT).

Sensor for Output Shaft Speed (OSS) (A/T) is located on the left rear of the transmission.

Sensor for the Rear Axle Speed The top of the rear differential is visible.

Safety Belt Tension Sensor (2-Door Super Cab) is located at the base of the right “B.” Located at the bottom of the right rear door on a 4-Door Super Cab, the Safety Belt Tension Sensor.

Seat Pressure Sensor is located beneath the passenger’s seat.

Throttle Position Sensor (TPS) (3.0L) is located on the throttle body, on the top left front of the engine.

Wheel Speed Sensor (Left Front) The wheel speed sensor is located on the left front wheel. Speed sensor for the right front wheel is located on the right front wheel. Rick Muscoplat posted a blog entry on

8L5A-12A650-AFC

All of our products are backed by a lifetime guarantee. The warranty does not cover any labor costs involved with the installation and/or removal of the items, as well as any key and/or locksmith fees incurred. There will be NO REFUNDS for any of these costs, and there will be NO EXCEPTIONS. In consideration of the foregoing, the Buyer acknowledges and agrees that the Seller’s liability is limited to the price of the item sold and that the Seller is not liable for any damage and/or injury sustained as a result of any item(s) sold by any entity operated by Flagship One, Inc, and that the Buyer hereby now and forever releases Seller from any and all such liabilities.

Otherwise, the return would be ruled invalid.
If an unauthorized return is not claimed within 45 days or is not accompanied by an RMA, Seller maintains the right to retain custody of the unclaimed/unauthorized return.
When you return an item, it will be handled in the order in which it was received, and it may take longer to process than an order.
In order for the warranty to be effective, the buyer must activate it within 20 days after receiving.
When things are returned that have been programmed, there is an extra $85 non-refundable programming cost, and if the Buyer purchased keys, the return is subject to a $90 non-refundable key fee.
Returns received after 30 days from the date of the initial purchase will be eligible for an exchange or in-store credit, depending on the circumstances.
As a condition of replacement, Seller explicitly maintains the right to compel the Buyer to return an alleged faulty or damaged unit to Seller at the Buyer’s cost for testing prior to replacing the unit.

FAQ

Q: What is a Vehicle Identification Number (VIN) and why do you need one? The term “vehicle identification number” (VIN) refers to a unique code that is assigned to each automobile by the manufacturer. Because no two automobiles have the same VIN number, the VIN serves as a kind of fingerprint for the vehicle. A vehicle identification number (VIN) is made up of 17 characters (including numerals and capital letters) that serve as a unique identifier for the vehicle. In this case, each character is utilized to allude to the vehicle’s specific characteristics, specs, and manufacturing company.

In our situation, the VIN is utilized to determine which module is appropriate for a specific car model.
Control modules that do not require any further programming (also known as PlugPlay or Plug ‘N Drive) fall under this category.
Each and every one of our Chrysler, Dodge, Plymouth, and Jeep units is sold as a PlugPlay.
This word refers to the programming procedure that our mechanics undertake on all of the control modules that have been provided.
These upgrades can aid in the improvement of the vehicle’s performance as well as its fuel efficiency.
Following the placement of an order, there is a 1-3 day processing wait.
For the most part, this takes 1-3 business days on average, with the majority of our modules being delivered to the customer in less than 5 business days.
q: Can you tell me where I can get my VIN?
Additionally, the title, registration, or insurance card of the vehicle will have this information as well.

2004 keyless entry keypad module location ?

Learning to use the forums

Join Date: Jan 2016Posts: 7

2004 keyless entry keypad module location?

hello,this truck has a keyless entry keypad on the drivers door but i dont have the book or the wallet card an the used car dealer didnt know the code so im screwed, loli thought it would be some thing i could google maybe find a workshop manual with info on the RAP module but i cant find the book or diagrams,anyone know the RAP location for a2004 Ford Ranger XLT FX4 Level II 4dr SuperCab 4WD SB?please an stuff!

Ford Ranger Driver

Join Date: Sep 2010Posts: 3,127