Flashing Check Engine Light? (Professionals recommend)

A flashing CEL indicates a severe problem, one that requires immediate car repair. In other words, if your check engine light is flashing, pull over and call a tow service. Ultimately, an engine misfire is the most common cause of a flashing CEL.

Can I drive my car with the check engine light blinking?

The rule of thumb is that if the check engine light is flashing, you can’t keep driving the car. It’s an emergency. Often it indicates an engine misfire. If you keep driving, you will likely cause irreversible damage, mostly to the (expensive) catalytic converter.

What can cause check engine light to flash?

Common Reasons Why Your Check Engine Light is Flashing

  • Loose Fuel Cap.
  • Bad Catalytic Converter.
  • Faulty Airflow Sensor.
  • Spark Plugs Need Replaced.
  • Bad Oxygen (O2) Sensor.

Is a solid or flashing check engine light worse?

A flashing Check Engine Light is serious business. A solid Check Engine Light can mean something like a loose gas cap, or it can indicate a more in-depth problem like a fuel, timing, or transmission issue. Get your car diagnosed, although the urgency isn’t the same as if the light was flashing at you.

Can an engine misfire fix itself?

Engine misfires do not fix themselves unless they are external to the engine, they always return,Find the cause and fix it.. That depends on the nature of the misfire. An ignition misfire will generally not improve over time, once the misfire happens once it will continue to occur.

How much does it cost to fix an engine misfire?

Misfiring of a cylinder can happen for numerous reasons. Here are the most common causes and related costs of the misfire condition: Carbon or oil-fouled sparkplugs: $100 to $300 depending on cost of plugs and labor to replace.

Why is my car shaking and check engine light flashing?

Usually, when the check engine light is on and the car is shaking, that means you’re dealing with an engine misfire. An engine misfire—a problem that almost always causes an increase in hydrocarbon emissions —is one of the many reasons why the check engine light might illuminate (or start to flash).

Why is my car shaking and the engine light flashing?

The primary culprit that makes your check engine light blinking and car shaking is a malfunctioning cylinder. When the cylinder does not work as expected or it does not pass the fuel and air every time the crankshaft turns, it misfires. As a result, the engine runs rough and it makes the overall car shaking.

How do you fix an engine misfire?

Inspect the spark plugs for signs of damage. Use a spark plug socket to remove the plug so you can get a good look at it. The damage you see will help you determine the cause of the misfire. If the spark plug is just old, replacing it may solve the problem. Make sure to replace and properly gap new spark plugs.

Can AutoZone tell me why my engine light is on?

You can. All that you need to check your own light is an OBD-II reader, which can pull codes that help you find out what’s wrong with your car. If you don’t have a code reader, keep reading to learn the most common causes, and then bring your car to your local AutoZone to find out why your Check Engine Light is on.

How long can I drive with my check engine light on?

It’s okay to drive for a few miles, but be sure to schedule an inspection of the engine as soon as possible. If the check engine light comes on while you’re driving, don’t panic! Pay attention and see if the car is driving any differently than normal.

Will a bad alternator cause the check engine light to come on?

A faulty alternator not only turns the check engine light on, it also risks your safety. If the alternator fails when you’re driving, the car radio will go off, the interior lights will dim, and you will experience extreme difficulty in driving. The reason being all power is lost.

Can low oil cause misfire?

There is a relation between engine misfire and low oil pressure because the sudden drop of oil pressure can cause the engine not running right and the RPMs to drop low in gear causing an engine misfire.

What is the most common cause of a misfire?

The most common cause of an engine misfire when accelerating is worn-out spark plugs. When spark plugs are suffering from excessive wear, they don’t ignite the fuel in the piston cylinder when they are supposed to. This can also be caused by fouled spark plugs, a cracked distributor cap, or bad spark plug wires.

What are signs of a bad spark plug?

What are the signs your Spark Plugs are failing?

  • Engine has a rough idle. If your Spark Plugs are failing your engine will sound rough and jittery when running at idle.
  • Trouble starting. Car won’t start and you’re late for work… Flat battery?
  • Engine misfiring.
  • Engine surging.
  • High fuel consumption.
  • Lack of acceleration.

Check Engine Light Flashing: What You Need to Know

You may need to take your vehicle to a repair if these techniques do not completely eliminate the Check Engine Light. This is because there may be internal electrical problems.

What Are the Different Types of Engine Light Illuminations:

The presence of the check engine light indicates that there is a problem with your engine. The degree of the effect is determined by the way the light is lighting the subject. The check engine light can be illuminated in one of three ways: 1) while the engine is running, 2) when the engine is not running, and 3) when the engine is not running.

  1. An issue with your engine might be indicated by the check engine light on your dashboard. How well the light is lighting determines the strength of the effect. It is usual for the check engine light to glow in one of three ways: 1) when the engine is running, 2) when the vehicle is stopped, and 3) when the vehicle is stopped while driving.
  1. It is called a soft failure if the check engine light illuminates for a brief period of time before turning off on its own. Mild failure is related with a number of unique circumstances (e.g., if a wire is broken and keeps connecting and disconnecting, the check engine light will turn on and off accordingly.) Consider the following: the check engine light flashes and then goes off.
  1. Continuous flashing: If the check engine light is illuminated continually, it indicates that there is a problem with the vehicle. You must come to a complete stop and contact a towing service to transport the vehicle to a skilled repair as soon as possible.

What is An Engine Misfire?

The automobile engine is made up of a collection of cylinders in which the air and gasoline combine and ignite to produce the power needed to propel the vehicle forward. In the event that one or more cylinders were affected and were unable to function properly (for example, the car was unable to burn the gasoline, the air/fuel ratio was not exact, and so on), the check engine light will begin to illuminate. If you’re wondering why your check engine light is flashing, you’re not alone. It’s possible that there’s a misfire in the engine.

What are the Symptoms of Engine Misfire?

If the check engine light illuminates, you will immediately notice that the vehicle is not functioning as it should, particularly at higher RPMs when the vehicle becomes rough or jerky. The following are some of the signs that an engine is misfiring that you should be aware of:

  1. Engine Sound: One of the first things you’ll notice if your engine misfires is a strange sound coming from your engine. Engine jerkiness or hard driving may indicate that you should pull over and gather additional information in order to figure out what is going on. There are several serious conditions in which you may notice the check engine light blinking and the automobile sputtering.
  1. Your engine makes a strange sound when it misfires, which is one of the first things you will notice when your engine misfires. Engine jerkiness or hard driving may indicate that you should pull over and gather more information in order to figure out what’s wrong with your vehicle. It is possible to encounter check engine light flashing and automobile sputtering in some extreme conditions.
  1. Misfiring causes rough acceleration and idle, and you will notice this if your engine is misfiring. If your engine is misfiring, you will notice that it is difficult to accelerate or idle. As a result of several difficulties with the air/fuel combination, the car will not operate as it should at lower RMP. While you have this symptom, you may see things like the check engine light blinking when you accelerate
  1. Vehicle Shake: If one of your engine’s cylinders is not functioning properly, this will result in an unbalance in the engine’s behavior, and the unbalanced engine might cause the cabin to shake or tremble as a result of this. In this circumstance, the automobile is shaking due to the check engine light blinking.
  1. Reduced Vehicle Power: When the air/fuel combination does not have the proper air/fuel ratio, the automobile will be unable to accelerate and will only be able to reach 3,500 RPM at the most.
  1. Another indication of an engine misfire is difficulties starting the automobile, as well as black smoke pouring out of your tailpipe and a rotten egg stench emanating from your exhaust.

What are the Causes of Engine Misfire?

When your car’s engine misfires, it’s because there is something wrong with it. There are so many pieces in the engine that it would begin to malfunction if one of them failed. If this happened, the engine light would begin to flash. Some of these problems are discussed in further depth below, and other difficulties are noted at the bottom of this page. A list of the 20 most common reasons for a check engine light to illuminate is provided below.

  1. An Issue with the Oxygen Sensor: The oxygen sensor is in charge of detecting the amount of oxygen present in the exhaust gas stream. The oxygen level in the exhaust information is used to calculate the air/fuel ratio that must be utilized in the engine’s cylinder. Consider the consequences if there is a problem with this sensor: the engine will either have too much fuel or too much air than it requires.

There is a possibility that some fuel will leak out of the exhaust if the air/fuel combination has more fuel than is necessary. This can result in additional serious problems if there is too much fuel in the air/fuel mixture.

  1. Faulty Fuel Cap: You might be startled to learn that if your fuel cap is not properly closed, your engine light will come on and stay on. While it is possible that this is a minor issue caused by an open fuel cap, it is also possible that the gasoline cap has been damaged and has to be replaced.

In either case, engine misfire caused by a faulty fuel cap is a very inexpensive and simple problem to resolve. Attempting to close the gasoline cap tightly and driving the automobile for a short period of time will suffice in this situation. The problem is significantly more difficult if the check engine light continues to illuminate despite the fact that the gasoline cap has been closed. In this situation, you must immediately stop driving your vehicle and contact for towing.

  1. Catalytic Converter that is faulty or has failed. In the event that your check engine light is flashing, this is one of the worst circumstances that may occur.

It is the catalytic converter’s responsibility to convert the hazardous emissions from a combustion engine into less damaging gases before they are expelled via the exhaust of the vehicle. Immediately stop driving if you suspect that your car’s catalytic converter is malfunctioning and contact a towing service. You will most certainly discover that you have a very expensive engine repair (for example, a catalytic converter may cost between $500 and $1,000, and some automobiles have four of them).

It is possible that this sensor will fail due to a minor issue such as a filthy air filter.

A faulty mass air flow sensor, on the other hand, can have a substantial impact on your fuel efficiency, resulting in poor vehicle performance, as well as a harsh engine when accelerating.

If you have an engine misfire, you should send your car to a professional technician to get the MAF sensor repaired since it is more sophisticated than the other faults that are causing it.

  1. This sensor is in charge of determining how much fuel should be supplied to the air/fuel combination based on the amount of airflow it is receiving. Some minor issues such as a dirty air filter might cause this sensor to fail. It is not an urgency to repair a mass airflow sensor
  2. You may continue to drive your automobile while the problem is being resolved. An inoperable mass air flow sensor, on the other hand, can have a substantial impact on your fuel efficiency, resulting in poor automobile performance and a harsh engine when you are driving at high speeds. Because it is more intricate than the other faults that might cause an engine misfire, you must take your car to a professional technician in order to get your MAF sensor fixed.
  1. An ignition coil that has failed: The ignition coils are responsible for turning voltage into volts, which then forces the spark to ignite the air/fuel combination. An ignition coil that has failed: Having previously had malfunctioning ignition coils, it is suggested that you get your complete ignition system checked and/or replaced.
  1. There is a problem with the charging system: experts recommend that you check your engine’s battery on a regular basis to eliminate the need for a jump start for your automobile.
  1. Overheating of the engine: When the engine temperature rises over a certain threshold, it indicates that there are serious problems with the engine. Consequently, if you have proven that the driver is overheating, you must stop your vehicle and call for assistance.
  1. Cylinder Gasket Failure: This is another another big issue that you must do all in your power to prevent. A leaking cylinder head gasket can allow engine oil or coolant to seep into the cylinder and cause it to overheat. The occurrence of a full engine failure due to an oil or coolant leak into the cylinder is probable, and repairing it, if at all feasible, is extremely expensive.
  1. Reduced Compression: If there is a leak in the air/fuel mixture, the cylinders will not have enough pressure, and as a result, you may experience a shaky vehicle, low power, and very slow acceleration
  2. If there is a leak in the air/fuel mixture, you may experience a shaky vehicle, low power, and very slow acceleration
  1. Failure of the Piston Head: The failure of the piston head is another typical cause of engine misfire, which results in the blinking of the check engine light. The cost of repairing a piston head failure is quite high.

How Much Does It Cost to Fix Engine Misfire or Flashing Check Engine Light Issues?

While the cost of fixing engine misfire varies depending on the make, model, and year of your automobile, there are some common rates that can give you a general idea of the range of costs you might expect in your situation. Furthermore, the cost of repairing the engine misfire is dependent on the nature of the problem. You might either pay a small amount of money or pay extraordinarily big amounts of money. To repair a spark plug, for example, you will need to spend around one hour of effort in addition to the cost of the necessary components (usually cheap).

If, on the other hand, the problem with your engine is severe, the cost will be significantly more.

If the problem is with your car’s catalytic converter, the cost might reach thousands of dollars.

Engine Issue Estimated Price
Damaged or loose fuel cap $5.0
Oxygen sensor $150.0
Spark plugs or wires $100 – $200
Purge control valve $150
Purge solenoid $160
Ignition coil $220
Thermostat $250
Mass airflow sensor $250 – $450
Fuel injector $450

Bottom Line

The presence of a flashing check engine light indicates that there is a problem with your engine. If the indicator is only illuminated, the engine problem is not an emergency and will not likely cost a lot of money to repair. In contrast, if the sun is continually flashing, this indicates a serious engine problem, and you must pull over as soon as you can and have your vehicle towed to a skilled technician as soon as possible. Other symptoms associated with a flashing engine include a shaking or vibrating car, jerky engine sound, rotten egg smell coming from the tailpipe, white or blue smoke coming from the exhaust, and a variety of other signs and symptoms.

See also:  Car Won’t shift out of park? (Solution)

One option is to get a tool that will explain to you what this code means, or you could just ask a professional technician who is knowledgeable about cars to explain it to you.

Depending on the situation, the cost might range from a handful of dollars to several thousand dollars.

Check Engine Light Flashing? (Here’s What To Do)

After a few miles on the road, your check engine light appears on your dashboard seemingly out of nowhere and begins flashing. What should I do now? Is it possible that my automobile may be harmed if I keep driving it? How much will it set you back? There might be a slew of questions racing through your mind at the moment. Fortunately, in this post, we will go over all you need to know about a flashing or blinking check engine light on your vehicle. Let’s get this party started!

What Does A Flashing Check Engine Light Mean?

A flashing check engine light indicates that there is an emergency and that the vehicle must be repaired immediately. The longer you continue to drive with a flashing check engine light on, the more harm you may do to your engine and transmission. It is frequently caused by a misfire that occurs as a result of fuel or spark difficulties. While you are driving, the engine control unit analyzes all of the sensors in your vehicle and uses this information to determine how much fuel should be fed into the engine and at what angle the ignition should be turned on.

It is possible that the engine control unit will get the incorrect number from the sensor numerous times, resulting in an illuminated check engine light on your dashboard.

If the condition is serious due to a misfire, the check engine light will begin to flash instead of the warning light. This is to inform you that an issue is currently occurring that has the potential to destroy the catalytic converter.

Causes of a Flashing or Blinking Check Engine Light

  • Misfires on one or more cylinders (this is the most common occurrence)
  • Faulty spark plugs/coils
  • Faulty engine sensors (coolant temperature, air temperature, exhaust temperature sensor, and so on)
  • Faulty spark plugs/coils EGR valve that is not working properly
  • Injectors that are not working properly
  • Crankshaft/camshaft sensor that is not working properly
  • Issues with exhaust emissions
  • Problems with boosting and overcharging
  • Internal engine failure (this is extremely unusual)
  • EVAP diagnostic problem codes

Misfires are the most common cause of a check engine light that is flashing or blinking. However, it is not as straightforward as that because a variety of factors might contribute to misfires. RELATED: Is it possible for the Check Engine Light to reset itself?

How to Diagnose a flashing check engine light?

In order to locate the problem now that we understand what may be causing it, where should we begin? You must realize that every time your check engine light is on or blinks continuously, the computer will record a trouble code in the memory so that you can determine what was causing the problem. As a result, it is a horrible practice to just assume which parts could be causing the check engine light to illuminate and then proceed to replace them. This will nearly always result in a waste of your money, as it has in the past.

  • This may be accomplished with the use of a diagnostic scanner.
  • The most common fault code you may encounter after receiving the engine control unit’s codes is one connected to a misfire.
  • In the case of a misfire trouble code and an ignition coil issue code, you should absolutely continue troubleshooting on the ignition coil that caused the misfire.
  • If you are experiencing misfires on a number of cylinders, it is most likely due to a mixture that is either too lean or too rich.

What to do When Your Check Engine Light Is Blinking?

In the event that your check engine light is blinking, what should you do? We’ve all been there at one point or another: the check engine light illuminates, and you wonder aloud whether you should be concerned. The answer is, without a doubt, affirmative. A flashing light The check engine light should not be disregarded, and by addressing it as soon as possible, you may be able to save yourself a great deal of time and effort in the long run. Continue reading to learn more about why check engine lights illuminate, as well as some of the reasons and symptoms of an engine misfire.

  • Many individuals are tempted to disregard the check engine light, but the fact is that you should seek quick assistance if the signal is illuminated.
  • There is also the possibility that irreparable damage to components of the emissions system, such as oxygen sensors, will occur.
  • The flashing of the check engine light can indicate a variety of critical issues, but the most typical reason for it to illuminate is a misfire in the engine.
  • One of the numerous possible causes of an engine misfire is that the engine is overheating.
  • An engine misfire may occur if a cylinder is no longer producing power to the engine’s pistons.
  • Spark plugs and ignition coils are frequently subjected to routine maintenance and replacement, and if your check engine light is flashing, it is possible that this is the source of the problem.
  • For example, if there is too much air in the cylinder, an imbalance in the mixture can cause delayed acceleration or backfiring; if there is too much fuel, an imbalance in the mixture can cause overheating and jerky running.
  • Compression is low: In your cylinders, the proper fuel combination will generate the necessary amount of pressure, and if there is a leak of either air or fuel, the consequence will be a loss of this pressure.
  • Losses in pressure might be caused by leaks in the head gasket, piston holes, or valves or timing belts that are not functioning properly.

Symptoms of a Misfiring Engine In the event that you’re confused whether or not your engine is misfiring, there are a few warning indicators that you should check for. Keep a watch out for the signs and symptoms listed below:

  • In many cases, shaking or vibrations in the automobile indicate that the cylinders are not firing properly. If you notice vibrations in the car while driving or idling, take note of it
  • A stumbling or uneven acceleration may also be an indication of misfiring cylinders, so if your engine is stumbling or speeding up in an inconsistent manner, it’s time to take it in for a checkup.
  • Your engine may potentially be misfiring, which is usually caused by an incorrect air-to-fuel ratio. If you are experiencing power loss, contact a qualified mechanic.
  • If you hear unusual sounds emanating from your engine, this might also be an indicator that something is amiss and that you are driving with less power than you should be.
  • In addition, the smell of gas is a major indicator that something is wrong with your engine, and it might suggest a leak or damage to one of the cylinders.

We’ll take care of that blinking engine light for you. You may get in touch with us at Fred’s Auto Repair if you’re seeking for a reputable auto-repair business to examine your check engine light. The service you receive from our expert technicians will be of the highest quality, and we even have relationships with local companies to help you pass the time while we’re maintaining your vehicle. Make an appointment with us today and allow us to assist you with all of your automobile maintenance requirements!

Diagnose a Flashing Check Engine Light in Your Acura at the Best Garage in Marlborough

Many drivers have experienced the unexpected, and in some cases scary, moment when their check engine light begins to flicker on their dashboard. If this has never happened to you before, the most essential thing to remember is that any flashing light on your dashboard indicates the presence of an emergency situation. This is in contrast to a continuously lighted check engine light, which indicates that you will need to get your vehicle repaired soon. A rule of thumb is to pull over and have your car towed to your mechanic as soon as your check engine light starts flashing, since it may not be safe to continue driving.

Your Catalytic Converter

The most expensive repair that may result from a malfunctioning catalytic converter is the one that is most difficult to diagnose and repair. This can be caused by a variety of issues, including electrical problems, problems with your fuel injection system, or even a malfunctioning oxygen sensor. You don’t want to take any risks if the problem is with your catalytic converter, regardless of the reason. The fact that continuing to drive yourAcuramay cause the converter to fail completely is one of the reasons why it’s so important to get to a mechanic as soon as possible.

Common Causes of an Engine Misfire

After everything is said and done, an engine misfire is the most prevalent reason of the flashing check engine light. This might be the outcome of a variety of factors. An engine misfire happens when one or more of your Acura’s cylinders have failed, resulting in the engine no longer being able to produce enough power to operate properly. In order for your car to work, all of its cylinders must be firing at the same time. This means that a single blown cylinder can cause serious damage to your engine or impair the performance of your vehicle, as well as trigger the flashing check engine light.

An excessive amount of air in the mixture will result in sluggish acceleration or backfiring, whereas an excessive amount of fuel in the mixture will result in overheating and jerking while driving, in addition to the illumination of the check engine light.

If your spark plugs have been burned, or if your ignition coils have been fractured or otherwise damaged, you may notice that your car’s performance has been reduced, in addition to the check engine light blinking on the dashboard.

When there is a problem with the compression in an Acura, the check engine light may blink, the engine may have poor power, the cabin may shake, and the vehicle may accelerate slowly.

It’s possible that your Acura is suffering difficulties ranging from a poor gasket to a hole in the piston to a damaged timing belt, all of which would require replacement by your technician.

Diagnosing and Repairing Check Engine Light Issues

In the end, the most typical reason for a flashing check engine light is a misfire within the engine. Multiple issues might be at the root of this. In your Acura, an engine misfire happens when one or more of the cylinders have failed, which indicates that the engine is no longer receiving enough power. To function properly, your car requires that each and every one of its cylinders fire simultaneously. A single blown cylinder may do serious damage to your engine and degrade the overall performance of your vehicle, as well as illuminate the check engine light on your dashboard.

Your Acura may experience sluggish acceleration or backfiring if the mixture contains too much air, whereas an excessively rich mixture can cause overheating and jerking while driving, as well as the illumination of the check engine light (see illustration).

If your spark plugs have been burned, or if your ignition coils have been broken or otherwise damaged, you may notice that your car’s performance has been reduced, in addition to the check engine light flickering on and off repeatedly.

While driving an Acura, you may notice the check engine light blinking, poor power, cabin shaking, and sluggish acceleration.

  • Plugs, coils, or wires for the ignition, oxygen sensor, fuel filter, or injector, head gasket, or EGR valve
  • A problem with your electrical system

Professional Automotive has been in business for more than 22 years, providing a comprehensive variety of repair and maintenance services. Our ASE-certified experts are up to date on all of the newest diagnostic and repair technologies and have years of expertise. Also included is a no-hassle, 24-month/ 24,000-mile warranty on all of the company’s services. Your car will always be in the greatest possible condition, no matter where you go.

Diagnosing Check Engine Lights & Misfires

When it comes to dashboard lights that illuminate unexpectedly, consumers are frequently unsure of what they require or whether their car requires quick repair. In particular, when it comes to the check engine light, this is true of all vehicles. Unlike a check engine light that is illuminated but not flashing, a flashing check engine light signals that there is a problem with the vehicle’s electrical system. When the check engine light remains illuminated, it indicates that the vehicle is safe to use.

What do you do?

While driving, the flashing light indicates that other components of the car may be damaged. One such component is the catalytic converter, which is one of the most important parts of the vehicle that might be damaged.

Diagnosing an Engine Misfire

In the event that a vehicle with a flashing check engine light arrives in your shop, employing a scan tool to determine what’s wrong is a smart place to start the diagnosis process. Consider the following scenario: the scan reveals a DTC P0301 code, for example. Cylinder No. 1 is misfiring, as indicated by the presence of this symbol. Check the spark plugs to see whether they are faulty from here; however, they appear to be in fine working order thus you should not worry about that. Due to the fact that the coils are not engaged, you might swap the cylinder one coil for the cylinder two coil and restart the car.

  • 2, this indicates that there was a defective coil over plug in the first place.
  • It is occasionally necessary to do further diagnostics in order to determine the reason of a misfire.
  • It is frequently dependent on the mileage of the car and the condition of the spark plugs.
  • 1 coil to get the vehicle back up and running.
  • The Aftermarket Auto Parts Alliance has provided sponsorship for this article.

A Blinking Engine Light Means NOW

If you’re like the majority of drivers, you’ve probably experienced the terrifying moment when you’re presented with a blinking engine light on your dashboard. Many individuals are aware that “blinking” indicates a “emergency,” and they take their automobiles into the shop as soon as possible. Others may hesitate to have the light inspected for a variety of reasons, including a lack of time to bring their vehicle in or a belief that they cannot afford an expensive repair. This essay will explain why it is never a good idea to drive your car while the service light is illuminated on the dashboard.

  1. Typically, you will be able to detect a significant change in the way your car operates.
  2. In order to properly diagnose and repair the car, it should be hauled to a reputable repair shop.
  3. The cost of replacing a catalytic converter might vary greatly depending on the kind and age of the car you drive, so shop around.
  4. Additionally, many of the cars we use in the Puget Sound are manufactured to comply with California Emissions Standards, which should be taken into consideration.
  5. CA emissions regulations are significantly stricter than federal regulations, and if you do not replace the damaged part with the right part, the vehicle’s computer will not be able to communicate with the calibration for the emissions system.
  6. DEQ will not allow your vehicle to pass if your light is on, or if there are any current codes recorded in the computer of your car.
  7. Because California has stricter environmental regulations, the positive is that your car will operate much more efficiently and cleanly for our environment.
  8. In order to notify you when there is a problem with your car so that you may take it in for service, the service light is illuminated.

The causes for this might range from simple and affordable tweaks to large and expensive restorations. A blinking engine light can be caused by a variety of factors, the most prevalent of which are as follows:

  • The ignition coil has failed, as well as the fuel injector. The computer in the engine has failed. Bad engine valves
  • A faulty spark plug
  • A faulty spark plug wire
See also:  Anti-seize on spark plug threads? (Solution)

The ignition coil has failed, as has the fuel injector. There has been a failure of the engine computer. Bad engine valves; faulty spark plug; faulty spark plug wire

Ford Check Engine Light

Please wait for the page to load completely.

What Does the Check Engine Light Mean?

The check engine light on your Ford is one of the most frequently misinterpreted lights or indications on the vehicle. The check engine light is a feature of the onboard diagnostics system, and it can be shown in a variety of ways depending on the vehicle. An engine symbol, a message such as “Check Engine,” or a mix of the two are all possible with a check engine sign. Depending on the color of the light, it will either be amber or red. It is a component of the diagnostics system present in your car.

Some of these tasks include adjusting the ignition timing of an automatic gearbox, managing the engine speed, and applying stability control, to mention a few examples.

It might be anything as easy as your gas cap being loose, or something as catastrophic as your engine knocking out of whack.

Our Fordservice department can assist you in determining which code is causing your check engine light to illuminate or in diagnosing the cause of your check engine light blinking.

How many miles can you drive with the check engine light?

If your check engine light is on and flashing, we recommend that you pull over and contact Coggin Ford Jacksonville for assistance in determining if your vehicle is safe to drive in or whether a tow truck is required. It is impossible to forecast how many miles you will be able to drive with the warning light illuminated because each check engine code has a different severity level. Attempting to comprehend the code and then planning your approach appropriately is the most prudent course of action.

What could cause the check engine light to come on in a Ford?

Your gas cap might be loose or need to be replaced if your check engine light turns on. If this is the case, tightening or replacing your gas cap could solve the problem. On the other hand, your vehicle’s check engine light might also be an indication of a significant malfunction that could cause serious damage to your engine and result in a large repair expense. The check engine light will either glow or blink depending on your vehicle’s make and model. A constant glow normally signals something less serious, however a flashing check engine light indicates that your vehicle’s engine is in significant condition and that quick assistance is required to fix the problem.

If your Ford’s check engine light is on and flashing, we strongly advise you not to drive the vehicle and to book Ford servicing as soon as possible. The following is a list of the most typical reasons why your check engine light may illuminate:

  • Your catalytic converter has failed or is about to fail. This component of your Ford’s exhaust system is called a catalytic converter. One of the functions of the catalytic converter is to convert the carbon monoxide produced during the combustion process into carbon dioxide. In most cases, neglecting maintenance results in a broken catalytic converter, which is why Coggin Ford Jacksonville includes a comprehensive multi-point check with every Ford service. The failure of your catalytic converter will result in your Ford failing an emissions test, exhibiting poor engine performance, and resulting in reduced fuel efficiency if the problem is not addressed. Your car may also operate at a higher temperature, which can lead to other problems as a result of overheating
  • In this case, your mass airflow sensor (also known as MAF) will need to be changed. The mass airflow sensor in your Ford is responsible for determining how much fuel is required to run your engine effectively. It does this by measuring the amount of air that enters the engine. The mass airflow sensor, which is a component of the engine management system, assists the engine in responding to certain changes, such as altitude. In the case of a faulty mass airflow sensor, your Ford may have difficulty starting, idling poorly, or experiencing a sudden shift in the position of the throttle pedal
  • When your Ford gas cap is loose, broken, or missing, one of the most typical and frequent causes is that it is leaking. The gas cap on your Ford is useful for a variety of reasons. In addition to preventing gas fumes from being emitted when you are not driving, it also helps to maintain pressure within the fuel tank by securing the fuel system. What happens if you have a faulty gasoline cap on your vehicle? If your gas cap is old or has a burst seal, you may lose gasoline through evaporation, which will result in more trips to the gas station and more money spent. Fortunately, replacing a gas cap is not a difficult task. If your Ford’s check engine light comes on shortly after you fill up the tank with petrol, the first thing you should check is to ensure that the cap isn’t loose — or that it’s still on the car’s roof or at the fuel pump
  • So, what happens if you don’t replace your O2 sensor? A defective sensor can not only reduce your miles per gallon, but it can also cause damage to your catalytic converter and the spark plugs in your Ford’s engine as well. The oxygen sensor gives data to the vehicle’s onboard computer, which then selects the most appropriate mixture of air and fuel to be introduced into the engine’s cylinders. A faulty oxygen sensor can also cause a car to fail an emissions test
  • Problems with aftermarket parts are also common. If an aftermarket alarm, exhaust, or other alternative component is not fitted correctly, it might do serious damage to your Ford. These aftermarket components and accessories have the potential to deplete the battery, cause the check engine light to illuminate, or even prevent the vehicle from starting. If these problems seem familiar, bring your vehicle to Ford and let our team of qualified mechanics check to be sure your aftermarket parts were fitted correctly and aren’t the source of each problem. Getting accessories, particularly aftermarket parts and accessories, or utilizing OEM components in the first place may cost a minuscule amount more, but it may save you money in the long run by avoiding the expense of needing to have shoddy work and damage caused by poor installation work repaired. The battery is low on charge or completely dead. Your Ford’s battery is easily accessible from any location. Your car won’t start, it won’t illuminate the road ahead, it won’t play the radio, and it won’t charge your phone if it doesn’t have a battery. Car batteries today last far longer than they did a few decades ago, and they require little to no maintenance. It is dependent on the model of Ford you drive, however you may save money by taking advantage of our current service discounts and promotions. There is a vacuum leak in your Ford. Every Ford is equipped with a vacuum system that is capable of performing a wide range of tasks. The vacuum system also contributes to the reduction of hazardous emissions by directing fumes away from the engine when fuel evaporates through it. Whether your engine’s RPM is high at idle or surges at random, a vacuum leak might be the source of the problem. When exposed to high heat or cold, vacuum hoses can dry up and fracture over time
  • This is especially true if the hoses are used often. Having new Spark Plugs or Plug Wires installed in your Ford is mandatory. The spark plugs in your car’s engine are the components that ignite the mixture of air and fuel in the combustion chamber of the vehicle. This explosion is responsible for the movement of the pistons and the operation of the engine. The spark plug wires are responsible for delivering the spark from the ignition coil to the spark plugs in the engine. If your spark plugs or spark plug wires are damaged or old, you may notice a reduction in performance and increased power consumption. Occasionally, your engine will have difficulty starting or continuing to operate in certain severe circumstances. A blocked catalytic converter or damage to ignition coils and oxygen sensors can result from worn spark plugs and plug wires, requiring everything from simple to complex repairs. Your O2 Sensor (Oxygen Sensor) will need to be replaced. The Oxygen Sensor, often known as the O2 sensor, is responsible for measuring the quantity of oxygen present in your exhaust. Excess oxygen in your exhaust system causes fuel to burn more quickly, resulting in a less efficient vehicle when it comes to fuel efficiency.

Is it safe to drive your Ford with the check engine light on?

This is a difficult subject to answer because everything is dependent on the severity of the problem. If the problem is a small one, such as a loose gas cap, you should be able to continue driving without incident. This is suggested by a possible glow of the check engine light that is on all of the time. A change in the way the automobile performs might be a sign of a more serious problem with the vehicle. If your Ford’s check engine light is on and flashing, this indicates that there is a serious problem with the vehicle, and it is suggested that you have it serviced right away.

Alternatively, slow down and bring your Ford to one of our experienced specialists as soon as it is possible.

Ford Check Engine Light Flashing

We know from years of offering Check Engine Light Diagnosis Service that there are several typical explanations for an illuminated Check Engine Light, including something as simple as a loose gas cap, despite the fact that there are several probable causes. To mention a few of the other typical causes for the Check Engine Light to come on, there are defective head gaskets, defective emissions control parts, a filthy mass airflow sensor, a broken oxygen sensor, a glitch with the fuel injection system, and defective spark plugs.

  • When this occurs, the Check Engine Light is turned off, and you may walk out of the repair shop certain that your Ford problem has been resolved.
  • In order for the sensors to continuously monitor situations, they must also communicate data to the electronic control unit.
  • However, this is the limitation of the Check Engine Light – it will not tell you what is wrong with your vehicle or what you need do to fix it.
  • Contact us now to learn more.

Will the check engine light reset itself?

When the problem or code that caused the check engine light to illuminate is resolved, the check engine light on your Ford will normally turn off by itself. For example, if a loose gas cap was the reason of your check engine light going on, once the cap is tightened, the light will turn off by itself within a few minutes. Similarly, if your catalytic converter is failing and you’ve been doing a lot of stop-and-go driving, the check engine light may have come on as a result of the large amount of time the converter has been put through its paces.

In the majority of situations, your Ford light will turn off after around 20 to 40 miles. If you drive more than that amount and the light remains on, you will need to bring the vehicle into Coggin Ford Jacksonville so that the light and code can be verified and the vehicle may be restarted.

How much does it cost to get the engine light checked?

The typical cost of a check engine light diagnostic and testing is between $88 and $111, depending on the location. The good news is that Coggin Ford Jacksonville provides comprehensive multi-point inspections as well as free diagnostics in the majority of situations to assist you in determining the source of your check engine light. The check engine light can indicate a variety of problems, from a loose gas cap to a more odd failure such as a faulty catalytic converter or a problem with one of the car’s oxygen sensors.

Check Engine Light Service Ford

What do you do when you’re traveling down the road in your Ford and a yellow light appears on your dashboard, indicating that the engine needs to be checked? Your heart falls a little, if you’re like the majority of Ford owners, since you have no idea what that light is trying to tell you or how you should respond. Stress can be exacerbated by apprehension about the unknown (or the potential expense of the unknown). But take a deep breath and understand that just because the light is on doesn’t mean you have to pull over to the side of the road and summon a tow truck, it is highly advised that you have your Ford examined as soon as you can.

A computer activates your check engine light when your Ford’s ECM (electronic control module), which is the vehicle’s onboard computer, detects a fault in the electronic control system that it is unable to rectify.

This code is scanned by our Ford vehicle repair experts at Coggin Ford Jacksonville using an electronic scan instrument, which they use to diagnose the problem.

While this code will inform you of the problem that has been found, a true diagnostic will still need the services of a qualified expert to establish the problem and correct it.

Ford Check Engine Light

A flashing light signifies that the situation is dangerous, and that if it is not addressed immediately, it might result in extensive damage to the vehicle. If the check engine light on your Ford begins to illuminate, it indicates that a problem exists that requires immediate care, and your Ford should be taken in as soon as possible. An engine misfire that causes unburned gasoline to be spilled into the exhaust system is generally the cause of this blinking light being activated. There, it can quickly raise the temperature of the catalytic converter to a point where damage is inevitable, necessitating the need for a costly replacement converter.

This is a strong possibility as a contributing factor.

Immediately contact our team of automotive professionals at Coggin Ford Jacksonville by dialing 9047478996 if your check engine light is on or if you have any other questions.

It is possible that if the problem is not addressed or if you continue to drive, the problem can extend to the spark plug wires, catalytic converter, or ignition coils, resulting in an extremely expensive repair.

Ford Check Engine Light Codes

When the check engine light shines on your vehicle’s dashboard, it may be rather frightening to see that small light suddenly illuminate, but in truth, it is not anything that should drive you to shut down in panic right immediately. If you hear the phrase diagnostic trouble codes (DTC), this is simply another name for the codes that appear on your dashboard when your engine is running. These are automotive computer codes that are saved by the engine control module (ECM), commonly known as the OBD (on-board computer diagnostic system) in your vehicle.

The fact is that, while it may seem intimidating at first, learning how to do simple diagnostics can provide you with valuable information about your car as well as allow the Check Engine Light to do what it was intended to do: serve as a guide.

Because there are hundreds of different OBD codes, there are also hundreds of conceivable causes for the indicator to be illuminated, including the following:

  • Transmission problems
  • Problems with the emissions controls
  • Problems with the ignition system Difficulties with the gas cap (either loose or missing)
  • Problems with the fuel and air metering systems
  • Problems with the computer’s output circuit
  • Spark plugs that are not working properly
  • Battery that has seen better days
  • Sensor for oxygen

This is why it is critical for someone who does not have a great deal of automotive expertise to refrain from making assumptions about what a code indicates. If the engine light turns on as a result of a serious problem, you run the danger of further harming your vehicle if you do not address the problem immediately. For more information, call Coggin Ford Jacksonville at 9047478996 or book your check engine light service online now! When your vehicle’s check engine light illuminates, you should have it checked out by a skilled Ford repair as soon as possible.

See also:  ABS wiring harness repair?

Acura Check Engine Light

Please wait for the page to load completely.

Acura Check Engine Light Flashing

We know from years of offering Check Engine Light Diagnosis Service that there are a few frequent factors, including something as simple as a loosened gas cap, that an illuminated Check Engine Light may be caused by. Furthermore, there are several other possible causes for an illuminated Check Engine Light, including a malfunctioning emissions control part, a damaged oxygen sensor, a malfunction with the fuel injection system, a bad head gasket, a filthy mass airflow sensor, and defective spark plugs, to mention a few.

When this occurs, the Check Engine Light is turned off, and you may walk out of the repair shop certain that your Acura problem has been resolved.

The sensors are constantly sensing situations and transmitting data to the electronic control unit, which is always changing.

However, that is the limitation of the Check Engine Light – it will not tell you exactly what is wrong with your vehicle or what you need do to fix it.

Then we come in; Crown Acura Richmond offers a Check Engine Light Diagnosis Service that pinpoints the source of the problem and provides you with an advice on what to do next from a Highly Qualified Service specialist.

Acura Check Engine Light

If the check engine light on your Acura begins to blink, it indicates that there is an issue that requires immediate care, and your Acura should be brought in as soon as possible. A blinking light indicates that there is an issue with the vehicle, and if it is not addressed soon, it might cause significant damage to the vehicle. A persistent engine misfire, which allows unburned gasoline to be spilled into the exhaust system, is often indicated by this flashing indicator light. There, it has the potential to instantly raise the temperature of the catalytic converter to a degree where damage is probable, necessitating a time-consuming and expensive repair.

This has the potential to be the root of the problem.

It is possible that if the problem is not addressed or if you continue driving, it can spread to the spark plug wires, catalytic converter, or ignition coils, resulting in a very expensive repair.

How much does it cost to get the engine light checked?

When it comes to check engine light diagnosis testing, the usual cost is frequently between $88 and $111 on a regular basis. The good news is that Crown Acura Richmond provides comprehensive multi-point checkups as well as free diagnostics in the majority of situations to assist in determining the source of your check engine light. A malfunctioning gas cap, for example, can cause the check engine light to illuminate. A more severe failure, such as a bad catalytic converter or a problem with one of the car’s oxygen sensors, can cause the light to illuminate.

Is it safe to drive your Acura with the check engine light on?

If your Acura’s check engine light is on and flashing, this indicates that there is a major problem with the vehicle, and it is suggested that you have it serviced as soon as possible. This is a difficult subject to answer because everything is dependent on the severity of the problem. As long as the source of the problem is a small one, such as a loose gas cap, the vehicle should be safe to drive. The check engine light will generally illuminate in a consistent manner to indicate this. The performance of your car may have changed, which might be an indicator of a more serious problem with the vehicle.

Alternative: Slow down and bring your Acura as soon as you can to one of our qualified experts for service.

What Does the Check Engine Light Mean?

The check engine light on your Acura is one of the most frequently misinterpreted lights or indications on the vehicle. The check engine light is a component of the onboard diagnostics system, and it can appear in a variety of different configurations. An engine symbol, a message such as “Check Engine,” or a mix of the two are all possible with a check engine sign. Depending on the color of the light, it will either be amber or red. It is a component of the diagnostics system present in your car.

Some of these tasks include adjusting the ignition timing of an automatic gearbox, managing the engine speed, and applying stability control, to mention a few examples.

It might be as obvious as a gas cap that has come free or as subtle as an engine that has started banging.

Our Acuraservice department can assist you in determining which code is causing your check engine light to illuminate, as well as inspecting the reason for the flashing of your check engine light. Make contact with Crown Acura Richmond right away!

How many miles can you drive with the check engine light?

Because each check engine code has a different level of severity, it is impossible to forecast how many miles you will be able to go to work while the warning light is illuminated. Attempting to comprehend the code and then planning your approach appropriately is the most prudent course of action. If your check engine light is on and flashing, we recommend that you pull over and call Crown Acura Richmond for assistance in determining if your car is safe to drive to work in or whether a tow truck is necessary.

Acura Check Engine Light Codes

When the check engine light shines on your vehicle’s dashboard, it may be rather frightening to see that small light suddenly illuminate, but in truth, it is not anything that should drive you to shut down in panic right immediately. If you hear the phrase diagnostic trouble codes (DTC), this is simply another name for the codes that appear on your dashboard when your engine is running. In your vehicle, these are automotive computer codes that are kept by the ECM, which is also known as the OBD (on-board computer diagnostic system).

With a little time and perseverance, confronting major diagnostics will provide you with accessible knowledge about your car and will also let the Check Engine Light to perform what it was intended to do all along: serve as a guide.

Because there are hundreds of possible OBD codes, there are also hundreds of possible causes for the light to come on, including the following:

  • Transmission troubles
  • Problems with the fuel and air metering systems
  • Problems with the computer’s output circuit
  • A gas cap that is loose or missing
  • Problems with the emissions control system
  • Faults with the ignition system
  • Battery that has seen better days
  • Bad spark plugs
  • Faulty oxygen sensor

This is why it is important for someone who does not have extensive automotive expertise to refrain from making assumptions about what a code indicates. Make a call to Crown Acura Richmond at 8043618447 or book your check engine light service online right now! When your check engine light illuminates, you should have it checked out by a trained Acura repair as soon as possible. If the engine light turns on as a result of a potentially dangerous situation, you run the risk of further harming your vehicle if you do not address the problem immediately.

Check Engine Light Service Acura

You’re traveling down the road in your Acura when suddenly a yellow light on your dashboard illuminates, indicating that you should “Check Engine” your vehicle. If you’re like the majority of Acura owners, your heart falls a little bit since you have no idea what that light is trying to tell you or how you should react to the situation. Stress can be exacerbated by apprehension about the unknown (or the potential expense of the unknown). Rather, take a big breath and remember that the light turning on does not always mean you need to pull over to the side of the road and contact a tow truck; however, it is advised that you get your Acura examined as soon as possible after the light comes on.

A computer activates your check engine light when your Acura’s ECM (electronic control module), which is the vehicle’s onboard computer, detects a problem in the electronic control system that it cannot resolve.

Using an electronic scan instrument, our Acura car repair specialists at Crown Acura Richmond can determine what code is being shown on the screen.

While this code will inform you of the problem that has been found, a true diagnosis will still need the assistance of an expert technician to identify and resolve the problem.

Will the check engine light reset itself?

If the problem or code that caused the check engine light to illuminate on your Acura is resolved, it is typical for the light to turn off on its own. For example, if a loose gas cap was the reason of your check engine light going on, once the cap is tightened, the light will turn off by itself within a few minutes. In the same way, if your catalytic converter is performing optimally and you’ve been doing a lot of stop-and-go driving, it’s possible that the check engine light has come on as a result of the excessive consumption of the converter.

if you drive more than that amount and the light remains on, you will need to transfer your vehicle to Crown Acura Richmond so that the light and code may be verified and reset properly.

What could cause the check engine light to come on in a Acura?

Depending on the cause of your check engine light, it might be as simple as tightening or replacing your gas cap. Similar to how a malfunctioning check engine light may signal the presence of an ongoing issue with your engine, which might result in extensive damage to your engine and a high repair price. The check engine light will either glow or blink depending on your vehicle’s make and model. A convincing glow that occurs on a regular basis implies something less persistent, however a flashing check engine light signals that your vehicle’s engine is experiencing persistent difficulty and that assistance is required immediately.

The following is a list of the most common causes for your check engine light to illuminate:

  • The mass airflow sensor (also known as the MAF) in your vehicle has to be changed. The mass airflow sensor in your Acura is responsible for determining how much fuel is required to operate your engine effectively. It does this by monitoring the amount of air entering the engine. The mass airflow sensor, which is a component of the engine management system, aids in the adaptation to actual changes, such as altitude. The failure of the mass airflow sensor in your Acura, as well as problems starting, idling, and changing the position of the throttle pedal, might indicate a problem with the vehicle’s mass airflow sensor
  • Problems with any aftermarket accessories. If an aftermarket alarm, exhaust, or other alternative component is not properly fitted, it might cause serious damage to your Acura vehicle. These aftermarket components and accessories have the potential to deplete the battery, cause the check engine light to illuminate, or even prevent the car from starting altogether. Please bring your vehicle into Acura so that our team of qualified mechanics can verify that your aftermarket components were fitted appropriately and are not creating any problems. Getting accessories, highly aftermarket components and accessories, or utilizing OEM parts in the earliest possible time may cost a little more money, but it may save you money in the long run by avoiding the expense of needing to have faulty work and damage caused by poor installation work fixed. New Spark Plugs or Plug Wires are a must-have for every Acura vehicle. The spark plugs in your vehicle’s engine are the components that ignite the air/fuel combination in the combustion chamber of the vehicle’s engine. This explosion is responsible for the movement of the pistons and the operation of the engine. The spark plug wires are responsible for delivering the spark from the ignition coil to the spark plugs in the engine. It is possible to have poor performance and lower power if your spark plugs or spark plug wires are faulty or broken. Occasionally, your engine will have difficulty starting or continuing to operate in certain severe circumstances. A blocked catalytic converter, as well as damage to ignition coils and oxygen sensors, might result in more expensive repairs as a result of worn spark plugs and plug wires
  • The battery is low on charge or completely dead. The battery in your Acura is the size of a mountain. Your car won’t start, it won’t illuminate the road ahead, it won’t play the radio, and it won’t charge your phone if it doesn’t have a battery. Car batteries today last far longer than they did a few decades ago, and they require little to no maintenance. The cost of a new one varies depending on the model of Acura you drive, but you may save money by taking advantage of our current service discounts and promotions. Your catalytic converter has failed or is about to fail. Acura’s exhaust system includes a catalytic converter, which is a component of the system. One of the functions of the catalytic converter is to convert the carbon monoxide produced during the combustion process into carbon dioxide. In most cases, missed maintenance results in a broken catalytic converter, which is why Crown Acura Richmond includes a comprehensive multi-point examination with every Acura service. If you have a problem with your catalytic converter and don’t get it fixed, your Acura will fail an emissions test, exhibit poor engine performance, and have a negative impact on your fuel efficiency, among other things. A greater temperature may be reached by your vehicle, which may result in additional difficulties as a result of overheating
  • Your O2 Sensor (Oxygen Sensor) may need to be replaced. The oxygen sensor, often known as the O2 sensor, is responsible for measuring the quantity of oxygen present in your exhaust system. The presence of extra oxygen in your exhaust system causes gasoline to burn more quickly and your car to be less efficient when it comes to achieving maximum fuel efficiency. As a result, what will happen if I do not replace your oxygen sensor? A defective sensor can not only reduce your miles per gallon, but it can also cause damage to your catalytic converter and the spark plugs in your Acura TL as well as other components. The oxygen sensor transmits data to the vehicle’s onboard computer, which uses the information to determine the optimal mixture of air and fuel to be introduced into the engine’s cylinders. The failure of an O2 sensor can also result in a vehicle failing an emissions test
  • Your Acura is experiencing a vacuum leak. Every Acura is equipped with a vacuum system that is capable of performing a diverse range of tasks. The vacuum system also contributes to the reduction of hazardous emissions by directing fumes away from the engine when fuel evaporates through it. Whether your engine’s RPM is high at idle or surges at random, a vacuum leak might be the source of the problem. When exposed to excessive heat or cold, vacuum hoses can dry up and fracture over time. One of the most common and frequent causes of vacuum hose failure is a loose, broken, or missing gas cap on your Acura vehicle. The gas cap on your Acura is useful for a variety of reasons. In addition to preventing gas fumes from being emitted when you are not driving, it also helps to maintain pressure within the fuel tank by securing the fuel system. What happens if you have a faulty gasoline cap on your vehicle? If your gas cap is traditional or has a burst seal, you may lose gasoline through evaporation, which will result in more trips to the gas station and more money spent on petrol. Fortunately, replacing a gas cap is not a costly endeavor. After filling your Acura’s tank with petrol, the first thing you should look for is a loose gas cap — or to make sure the cap is still on your car’s roof or at the fuel pump
  • If the top is still there, the next thing you should look for is a leak in the fuel line.

Leave a Comment

Your email address will not be published. Required fields are marked *