Kia lug nut torque specs? (Question)

2020 Kia Models Wheel Lug Nut Torque Specs Table

2020 Kia Models Engine Wheel Lug Nut Torque Specs ft-lb (Imperial)
K900 AWD/RWD All 79.6 – 94 ft-lb
NIRO All + Electric 79.6 – 94 ft-lb
KIA OPTIMA All 65.1 – 79.6 ft-lb
RIO All 79.6 – 94 ft-lb

8 •

What is the lug nut torque on a 2016 Kia Soul?

The 2016 Kia Soul lug nut torque is listed at 70 – 80 ft/lbs from the factory specs.

What size lug nut is on a 2016 Kia Forte?

Kia Forte 2016, Cone Seat Acorn Lug Nuts by Gorilla Automotive®. Thread Size: M12 x 1.5. Hex Size: 13/16″. Overall Length: 35.56 mm.

What is the torque spec?

Recommended torque specifications are unique for each type of vehicle. By definition, torque refers to the amount of rotational force at the point of application. When attaching a wheel to a vehicle, torque specifications are the amount of force recommended on the hardware to ensure proper installation.

Can you over tighten lug nuts?

Excessively tightened lug nuts can strip the threads, distort brake rotors, damage the wheel, and possibly shear off the lug stud. Insufficiently tightened lug nuts can come loose, with catastrophic consequences.

What size are the lug nuts on a 2018 Kia Soul?

Dorman – Autograde – Wheel Nut M12-1.5 Acorn – 21mm Hex, 34.8mm Length (sold by each) (Part No. 611-315) Our Wheel Lug Nuts are designed and constructed to strict engineering quality standards.

What size lug nuts are on a 2019 Kia Soul?

M12x1. 5 Bulge Acorn Locking Wheel Lug Nuts (3/4″ and 13/16″ Hex)

What size lug nuts does a Kia Soul have?

Dorman – Autograde – Wheel Nut M12-1.50 Open Bulge Seat – 19mm Hex, 21.4mm Length (Part No. 611-183.1)

What size are the lug nuts on a 2014 Kia Soul?

Kia Soul 2014, Cone Seat Acorn Lug Nuts by Gorilla Automotive®. Thread Size: M12 x 1.5. Hex Size: 13/16″. Overall Length: 35.56 mm.

How much oil does a 2015 Kia Soul take?

SAE 5W-20 is preferred. Capacity: 3.8 quarts…. (with filter)After refill check oil level.

What size are the lug nuts on a 2017 Kia Forte?

Kia Forte 2017, Cone Seat Acorn Lug Nuts by Gorilla Automotive®. Thread Size: M12 x 1.5. Hex Size: 13/16″. Overall Length: 35.56 mm.

What size lug nuts Kia Forte?

Dorman – Autograde – Wheel Nut M12-1.50 Open Bulge Seat – 19mm Hex, 21.4mm Length (Part No. 611-183.1)

What size are Kia lug nuts?

The lug nuts for a 2019 kia optima will have a hex size of 19mm and a thread size of m12 x 1.5.

Kia Lug Nut Torque Specs Table

In the event that you plan on putting a wheel on your Kia, it is critical that you be aware of the torque settings advised by the manufacturer. It is important to use the right torque to ensure that the wheel assembly is properly mounted. When working on anyKiavehicle, theKia Wheel Lug Nut Torque Chartthat we have produced may be utilized as a quick reference tool for roadside service providers or DIY enthusiasts. Using the required torque from the manufacturer also helps to ensure that there isn’t any excessive or insufficient pressure on any of the components to which the wheel is attached during installation.

See also:  Ford PATS Antitheft System? (Professionals recommend)

Kia Lug Nut Torque Specs Recommendations

Make Model Trim Year Range Torque
KIA AMANTI ALL / SEDAN 2004 – 2008 85 ft-lbs
BORREGO BASE / LX V6 2009 – 2009 100 ft-lbs
CADENZA 18″BASE / PREMIUM 2014 – 2018 80 ft-lbs
FORTE – ALL 16″BASE / KOUP EX 2010 – 2016 80 ft-lbs
FORTE(5) SEDAN / HATCHBACK 2017 – 2018 95 ft-lbs
K900 19″BASE / V8 2015 – 2018 80 ft-lbs
NIRO HYBRID 2018 – 2019 95 ft-lbs
OPTIMA 16-INCH / LX/EX 5LUG 2006 – 2018 80 ft-lbs
OPTIMA SEDAN / ALL 2001 – 2010 85 ft-lbs
RIO 5 15″BASE / SX 2006 – 2012 80 ft-lbs
RIO 5-DOOR 15″BASE / EX 2013 – 2016 80 ft-lbs
RIO 14″BASE / BASE 2006 – 2012 80 ft-lbs
RIO ALL / ALL 2001 – 2005 85 ft-lbs
RIO CINCO ALL / WAGON 2002 – 2005 85 ft-lbs
RIO SEDAN 15″BASE / EX/LX 2013 – 2018 80 ft-lbs
RONDO 16-INCH / ALL 2007 – 2010 80 ft-lbs
SEDONA VAN / LX/EX 2002 – 2018 80 ft-lbs
SEPHIA ALL / ALL 1993 – 2001 85 ft-lbs
SORENTO 16-INCH / LX/EX 2003 – 2019 85 ft-lbs
SOUL 15″BASE / BASE 2010 – 2018 80 ft-lbs
SPECTRA 5 15-INCH / ALL 2005 – 2009 85 ft-lbs
SPECTRA ALL / GS/GSX/K 2000 – 2009 85 ft-lbs
SPORTAGE ALL / ALL 1995 – 2018 85 ft-lbs
STINGER BASE / GT 2018 – 2019 95 ft-lbs

Remove or Install Front or Rear Wheel – Generic Instructions

When removing and replacing a wheel on your car, always follow these general directions, but consult your owner’s handbook for more specific information. Always use the right equipment while raising your car, and only remove the vehicle off its jacking points one wheel at a time. If you are working on the opposite wheel from the one you are currently working on, always use two wheel chokes on both sides of the wheel to prevent the car from rolling and falling off the jack while you are working on it.

  • Never use an impact drill to remove wheel locking nuts or bolts
  • Instead, use a breaker bar to pry the nuts or bolts loose by hand. Do not leap or use your foot to break the breaker bar
  • Instead, use your hands. Removing debris, oil residues, and corrosion from the contact surfaces of the rim and wheel hub
  • Check that the brake disc holding bolt is securely fastened
  • Apply anti-seize paste to the wheel rim, ensuring that the paste is centered in the wheel rim
  • Clean the bolts or nuts on the wheels and inspect them for damage, replacing them if required. Wheel bolts that have deteriorated should be replaced. Attention! It is not recommended to use oil or grease on the wheel studs or bolts. The rim of the wheel must be flat against the brake disc in order for it to function properly. Using a crosswise sequence, screw in the wheel bolts or lug nuts and uniformly tighten them by hand in order to center the wheel rim
  • Using a calibrated torque wrench, tighten the wheel bolts or lug nuts in a transverse sequence to the prescribed tightening toque. To ensure consistency, inspect and tighten all wheel bolts or lug nuts in the same order. If required, retighten to the specified tightening tension. Use of pneumatic or electric screwdrivers to screw in and tighten the wheel bolts is not permitted under any circumstances.
See also:  Transmission fluid leak?

Kia Forte Lug Nut Torque Specs And Sizes (2010 – 2021)

Kia Forte
Year Lug Nut Torque Lug Nut Size
2010 65 – 79 lbf-ft (88-107 N-m) M12 x 1.5
2011 65 – 79 lbf-ft (88-107 N-m) M12 x 1.5
2012 65 – 79 lbf-ft (88-107 N-m) M12 x 1.5
2013 65 – 79 lbf-ft (88-107 N-m) M12 x 1.5
2014 65 – 79 lbf-ft (88-107 N-m) M12 x 1.5
2015 65 – 79 lbf-ft (88-107 N-m) M12 x 1.5
2016 65 – 79 lbf-ft (88-107 N-m) M12 x 1.5
2017 79 – 94 lbf-ft (107-127 N-m) M12 x 1.5
2018 79 – 94 lbf-ft (107-127 N-m) M12 x 1.5
2019 79 – 94 lbf-ft (107-127 N-m) M12 x 1.5
2020 79 – 94 lbf-ft (107-127 N-m) M12 x 1.5
2021 79 – 94 lbf-ft (107-127 N-m) M12 x 1.5

Wheel nut torque settings! Which do I use

With no intention of deviating from the OP’s post, wheel nut torque wrench settings exist for a reason. I speak from personal experience after having the front wheel of a coach I was driving changed on the side of the M2 motorway; the wheel was put on and tightened in a hurry due to the dangers associated with changing a wheel on the highway. I started out driving along the side of the Channel Tunnel, and by the time I got to Fleet Services on the M3, there was a terrible noise coming from the wheel in question.

  • In addition to the time lost and annoyance created, I had to arrange for a tyre firm to come to me with a tyre to install on the punctured tire that had been removed and then refitted.
  • The same fitter returned to my rescue once more, and when he was almost finished, he said that he had “forgotten” to torque the wheel nuts the first time because he was more concerned about getting hit by a car!
  • If you ask me, they were treated rather gently!
  • If you ask me, it beggars belief why anyone would choose to ignore properly tightening any wheel nuts.

I should point out that this occurred on a large vehicle; however, the consequences are the same, regardless of the size of the vehicle. Torque wrench settings for wheel nuts are there for a reason, and they serve a purpose.

Lug Nut Torque Specifications on a KIA Sorrento

The Kia Sorento is a midsize SUV that is manufactured by the South Korean automobile manufacturer Kia. The Sorento originally appeared on the market in 2002 as the first generation. The second-generation Sorento, which has been completely revamped, went into production in 2009. The torque of the lug nuts on the Sorento is critical while changing a tire. The manufacturer’s guidelines should be followed. If the lug nuts are overly loose, they may fall loose throughout the course of the journey.

Additionally, lugs that are torqued to a variety of degrees might create wheel wobbling or cause additional damage to the wheel, tire, or hub.

Definition of Torque

When it comes to turning an item, such as a bolt or a flywheel, torque is defined as a measure of the force necessary to do so. Torque is measured in foot-pounds, inch-pounds, or Newton-meters, which is the metric counterpart of the foot-pound. A torque of 90 foot-pounds indicates that if you had a 1 foot long wrench and applied a force of 90 pounds perpendicular to the wrench, you would obtain a torque of 90 foot-pounds as a result. When it comes to autos, the term “torque” is frequently used to refer to engines.

See also:  When a CV joint goes bad? (Best solution)

Torque Wrenches

A torque wrench is required when a precise amount of torque is required to tighten a bolt. Torque wrenches are classified into three categories: beam, click, and dial. Torque wrenches with beams are those that have two beams connected to the socket. The force is applied by a lever beam, and the torque is shown by an indicator beam, which is located on a scale on the lever. Click-type torque wrenches include an indicator on the handle that can be adjusted to a desired torque; once the desired torque is reached, the ratchet travels freely and a spring causes the wrench to emit a clicking noise, indicating that the required torque has been attained.

As the wrench is rotated, the display reveals the amount of torque applied.

Torque wrenches may be purchased in car parts and hardware stores, among other places.

Kia Sorento Lug Nut Torque Specifications

All Kia Sorentos have a lug nut torque of 85 foot-pounds, regardless of model. The torque standard may be found in the maintenance part of your owner’s handbook, or it can be obtained at any service facility. When changing a wheel, it is usually preferable to tighten the lug nuts in a star pattern rather than torqueing them in a circular pattern around the wheel. Using your hands, tighten one lug, skip to the next and tighten the third, then the fifth, then the second, and finally the fourth.

References Biography of the Author Teri Olcott is a writer who lives in the Endless Mountains of Pennsylvania.

Olcott began working in the technical writing industry in 1998. A number of her writings have featured in publications such as “Radiant Press” magazine and “Epoch.” Olcott has an Associate of Science in radiologic technology from the State University of New York in Binghamton.

More Articles

Messages6Points3Reaction score3Messages6Points3 According to Nac, on page 7-35 of the 2021 owners handbook, it says: “After the rotation, make sure that the front and rear tire pressures are brought up to specification and that the lug nuts are properly tightened. (The correct torque is 79.94 lb-ft.)” To learn more, please go here. Thank you so much, Nac! As I read that, I was filled with embarrassment, but not quite enough! Share:FacebookTwitterRedditPinterest TumblrWhatsAppEmailLink

Log in

Have you forgotten your password? Don’t have an account? Create one now. Now is the time to register.

Latest posts

Introductions and non-Telluride-related discussion Can you tell me how long the wait period is for Telluride SXL in the Greater Toronto Area? Buying a KIA Telluride: What You Should Know Silicone covers for Telluride plates from HLicense. KIA Telluride Discussion I’m looking for a wireless Android auto gadget that I can install in my wife’s vehicle. Discussion on KIA Telluride TechnologyJMSRP in Texas, anyone?

Leave a Comment

Your email address will not be published. Required fields are marked *