Add Cabin Air Filter to GM Trucks? (Solution)

  • Bend the top stage and slowly insert the cabin air filter into the HVAC module, with the filter stages (cut outs) facing inboard while the pull strip is pointed down as shown in the illustrated above. Important: The cabin air filter MUST be flush with the HVAC module access opening as shown in the illustration above.

Do Chevy trucks have cabin air filters?

There are two main air filters in your Chevy Silverado. The cabin air filter is located either behind the glove compartment, under the dashboard, or under the hood of your vehicle. In most cases, it will be located behind the glove box.

What year did GM start using cabin filters?

The cabin air filter or cabin micro-filter was first introduced on GM vehicles around the turn of the century (2000). Depending on how much you drive your Chevrolet, it is recommended that you have your cabin air filter replaced every 15k – 30k miles.

Is a cabin air filter really necessary?

An air cabin filter is an important component in any vehicle’s heating and cooling system. It helps protect the passengers from contaminants in the air they breathe. An air cabin filter is an important component in any vehicle’s heating and cooling system.

Why do some cars not have cabin air filters?

Not all cars indeed have cabin air filters. However, the new cars do have them because they can work in the selling point and the interior cleaner. Instead, some other new cars do not have it. Most cabin air filters work in the form of the air filter placed right of the blower fan and under the dash.

Does a 2003 Chevy Silverado have a cabin air filter?

Chevrolet Silverados built between 1999 and 2002 have cabin air filters, but Silverados manufactured from 2003 to 2010 do not. The Silverado shares major components, including the air filter, with other GM trucks and SUVs, including the Sierra, the Tahoe, and the Suburban.

Does a 2005 Chevrolet Silverado have a cabin air filter?

The 2005 Chevy Silverado has a cabin air filter that is located in the truck on the passenger side behind the glove box. You will need to remove the glove compartment completely and then You can access the plastic panel that covers the filter.

What happens if you don’t change your cabin air filter?

If you don’t change your cabin air filter, the filter will become more clogged with dirt and debris and the efficiency of the filter and your car’s HVAC system will be compromised. The air volume into your passenger compartment will be continually reduced which will lead to the issue of foul odors inside your car.

Does a 2006 Chevrolet Silverado have a cabin air filter?

Yes, most 2006 Chevy Silverado trucks have an air cabin filter. This filter is located near the glove box of the truck. It’s important to replace it as often as the manufacturer warranty recommends.

How often does a cabin filter need to be replaced?

Experts across the auto industry agree that your cabin air filter should be replaced just about every 15,000 miles.

Are cabin air filters a waste of money?

Cabin Air (and Other) Filter Replacement Generally accessed through the glove compartment, its main purpose is to improve air quality inside the car. Most service manuals recommend replacing it annually. A car repair shop will charge you as much as $70. Don’t waste the money — do it yourself.

Does a cabin filter affect gas mileage?

Can a dirty air filter impact fuel economy? While a soiled cabin air filter can affect the AC system, a dirty engine air filter can cause engine performance problems. In fact, changing a dirty engine filter can improve gas mileage by as much as 10%.

Does the cabin filter affect AC?

A cabin air filter whose pores are blocked can cause a strain on the AC system. Apart from resulting in increased energy consumption, the strain can lead to damage of the motor due to overloads. This would especially happen when you have to increase the airflow by increasing the speed of the AC system blower.

Does my truck have a cabin air filter?

Cabin air filters are located in the ductwork that delivers outside air to the HVAC system. In some cars, the filter is in the engine compartment near the base of the windshield. In others, it is located under the dash or behind the glove box.

Can you drive without a cabin filter?

An air filter might not seem like an essential component, but it’s more important than one might think. Driving without an air filter is possible, but it’s definitely not a good idea, as this component keeps all kinds of debris out of your climate control system and keeps cabin air fresh and safe to breathe.

Do all vehicles have a cabin air filter?

Most modern vehicles manufactured since 2000 have a cabin air filter. A clean air cabin filter can help prevent smog, dust, debris, rodent droppings, pollen, and mold spores from entering the air you breathe in your vehicle.

Add Cabin Air Filter to GM Trucks

GM full-size pickups and SUVs from 2007 to 2014 are equipped with a cabin air filter cavity, but no filter is fitted in the vehicle. This is due to the fact that the GM design called for a bendable cabin air filter, which was never really produced until today. In recent years, AirSept has produced a bending cabin air filter that is a straight match for the air filter cavity that is already incorporated into your General Motors car.

Read further

AirSept cabin air filter has bendable segments

To install the AirSept cabin air filter, just remove the existing cabin air filter. The bending cabin air filter from AirSept is a perfect match for the lid from the General Motors cabin filter cavity. Then place the AirSept filter into the system. Finally, screw on the cabin air filter cover plate that was provided, and you will be able to enjoy cleaner cabin air. The entire procedure is completed in less than 15 minutes. As an alternative to the regular air filter, AirSept also provides a carbon-based variant that is effective in odor absorption.

Where to buy the AirSept Cabin Air Filter

AirSept also manufactures a number of other ‘trouble solver’ items that are designed to help professionals and do-it-yourselfers resolve air conditioning and heating problems. Take a look at these interesting products: kit de blocage de l’air septique It may be used to seal off leaking or broken rear evaporator coils on SUVs and minivans, for example. Because of the age and condition of the vehicle, a block off kit is the most cost-effective way to keep your front AC evaporator coil pumping out cold air after the rear unit has failed and where replacing the rear unit is either too expensive or simply impractical due to the failure of the rear unit.

  1. Kit for repairing the overflow tube on an AirSept PERMATUBETM radiator.
  2. With the AirSept PERMATUBE kit, you can repair your old radiator in as little as 15 minutes and for a fraction of the cost of a new radiator.
  3. It is possible to get the bendable cabin air filter from General Motors parts suppliers, as well as from online and retail car parts vendors, using the following GM, Dorman, and retail component numbers.
  4. However, when you consider that you can now get a filter for your General Motors car that does not require any modification, it is a wonderful deal.
  5. Cabin Air Filter with Cover Plate (part number 259-200).
  6. Alternatively, it is available at retail auto parts stores under the following part numbers: The 90015 is an air filter for the cabin.

Rick Muscoplat is a professional musician. Rick Muscoplat posted a blog entry on

Cabin Air Filter Retrofit/Install

So you’ve lately discovered that your gmt800/900 doesn’t come equipped with a cabin air filter. I know, it comes as a major surprise considering that every other car has one. In case you’re wondering what I’m talking about, it’s a filter that sits between your truck’s vents and the exterior of the vehicle, preventing dust and debris (as well as potentially bad odors) from entering the vehicle. Well, it turns out that Silverados formerly had them. the year prior to the release of the SSS You can thank your friendly General Motors engineer for attempting to save a few dollars on production and subsequent repairs for people who do not change their tires on a regular basis.

See also:  P0123 Dodge?

or at the very least combined the elements from prior years into a single compact bundle Do not be concerned, I will demonstrate how to accomplish this.

Nerd, just shut up and relax.

So, first and foremost, before ordering any parts or even deciding to embark on this project, you should examine the following points: Do you have the tools necessary to complete the task: Ratchet with sockets for 7mm, 1/4, and 7/32 inch drive (or equivalent) Cutting instrument such as a Dremel or other suitable cutting device with a 90-degree tool head (ideally) Box cutter or other suitable razor blade device Spectacles for protection (safety first) Loads and lots of patience is required.

  • Using a high-speed rotary tool to make irreversible cuts into your truck’s HVAC system, do you feel confident in your abilities?
  • Are you prepared to spend an hour cursing at a single insignificant screw?
  • That’s a piece of cake.
  • Get beneath the dashboard and, using your 7mm socket tool, remove the three screws that hold the HVAC shield in place, which keeps everything down there safe.
  • Hopefully, this will teach you a lesson about not thoroughly reading the forum before trying this work).
  • It’s a GIANT PITA to deal with.
  • However, if you pull this screw out, you should be prepared to spend a considerable amount of time attempting to put it back in.

Remove only the two easiest ones for this step since you will need to put it back on till you receive your replacement components.

There are three different kinds available.

Because I have a 2006, I have the Gen2 image you see above.

Always remember that there are two sorts of filters: a normal pleated filter that keeps dust and debris out, and a carbon filter that keeps dust and debris out as well as helping to filter out unpleasant odors from the air.

A standard air filter is GM22759203, while a carbon air filter is GM23101674 (both available).

(I used this one, which worked well and was about $48 on Because the installation of all three forms is generally similar, with only slight modifications, it is quite simple to adjust these instructions to your particular style.

Remove the lid once more, just like you did previously.

After that, remove the Blower Motor Resistor by unscrewing it.

This is what it looks like: Disconnect both connectors, or if you are unable to reach the PITA connector into the back of the Blower, simply unhook one connector and tuck the Resistor under it until you can access it.

The exciting part is about to begin.

This is where things become a little more complicated.

This one will have the cover tab on the front and the screw post on the back, just like the last one.

According to what I’ve heard, it can be done using a razor blade.

You will be making a 10.25′ x 1′ slot in the table.

Simply make a cut that is little smaller than the filter.

The tab on this one is located in the rear, whereas the screw post is located in the front.

This is only a recommendation on your part.

You may also try on your cover to see how it fits: Take note of the 90-degree angle of the head.

Alternatively, if you prefer, you may purchase half-filters and just cut a hole in them that is half the length of the filter (the length of one of the half filters).

It will still function well with a half-cut because it is intended to be used on the outside of the hole.

Once you’ve completed your preliminary cut, turn your attention upward.

You’ll also very likely find years’ worth of unpleasant junk squished into the heater core.

The vertical surfaces will be visible just within your incision, before it opens up to reveal the heater core on the other side.

It will, by chance, be the precise size that you require for your filtering system.

Cut all the way to the center groove that is jutting out.

Make sure that this surface is smooth, as well as the bottom surface where the cover mounts, in order to achieve a good sealing seal.

It should go in smoothly without catching on burrs, and it should come to a full stop with the bottom totally flush with the surface of the cover.

Using two half filters, you will slide one up and then push it to the rear, and then slide the second one in beside the first one, as seen below.

Replace the filter with a new one.

To attach the cover to the screw post, take your new 1/4-inch screw and thread it into the cover with it.

Avoid using a drill, and if you have a Gen2, screw it in until the seal is softly squeezed and the tab is in contact with the screw post (see illustration).


Make a thorough cleanup of the area and grab the HVAC cover.

If you just unscrewed two screws, that’s great; just screw it back on.

Take out your 7mm, preferably one with a deep well.

It has a screw well on the inside that, if you look closely, has a depression that will fit perfectly over the top of the screw post beneath the dash.

Take the cover off and carefully insert the screw post into the indentation in the cover’s surface.

In this position, the socket and screw will remain in place while you manually tighten the screw.

Remove the socket by pulling it out.

Tighten the remaining two screws to ensure a secure fit.

Thanks to you, you’ve just spared yourself an hour’s worth of swearing. Clean up after yourself and give yourself a pat on the back while taking deep breaths of fresh filtered air. Do not forget to hit a General Motors engineer in the groin the next time you come across him.

Chevrolet Silverado 1500 Cabin Air Filter Retrofit Kit

Your Chevrolet Silverado 1500 will be relieved to learn that the quest for the appropriate Cabin Air Filter Retrofit Kit goods that you’ve been looking for has come to a conclusion. We have three distinct Cabin Air Filter Retrofit Kits for your car, all of which are available for shipment or in-store pick up at Advance Auto Parts. Most importantly, our Chevrolet Silverado 1500 Cabin Air Filter Retrofit Kit goods are reasonably priced, with some items starting as little as $38.99. When it comes to your Chevrolet Silverado 1500, you want to be sure that the parts and accessories you use are from trustworthy manufacturers.

Dorman – OE Solutions, ACDelco, and others are among the leading manufacturers of Cabin Air Filter Retrofit Kits.

To help you shop with confidence, we’ve included customer reviews for both our OEM and aftermarket Cabin Air Filter Retrofit Kit items.

You may shop online and have your purchases delivered to your doorstep at the greatest possible price and quality.

FAQs forChevrolet Silverado 1500 Cabin Air Filter Retrofit Kit Products

Chevrolet claims that there might be a service opportunity for more than 7 million Chevrolet, GMC, and Cadillac trucks and SUVs in the United States. The introduction of cabin air filter retrofit kits by ACDelco has created what the company claims is a $350 million dollar business opportunity for vehicle repair facilities that handle more than 7 million Chevrolet, GMC, and Cadillac trucks and SUVs, according to the company. More information is available by clicking here. The kit, which comprises a cover, a bolt, and a fastener, is designed for simple installation in 2007-2014 Chevrolet Silverado, Tahoe, Suburban, and Avalanche models, as well as GMC Sierra and Yukon models, and the Cadillac Escalade vehicles, among others.

See also:  Reasons to avoid AC recharge kits? (Solution)

The ACDelco cabin air filters themselves are highly developed components that meet or exceed original equipment manufacturer (OE) specifications:

  • A multi-layered design incorporating woven and non-woven media assists in the separation and trapping of dust and pollen particles while maintaining airflow. Inserts made of electrostatic multi-layers can assist in trapping up to 95 percent of dirt and dust as well as pollen and other undesired pollutants as small as 10 microns in size.

According to ACDelco Filtration Specialist Tom Gundry, ‘These kits can really save clients money by preventing them from having to make costly repairs later on.’ Keeping heater cores and air conditioners from getting clogged, which may cause odor problems and make the temperature control system ineffective, is the goal of cabin air filters. We’ve all been in vehicles that were either too hot, too chilly, or reeked of rotten eggs. It’s just not nice, but it can be prevented with a relatively minimal commitment of time and money on your part.

Cabin air filters should be replaced every 22,500 miles after they have been fitted under typical driving circumstances.

The tires of drivers who travel on gravel roads or who live in hot, dry areas should be changed more often. More information on the ACDelco cabin air filter retrofit kit may be obtained by contacting an ACDelco salesperson in your area or by visiting

How To: Add Cabin Air Filters

This was completed on a 2007 LBZ. The GM kit appears to be intended primarily for use with NBS trucks, but as you can see, it also works with this OBS truck. To complete this task, the following tools will be required: a 1/4′ drive – 9/32′ deep socket, a tiny socket wrench, and a thumb wheel socket wrench are all available options. A step drill bit is a type of drill bit. A strong, robust utility knife with a fresh, sharp blade that is 1/4 inch thick ‘cover screw socket with a socket for the cover screw The following components are required: GM cover part22759208Wix filter24805acDelco Cabin filterCF104 (Best)cc=1380305 jsn=474 GM cover part22759208Wix filter24805ac Take off the three screws that keep the lower cover in place and you’ll be ready to go.

  • It’s a struggle to get the far left one over the hump.
  • I don’t understand the point in doing this.
  • It is entirely up to you whether or not to re-install; I did not.
  • All of the techniques I attempted to carve out the opening for the filters were too hard since the plastic debris just rolled up and got in the way.
  • A step bit was used for the beginning holes, and then a utility knife was used to make flush cuts along the edges.
  • You just want a little more than a 6 ‘It is preferable to have a lengthy slot to place the filters, but additional space is acceptable as well.
  • I clean my evap coil on a regular basis; in fact, I just did it a couple of months ago.

When it came time to clean the coil surface, I utilized a paint roller pan to capture the water debris on the floor and a garden hose with a very small cutoff on the end that was only just slightly opened to allow for a small trickle of water.

The pan that was employed was just for catching any excess overspray or drips that may have occurred.

Here we have the coil, which is now shining and clean, with one of the two filters fitted and moved forward into position.

I understand that the space appears to be insufficiently large for the second filter to be accommodated.

Insert the tab on the cover’s end into the slot, raise up and compress the seal by inserting the 1/4-inch screwdriver into the supplied 1/4-inch hole ‘To keep it in place, screw it in.

We’re finished now.:neener: Reinstall the lower trim cover and you’re done. Turn up the air conditioning and take a drive. Then, with cold, clean air blowing once more, bask in the glow of accomplishment as you bask in your beaming happiness. humpin:

2012 Chevy Silverado Air Filter

Please wait for the page to load completely.

2012 Chevy Silverado Air Filter

Your 2012 Chevrolet Silverado has two middle air filters, one on each side of the engine. This filter is positioned in the engine compartment and is responsible for filtering out dangerous particles that might cause damage to your vehicle’s engine. It is designed to last for a long time. If the engine air filter is not replaced at the recommended intervals, the build-up can have a negative impact on the performance of your engine, resulting in a loss of power as well as a reduction in fuel economy.

The majority of the time, it will be found behind the glove box.

Pollen and dust are removed from the cabin air through the cabin air filter.

Schedule your next air filter service appointment with Hare Chevrolet online today, or give us a call at 3173336958 to talk with one of our service advisors about your vehicle.

2012 Chevy Silverado Engine Air Filter

Simply put, the primary function of your 2012 Chevy Silverado engine air filter is to clear the air of hazardous particles like as dirt, dust, and other unwanted debris before it is introduced into your vehicle’s combustion chamber. In order to burn fuel, all engines require a sufficient supply of fresh air. All foreign elements have the potential to harm your engine and cause it to become quite expensive to fix, which is why you should have your Chevy technician check your filters on a regular basis at each appointment.

Make an appointment as soon as possible!

2012 Chevy Silverado Cabin Air Filter

The most important function of your cabin air filter is to filter the air that flows through your car’s heating and cooling ventilation system before entering the vehicle. This filter is capable of capturing hazardous pollutants and allergens such as smog, pollen, mildew, and dust.

How often should you replace car air filter?

According to the service handbook for your 2012 Chevrolet Silverado, you should replace your engine air filter and cabin air filter every 10,000 miles under harsh conditions and every 15,000-30,000 miles under normal operating circumstances. The fact that your car’s filters are examined every time you take it in for an oil change is a peculiar curiosity. Every time you come to Hare Chevrolet, we will do this service at no cost to you. If you live in a high pollutant region or an area with a high pollen count, it’s a good idea to change your filters once a year since it’s a reasonable amount of time given how long they’ve been in use.

If your allergies are as terrible as ours, you’ll be glad you took the precautions. Make an appointment with Hare Chevrolet right away!

2012 Chevy Silverado Air Filter Coupons

Hare Chevrolet is now running a promotion that offers massive discounts on air filters. The most recent 2012 Chevy Silverado air filter coupons may be found by visiting this page. A free multipoint examination of your vehicle will be performed by one of our factory-trained specialists who will change your air filter as soon as possible and effectively. While you’re waiting, take advantage of our complimentary food and beverages, as well as our free WiFi. Make an appointment for your next servicing appointment online and save even more money!

See also:  Honda door locks cycling?

2012 Chevy Silverado Air Filter Price

Engine air filters often range in price from $20 to $45 depending on the kind of filter required, whilst cabin air filters typically range in price from $15 to $35 depending on the manufacturer. Hare Chevrolet will install your filters in less than 30 minutes, saving you money on labor expenses while still providing you with the highest quality certified OEM components available. It is direct to use certified air filters for your 2012 Chevy Silverado in comparison to less expensive aftermarket parts because certified parts are made specifically for your vehicle and will not only last longer, but they will also perform more effectively.

Because of our contact with the manufacturers, we are able to give you with the polite filter you want at a very competitive price.

Call us at 3173336958 or use our online booking system to schedule an air filter servicing appointment!

How do you know if your 2012 Chevy Silverado needs a new air filter?

It’s actually rather lovely to be able to see the need for a new engine air filter as well as a new cabin air filter when driving. In order to determine whether your 2012 Chevrolet Silverado’s engine air filter needs to be replaced, look for any or all of the following symptoms:

  • Slow engine starts
  • Clogged air filter
  • Residue or dust accumulation around the engine air intake
  • Fuel economy has been reduced. The service engine light is illuminated on your dashboard. Acceleration has been slowed. The exhaust is emitting a thick, black cloud of smoke. When the engine is idling, it makes strange noises.

The following are symptoms that your 2012 Chevrolet Silverado cabin air filter needs to be updated on a regular basis:

  • Increased noise from your air vents that is out of the ordinary
  • A foul odor
  • There is a reduction in air flow.

2012 Chevy Silverado Air Filter Replacement

It is recommended that you check your vehicle’s air filter every 10,000 miles, but replacing it is only necessary every 15,000 to 30,000 miles, depending on your driving patterns. Depending on the circumstances, your engine air filter may need to be updated every 10,000 miles in some situations. The cabin air filter, on the other hand, should be replaced on a more frequent basis in order to prevent you and your passengers from inhaling allergens. Always refer to the maintenance advice for your 2012 Chevrolet Silverado, which can be found in your owner’s manual, for the most up-to-date maintenance recommendations.

2012 Chevy Silverado Air Filter Change Near Me – Chevy Silverado Air Filter Indianapolis

Hare Chevrolet’s Chevy trained experts analyze and replace your engine air filter and cabin air filter using only original equipment manufacturers (OEM) components and tools. The use of certified parts not only saves you money in the long run because they are of the highest quality, but also because of our close working relationship with the manufacturer, we are able to provide replacement parts and services for your 2012 Chevrolet Silverado at the most competitive prices in the area.

Call us at 3173336958 or use our online scheduling tool to make an appointment.

Chevrolet Silverado cabin air filter location

The position of the Chevrolet Silverado’s cabin air filter. Beginning with the years 1999, 2000, 2001, and 2002. When it comes time to change your Chevrolet Silverado cabin air filter, this page will show you where to look. A Chevrolet Silverado’s cabin air filter may be found at the following location: A car’s maintenance requirements vary from one vehicle to another. If your auto service is approaching, you may learn how to change the air conditioning filter by reading the instructions below.

The following procedures must be followed in order to get access to and change the cabin air filter on a Chevrolet Silverado:

  • Locate the glove compartment by opening the passenger-side door. Remove the kick plate from under the glovebox by unscrewing the screws that hold it in place. You will be able to locate the cabin air filter housing cover in this location, as seen in the image below.
  • Remove the filter housing lid and the filters from the filter housing. Remove the first filter by drawing it straight down, and then slide the second filter forward and repeat the process with the third filter.
  • In order to insert the second filter, first insert the first filter and move it into the proper position. Replace the kick plate in its original location.

Please feel free to ask any questions you may have regarding how to change the air conditioning filter in your Chevrolet Silverado. You may find out more about where to find the Chevrolet cabin air filter or air conditioning filter by visiting the manufacturer’s website. If you want to know how to reset the service light reminder on your Chevrolet Silverado, go to this page. Identifying which filters on your Chevrolet Silverado need to be changed includes: cabin air filters, oil filters, gasoline filters, pollen filters, dust filters, and air filters (if applicable).

In what circumstances is it required to replace the cabin air filter?

This is especially important if anyone in your vehicle is allergic to pollen, dust, or other particles.

GMT 800 / 900 Cabin Air Filter Retro Kit GM/OEM parts

Instructions on how to install the GMT 800 and GMT 900 chassis Cabin Air Filter Retro Fit Kit using GM/OEM parts are provided. Complete this refit at your own risk; I will not be held liable for any harm that may result. GMT 800 is 2003 and above. (Take note of a possible conflict; check the ‘L’ bracket on the 2500/3500’s with twin filters.) – – – – – – – – – – – – – (Older style – I have not done this to a GMT – 800 series try at your own risk) All times are GMT 900. NEWS FLASH: WT’s on GMT 900’s will not fit since the HVAC casing is different.

Part Numbers for General Motors (GMT 900 series straight bracket) 22759208 – Retrofit Kit (Retrofit Kit) (bracketscrew ONLY, no filter) Cabin Air Filter (Part Number: 22759203) Cabin ‘Carbon’ Air Filter (Item 23101674 ) There is just one sort of filter required.

(Older style) 52494070 – Cabin Air Filter Cover with a ‘L’ Bracket (not sure if screw is included) 19257782 – Cabin ‘standard’ air filter (for the cabin) (QTY 2 half filters) 12489479 – Cabin air filter with ‘Carbon’ filtration (QTY 2 half filters) There is just one sort of filter required.

Top side bracket retrofit kit with a retrofit kit Kit for retrofitting Side of bracket that is closest to the ground Filtering the air using carbon (Notice the ‘V’ cuts) Remove the cover from the lower HVAC panel (3 screws, 1 under console is difficult 7mm magnetic bit works well) Before making any modifications to the retrofit kit, Remove the resistor/regulator from the blower motor (allows for more wiggle room) Slot in the back Score the plastic, then shave/thin the plastic as you go, repeating the process over and again (I was able to scrape most the plastic away using a 90 degree pick, only needed a razor blade to make a very lite cut afterwards) When scoring this material, it is quite soft and doesn’t take long to cut through; just be patient and don’t rush it.

When scoring the plastic for the first time, I would not advocate using a blade or razor.

Retrofit kit as well as carbon air filter have been fitted.

Make sure not to overtighten the screw; there should be a slight space between the bracket and the slot in the screw housing. It was easier for me to start the third screw, which is located beneath the center console, from the driver’s side.

Leave a Comment

Your email address will not be published. Required fields are marked *