The most common reasons a Chevrolet Silverado 1500 won’t start are a dead battery, an alternator problem, or failed starter.
- If your battery no longer has enough charge to turn the starter, your Silverado will not start. As a battery ages, it’s “cranking amps” decrease, leaving it with a diminished capacity for starting the vehicle. When this happens, you’ll often hear the vehicle crank slowly, but not start.
How do I get my Chevy Silverado out of theft mode?
How Do I Reset Anti-Theft System: Chevy Silverado?
- Insert ignition key.
- Turn it to the on position.
- Attempt to start the engine.
- Leave the key in that position until the security light stops flashing.
- Once the light goes off, switch the ignition key to off.
- Wait about five seconds.
- Try to start the engine again.
How do I reset my Chevy Silverado?
Turn the ignition to “On“. Do not start the engine. Press the accelerator pedal slowly all the way down 3 times within a 5 second interval. Turn the ignition off.
How do you reset the anti-theft on a Chevy truck?
In a chevy silverado, you will try to reset the anti-theft system by turning the key on until the yellow lock goes out on the instrument panel for about 10 minutes. Turn the key off and do it 2 more times after 3 cycles, pull the key and put it back in.
Can anti-theft stop car from starting?
It is possible that the system can trigger the car alarm or prevent the engine from running without any apparent reason. You have to shut it off if it is not working properly. The car won’t return to normal operation unless you fix the issue of anti theft device car wont start.
How do you bypass Chevy anti-theft?
Thankfully this is an easy fix.
- Leave the ignition key turned to the “On” position after the vehicle has stalled and will not start.
- Look at the dashboard and locate the theft system light.
- Turn the ignition to the “Off” position to disable the PassLock system, and wait for 20 seconds for the system to reset.
Why is my Chevy Silverado screen not working?
If the touch screen is not working in Your 2019 Chevy Silverado the most common reason is that the software has frozen. You will want to first try to restart the head unit. If Your screen is not powering on then the thing You should check are the fuses. These can become damaged due to shorts.
How do I reset my Chevy ECM?
There’s no complicated reset procedure; You just need to cut off power for a long enough time where the ECM forces a reset when it regains power once more.
How do I get my truck out of theft mode?
Step 1: Insert the key into the door lock. Use the side door on the driver’s side and the physical key even if there is a keyless entry system on the car. Step 2: Turn the vehicle key to unlock the car door without releasing it. Hold the key for 30 seconds in the position.
What does a car with a lock symbol mean Chevy?
The lock and car symbol and warning light you are seeing is saying that the anti-theft system has been activated. If the anti-theft system is stopping the vehicle from wanting to start, it may be contributing to the starting issues. The first thing you should do is try to deactivate the security system.
How can I bypass pass theft deterrent system?
Leave the key in the ignition for 10 minutes. Turn the key to the “off” position — and leave it there for 20 seconds — after the anti-theft light stops blinking. This disables the Passlock system; it is ready to “relearn” your key.
What would cause a Chevy truck not to start?
The most common reasons a Chevrolet Silverado 1500 won’t start are a dead battery, an alternator problem, or failed starter.
Where is the starter relay located?
The starter relay is most often located under the car hood, found in the power distribution center. It can also be located in the fuse block in the cabin.
Chevrolet Silverado 1500 won’t start – how to fix it?
The concern that a costly fault is to blame for the starting issues of a Chevrolet Silverado or a GMC Sierra is often baseless, according to research. Often, the root reason is one that is rather simple to address. A look at the 2020 Chevrolet Silverado LTZ (photo by Chevrolet) Although there are several probable causes for a Chevy Silverado 1500 not to start, there is a limited number of solutions. It might be anything from a simple shortage of gasoline to a depleted battery to a faulty ignition switch.
A vehicle’s starting troubles might manifest itself in a variety of ways.
If the underlying problem isn’t resolved, the vehicle won’t start in those instances as well.
In this case, the vehicle’s behavior when the ignition key is turned on is a first indicator of the issue that was causing the troubles.
Freezing conditions cause car batteries to become clogged and their capacity to decrease. As a result, you are no longer able to fully charge your phone while driving. As a result, the majority of start-up issues occur on cold winter mornings. The starter will hardly turn and the current in the interior will fluctuate, which are both symptoms of a low or even a damaged battery, respectively. It is also conceivable that nothing happens when the ignition key is twisted if the vehicle’s battery is fully depleted of its charge.
- By turning on the inside illumination, you can quickly identify when a power storage unit is completely depleted of energy. When attempting to start the truck, if the light dims dramatically, it is most likely due to a low battery. The charge level of the battery, on the other hand, can only be accurately determined by utilizing a voltage measuring equipment.
How to fix it
When the battery is completely depleted, a jump start is required in order for the vehicle to restart. You should always keep an appropriate jumper cable in the trunk of your vehicle. The battery gets a current pulse from another vehicle, which is sufficient to start the car with its assistance. While the motor is operating, the battery can then be recharged and recovered from its discharge. The use of a battery charger is still another alternative. If the battery, on the other hand, is faulty, only an exchange in the workshop will assist.
This is very important to remember!
Defective starter motor
If the battery is in good condition, a problem with the starter may be the root reason of the vehicle’s inability to start. The starter might be damaged as a result of age-related wear or a material flaw. When attempting to start the computer, a clicking sound is frequently heard.
The component, which is driven by an electric motor, is responsible for using the current from the battery to start the engine and propel it forward. A faulty magnetic switch on the starter might potentially cause the vehicle to be unable to begin operating.
How to fix it
It is extremely unusual that a starter can be repaired. It is also tough to reach because of its location deep within the engine compartment. If the car is going to be lifted anyhow for inspection, it is best to replace the item as a safety measure. This is especially true in the case of older automobiles.
Ignition lock defective
Modern vehicles are fitted with a start button rather than the traditional ignition lock seen on older models. Another fault, on the other hand, can arise in vehicles that still have the ignition lock installed. The fact that nothing happens when the ignition key is turned is generally indicative of this. There is no indication of a bulb being lit, nor does the starter make any noise. In current autos, a fault in the chip card or the chip implanted in the key might cause difficulties that are similar to those described above.
How to fix it
Only the repair of the damaged ignition lock or the replacement of the defective chip card Or the replacement of the defective key would restore the car’s ability to start.
Fuel tank empty
Due to the fast-paced nature of everyday living, it is possible to forget to refuel your vehicle. Frequently, this results in the engine stalling while driving and being unable to be restarted after it has stopped. One of the most common signs of a low gasoline tank (located next to the fuel gauge) is an engine that starts momentarily but then shuts down again quickly. This is due to residual gasoline residues that have made their way into the engine.
How to fix it
It is typically sufficient to simply replenish the gas tank and start the vehicle with a gasoline engine. Occasionally, it is required to bleed the fuel system in diesel engines. In earlier automobiles, bleeding may be accomplished manually, however in current vehicles, bleeding is accomplished with the use of an on-board diagnostics (OBD) system in conjunction with the appropriate diagnostic software.
Fuel system problems
Even though there is enough gasoline in the tank, it is possible that the fuel will not get into the cylinders and the engine will not start. A faulty fuel pump or injection system are two possibilities for the problem. Incorrect configuration of these components might potentially cause difficulties with the start-up process.
How to fix it
A workshop is required to replace any damaged components of the fuel system. Repairs are almost never feasible. The start-up difficulties, on the other hand, may be resolved quite quickly if the erroneous configuration is used.
Marten bite, lack of ignition spark and other causes
Damage to the martens is another factor that contributes to vehicle starting issues. It is more common for animals to nibble cables and wires in automobiles. These have the potential to interfere with the electrical circuit as well as the gasoline and oil supplies. Taking a peek inside the engine compartment and looking for evident damage may be beneficial if the car does not start. If these items can be located, towing to the next workshop will be necessary. Damaged spark plugs or glow plugs, as well as loosened plug connections on the ignition wires, can all result in a vehicle failing to start.
While damaged candles are difficult to notice by the untrained eye, unsecured plugs are rather simple to repair. In an emergency, the breakdown service or the workshop of choice can be of assistance. It is capable of replacing the faulty components on the spot, allowing the vehicle to restart.
Other possible causes of a non-starting vehicle:
- Foreign objects in the fuel filter
- A faulty crankshaft sensor (which causes the control unit to be unable to determine whether to inject or ignite)
- And a faulty fuel pump. The presence of moisture in the engine
- Fuel line that is clogged
- Engine damage against a repaired engine
- Carburetor that has been flooded (older versions)
- Faulty ignition coil
There are a variety of reasons why the car will not begin to run. When looking for the source of the problem, it is best to follow the exclusion principle and start with the most obvious reason, which is a dead battery. In any event, it is recommended that non-professionals call a breakdown service or a workshop for assistance. The latter has the ability to directly commence repair in the case of a malfunction.
2017 Chevy Silverado Battery
Please wait for the page to load completely.
Common Car Battery IssuesProblems – How Do You Know If Your Car Needs A New Battery?
We’ve all been there: you leave your lights on, you don’t completely close a door, you leave the radio on for an extended period of time without turning on your engine. A dead battery is one of the most commonly encountered automobile problems. But how can you know when it’s time to replace your 2017 Chevy Silverado battery? A few of the signs that your Silverado battery needs to be checked by a Chevy repair or changed are as follows: 1.
- When you attempt to start the car, it takes longer than normal for the vehicle to roll over or start
- Increased Corrosion Due to Fluid Leaks – It is not uncommon for leaks of battery fluid and other fluids to result in excessive corrosion, which is a telltale indicator that the battery needs to be replaced. Corrosion will accumulate over time in most cases, but it can be cleaned to extend the life of your 2017 Chevy Silverado battery. Low Battery Fluid Level – If the fluid level in the battery is low, you should have the battery and charging system checked. If the check engine light comes on, it means that your battery is losing charge
- Otherwise, it means that your engine is overheating.
2017 Chevy Silverado Battery
The battery in your 2017 Chevrolet Silverado will normally last between 3 and 5 years, although this might vary significantly based on weather conditions, battery size, battery type, and driving patterns, among other factors. But even if your battery isn’t fully depleted, it doesn’t always imply that it’s performing at peak performance. In order to prevent this from happening, it is critical to have your battery tested every time you visit a repair shop. It is hoped that you are a client of Hare Chevrolet, in which case you will always receive a complimentary multi-point check of your car during every service appointment.
It is possible that your 2017 Chevy Silverado will put strain on the alternator or the starter if you do not inspect your battery when it is not operating at peak performance levels if you leave it unchecked.
In the end, this will result in you having to spend more money to correct the situation.
2017 Chevy Silverado Battery Cost
What is the name of the battery’s manufacturer? Do you know what size engine your 2017 Chevrolet Silverado has? For your Chevrolet, what size battery do you require? Several factors must be considered while shopping for a 2017 Chevrolet Silverado battery, all of which will have an impact on the price you pay. Are you wanting to have our dealership repair your battery, or are you looking to purchase the battery and install it yourself instead? You should conduct extensive study before selecting a certain battery or replacement at Hare Chevrolet.
Call us at 3173336958 and our mentors will assist you in locating the best battery for your 2017 Chevrolet Silverado.
The size of a battery has the greatest impact on its pricing because it is the most directly associated factor. When your battery is larger, its Amp Hour rating is also larger, which means it will be able to supply more amps of electrical current every hour.
Is it safe to drive with the battery light on?
Unless you are driving at night, you should persuade yourself to switch off the radio, the air conditioner, and the lights. The alternator’s primary function is to recharge the battery in your 2017 Chevrolet Silverado while you are driving. You may be stuck if your alternator isn’t functioning correctly, since it might cause your battery to lose all of its charge and leave you stranded if your car is switched off. If the battery warning light on your 2017 Chevy Silverado turns on while you’re driving, you should be persuaded to turn off your accessories to prevent the battery from dumping additional power.
It’s also possible that the serpentine belt on your 2017 Chevrolet Silverado has failed.
Another possible symptom that might indicate to the serpentine belt as a potential source of the battery warning light is if steering gets difficult or feels extremely heavy when driving.
You may reach Hare Chevrolet at 3173336958 if you’re in the vicinity of Indianapolis and require servicing.
Hare Chevrolet Battery ReplacementChevrolet Batteries for sale
Unless you are driving at night, try to persuade yourself to switch off the radio, the air conditioner, and the lights. The alternator’s job is to recharge the battery in your 2017 Chevrolet Silverado while you’re on the road. You may be stuck if your alternator isn’t functioning correctly, since it might cause your battery to lose all of its charge and leave you stranded if your car isn’t running. It’s important to remember to turn off your accessories if your 2017 Chevrolet Silverado battery warning light turns on while driving so that the battery doesn’t discharge any extra power.
Also possible is that the serpentine belt on your 2017 Chevrolet Silverado has failed.
In addition to these possible symptoms, if steering becomes difficult or feels gigantic, it is possible that the serpentine belt is the root cause of the battery warning light.
You may reach Hare Chevrolet at 3173336958 if you’re in the Indianapolis area and require servicing.
Are 2017 Chevy Silverado batteries covered under warranty?
Unless you are driving at night, persuade yourself to switch off the radio, the air conditioner, and the lights. The alternator’s primary function is to recharge the battery in your 2017 Chevy Silverado while you are driving. Because of this, if the alternator isn’t functioning correctly, the battery may lose all of its power, leaving you stranded if the car is switched off. If the battery warning light on your 2017 Chevrolet Silverado turns on while you’re driving, you should be persuaded to turn off your accessories to prevent the battery from dumping additional power.
It’s also possible that the serpentine belt in your 2017 Chevrolet Silverado has failed.
Another possible symptom that might indicate that the serpentine belt is the source of the battery warning light is if steering becomes difficult or seems gigantic.
If the dashboard lights indicate overheating, it is likely that the water pump was also on that belt. If you’re in the Indianapolis area and require servicing, call Hare Chevrolet at 3173336958. We may even arrange for the delivery of your 2017 Chevrolet Silverado to our facility.
- Batteries for Silverado pickup trucks that have been recharged
- Faulty Silverado batteries that have cracks, faulty Silverado batteries that are attached to non-OEM components, faulty Silverado batteries that have been physically damaged prior to inspection
2017 Chevy Silverado Battery Price
The price of a 2017 Chevrolet Silverado is also strongly influenced by whether you choose to conduct the battery installation yourself or have Hare Chevrolet do it for you. As vehicle performance has grown over the years, hood space has reduced in proportion, and as a result, the battery is often difficult to access. According to the market, the cost of labor to install your battery may add $20 to $40 to your service bill if you don’t use a Chevy-trained technician to do it. The good news is that Hare Chevrolet provides a wide range of auto battery services and parts deals, and in many circumstances, if you purchase a battery from Hare Chevrolet, we may be prepared to professionally install your battery at no additional charge.
What Are the Best Car Batteries to Buy?
DieHard Batteries, Odyssey, NAPA, AC Delco, Duralast, and EverStart are just a few of the well-known vehicle battery manufacturers available on the market. Contact the advisers at Hare Chevrolet, and we will make every effort to assist you in selecting the ideal automotive battery for your 2017 Chevrolet Silverado depending on your needs and driving patterns. Contact us now! This is a question that can be tough to answer. In order to determine the “best” automotive battery, a variety of criteria must be considered, as many automobile batteries are developed with opposing elements in mind.
How do 2017 Chevy Silverado batteries work?
SLI is an abbreviation that stands for “starting, lighting, and ignition.” This sort of battery generates energy that may be used to power your lights, accessories, and vehicle’s ignition system. So, how do automobile batteries function? The majority of automobile batteries rely on a lead-acid chemical process to shut down your vehicle. These sorts of batteries are classified as “SLI” batteries, which stands for “Slim Line Isolation.” The alternator is responsible for supplying electricity to your engine after the energy has reached it.
Contact one of our service experts if you would like to learn more about the many varieties of backup batteries.
Call us at 3173336958 if you have any questions or to schedule your service appointment online now!
We are looking forward to collaborating with you!
How long do 2017 Chevy Silverado batteries last?
Chevrolet Silverado batteries typically last between 3-5 years, however this is subject to variation based on driving patterns, weather conditions, the kind of battery, and a variety of other factors. You may extend the life of your Silverado battery by doing the following:
- Testing your battery on a regular basis
- It is vital to keep your 2017 Chevy Silverado running continually. Keep your battery charged by not leaving it inactive for lengthy periods of time. It is best to keep your car indoors, away from significant changes in temperature or environment. Remember to keep the batteries properly attached – did you know that the vibrations of your automobile can weaken the connections and rattle the components of your battery
- And Using a wire brush and the contracted cleaning solution, clean the terminals and posts of any corrosion that has formed.
2017 Chevy Silverado Battery Replacement
Some types of batteries, particularly in newer models, might be difficult to replace since the hood area in vehicles is always being reduced in order to increase performance. Some batteries might be difficult to get to as a result of this situation. To find out exactly where your battery is placed in your 2017 Chevy Silverado, you’ll want to consult your owner’s handbook.
Some batteries, strangely enough, can be found under the floorboard or in the trunk of the vehicle; however, this is exceedingly unusual. How to change your battery is as follows:
- Make sure your engine is turned off – consult your vehicle’s handbook to find out where the battery is located
- To release the bolt that keeps the black negative battery cable in place, use a wrench. Remove the cable by twisting and tugging it away from the battery with caution – do not use excessive force or any metal items to pry the cable away from the battery. This has the potential to harm the cable. Remove the positive (red) battery cable by doing steps 2 and 3 twice more. Use a tool or a ratchet to pry out the clamp that keeps the battery in place. You should be able to remove the battery with relative ease at this point. Take care, because it will be heavy. We recommend that you clean the battery tray and any rust on the wires using a wire brush and appropriate battery cleaning solution before using the battery
- To replace the old battery, simply follow the instructions outlined above.
How do you know if your 2017 Chevy Silverado needs a new battery?
The most typical indicators of a damaged 2017 Chevy Silverado battery are if your vehicle is reluctant to start when you turn the key, or if the battery cables and connectors show evidence of significant corrosion and corrosion. You may also hear a clicking sound when you turn the key, or your electronics may function properly but the car will not start. All of these symptoms indicate that the batteries in your 2017 Chevrolet Silverado are failing. Give our knowledgeable staff at Hare Chevy a call or schedule an appointment online.
How often should you replace your 2017 Chevy Silverado battery?
Once every 3 to 5 years is sufficient, but you should get your battery inspected on a regular basis for voltage dips to ensure that it is working at peak performance. Unless you have a high-performance battery, automobile batteries normally have a voltage of 12 to 13 volts when fully charged. The presence of a voltage reading greater than 13 volts may indicate a defective battery.
2017 Chevy Silverado Battery CouponsSpecials in Indianapolis
The Chevy Silverado 2017 is eligible for monthly battery discounts from Hare Chevrolet. Hare Chevy can take care of everything, from complete battery replacement to labor cost reductions to massive discounts on battery elements and accessories. Battery replacement coupons may be found here, while savings on elements can be seen here. You can rely on our Chevy Silverado professionals to assist you with any and all of your vehicle service requirements. If you are unable to locate the battery you are searching for or would like to talk with someone about our monthly savings, please call us at 3173336958 right once.
The Top Ten Check Engine Light Causes
The Chevy Silverado 2017 is eligible for monthly battery discounts from Hare Chevy. Hare Chevy can take care of everything, from complete battery replacement to labor cost reductions to massive discounts on battery components. Battery replacement coupons may be found here, and savings on elements can be found here, as well. For all your vehicle service requirements, our Chevrolet Silverado professionals are waiting to assist you. To talk with someone about our monthly savings or if you can’t find the battery you’re searching for on our website, please contact us at 3173336958 right away.
Why is My Check Engine Light On?
If your oxygen sensor isn’t functioning correctly, your car won’t be able to accurately assess the quantity of oxygen in the exhaust to ensure that the appropriate amount of fuel is delivered to the engine. This problem might cause your fuel efficiency to drop by as much as 40%.
2. Loose Gas Cap
If the gas cap is unsecured, leaking vapors might cause fuel sensors to be activated.
3. Faulty Catalytic Converter
The catalytic converter may be in need of replacement if there is an issue with the engine or exhaust system.
4. Faulty Ignition Coil
Coils deteriorate with time and under high temperatures, resulting in no spark being delivered to the engine.
5. Bad Spark Plug
If your engine is not able to fire on all cylinders due to a faulty spark plug, you might be squandering fuel.
6. Bad Mass Air Flow Sensor
In a similar way as the oxygen sensor, if this sensor is unable to accurately detect airflow, your mileage will be reduced.
7. Non-Compatible Aftermarket Alarm
It is possible that an aftermarket item in your engine system is causing your check engine light to illuminate.
8. Leaky Vacuum Hoses on EVAP System
The gasoline will evaporate before reaching its target if your suction hoses are leaking.
9. Faulty Exhaust Gas Recirculation Valve
If you do not have this part, the exhaust will not be able to return to the combustion process, resulting in a reduction in fuel economy.
10. Battery Charging System
Some battery monitoring systems can also identify problems with your battery and alert you by turning on your check engine light.
Schedule Auto Service
Is your vehicle’s check engine light illuminated? Please contact our sales staff as soon as possible to arrange a servicing appointment!
How To Connect Your iPhone to The 2019 Chevy Silverado
Is the check engine light illuminated on your vehicle’s dashboard? For more information, please call our sales team now to book an appointment.
- Make sure your vehicle is in park before starting the Bluetooth connecting procedure, as the process is inhibited when the vehicle is in motion. To utilize speech recognition, hit the Press to Talk button, then say “Pair phone” when the beep has finished. Choose “Phones” from the infotainment system’s menu screen after selecting the Phone symbol, and then “Pair device or search device” to add your smartphone. Select the name that appears on the infotainment screen in the Bluetooth settings on the phone
- And Make sure you follow the pairing guidelines
- When the pairing process is complete, the phone’s screen will be seen. Your phone book may also be downloaded automatically when the phone is paired with the system, although this will depend on the phone.
When driving, make sure your vehicle is in park because Bluetooth pairing is not possible when the vehicle is moving. After pressing the Press to Talk button and hearing the beep, say “Pair phone” to activate speech recognition technology. Choose “Phones” from the infotainment system’s menu screen after selecting the Phone symbol, and then “Pair device or search device” to connect your smartphone. Select the name that appears on the infotainment screen from the Bluetooth settings on the phone.
Your phone book may also be downloaded automatically when the phone is paired with the system, however this depends on the phone.
92 chevy 1500 crank but no start
I have a 1992 Chevrolet Silverado 1500 350 v8 5.7l that cranks but won’t start. I looked around the forum and other sites for an answer but couldn’t come up with any results. I had a decent battery and starter, and when I removed the air intake, I noticed a spray of gasoline squirting from the injectors, which led me to believe I had a good fuel pump and fuel filter, both of which I just changed. However, despite the addition of starting fluid, the vehicle would not start. It appears that my ignition is in fine working order because I checked for spark on spark plug1 and found spark, unless there is another way to check for ignition.
I believe my distributor is out of sync since I removed it to repair the oil pressure gauge, which was not producing reliable readings on the gauge when it was removed.
and how do I set the TDC on the dizzy so that it runs in sync with the engine?
It made a thumping sound when I tried to give it gas while it was beginning, so I gave up on trying to give it gas after hearing the thud sound.