Next generation car wax eliminates the hard work? (TOP 5 Tips)

  • Next generation car wax eliminates the hard work Hybrid Ceramic Car Wax is a huge leap forward Traditional car wax is made from blends of natural waxes like carnauba, beeswax, natural oil like linseed and solvents.

Is waxing your car a waste of time?

Regularly waxing a car is essential because it helps preserve the clear coat over a vehicle’s paint. That clear coat is the layer that protects the paint from corrosive elements, including snow, rain, street salt, ultraviolet rays, bird droppings, and tree sap, among other contaminants.

What is the toughest car wax?

Ethos Pro Ceramic Wax is a category standout because it combines traditional synthetic car wax with teflon-infused polish and sealant. That creates a glossy coating the manufacturer claims is 20 times stronger than regular car wax and lasts for months.

Why you shouldn’t wax your car?

Wax adds an extra layer of protection, thereby protecting the clear coat and underlying paint layers from moisture, dirt and debris. Neglecting to wax your car on a regular basis will result in faster degredation of its paint.

Does wax make car easier to clean?

Waxing Your Car Makes It Easier to Clean Whether you take your car to the car wash or you do it yourself, waxing makes it easier and it’s one of the most useful benefits that can come from waxing. Previously mentioned, a protective layer is created, and it prevents harsh scrubbing tactics from being used.

Does spray wax work?

Spray wax is not as good as paste wax. Spray is NOT better than paste wax or liquid wax. It works good on well maintained or newer paint but if your vehicle’s paint has been neglected for years, you’re going to want to pre-clean it, polish it, and use a good paste wax to restore shine and protection.

Is spray wax better than paste wax?

A spray wax is much easier to apply evenly to a vehicle’s exterior. A paste wax takes longer to apply, but can also last longer as well as provide better protection. A paste wax creates a better layer of protection for your vehicle which can be extremely useful during those harsh winter OR summer months.

What is the number one car wax?

Best Overall: Meguiar’s Ultimate Liquid Wax, Automobile Wax 16 oz. With over 100 years in the industry, Meguiar’s is a premier maker of automobile wax and has several high-quality products on the market. Not surprisingly, the brand’s Ultimate Liquid Wax is considered to be the best car wax available today.

What kind of car wax do professionals use?

Our preferred wax is Carnauba wax, which is typically preferred among professional detailers. Waxes applied after vehicle detailing sits on top of the paint and help to create deeper hues in the paint with a liquid-like finish.

Is ceramic coating better than wax?

Ceramic protectants (coatings) provide a much higher durability than wax. They resist heat, UV rays, environmental contaminants & harsh detergents much better than wax. Wax on the other hand simply sits on top of the paint’s surface. It does not create the chemical bond like we find with ceramic coatings.

Can you wax a car in hot weather?

Summer Considerations As mentioned, the ideal waxing temperature is between 60-80 degrees F. Unfortunately, if the temperature is above 80 degrees F, the wax may begin to melt and not be as effective. One way to avoid high temperatures is to avoid waxing in direct sunlight.

How often should I spray wax my car?

Experts commonly recommend that you should apply a car wax to your vehicle once every three months at the least. Some kinds of wax are made to work more often than that. For those who are obsessed with maintaining the perfect wax finish, that might even include products meant to be used every few days.

Does wax protect car paint from rain?

You may have noticed that water beads up on the surface of a freshly waxed car. This happens because wax is hydrophobic, meaning that it does its best to avoid absorbing water (and the paint-damaging acids and contaminants that may come with it). So when rain falls on an unwaxed car, the water starts to spread out.

Can you wax your car too much?

Waxing too much will eventually cause build up and clouding. If you are using a paste wax on your brand new car, it will damage the factory clear coat. However, synthetic car wax will not hurt the paint or clear coat, only many layers of synthetic will start to cloud over time.

Does wax protect car paint from Sun?

If you really want your car to shine, there’s nothing better than a bath and hand drying followed by a luxurious coat of wax. Waxing is the critical final step to prevent sun damage to car paint from ultraviolet radiation and help stop pollution, grit and dirt from adhering to the finish and causing pitting.

Next generation car wax eliminates the hard work

Traditional vehicle wax is composed of a combination of natural waxes such as carnauba and beeswax, natural oils such as linseed oil, and solvents. Solidified car wax is available in two forms: solidified and liquid, depending on the mix and the amount of solvent employed. Solidified wax is the most difficult to apply and spread, and it needs the greatest elbow grease to buff to a sheen once it has been solidified. When compared to the solid forms, liquid forms need far less work to apply, yet they still require effort
to wipe off and buff.

Carnauba waxes are chosen by vehicle buffs because they produce a rich, warm-toned gloss that is difficult to replicate.

Unfortunately, carnaubu wax does not stay very long, so you’ll have to wax multiple times each year if you want to maintain your appearance.

When you use these products, you should anticipate re-waxing your automobile multiple times each year.

Synthetic car wax provides a wet look and lasts longer

Meguiars Synthetic Ultimate Auto Wax takes synthetic car waxes one step further, advancing the state of the art. Micronized polymers and silicones are used to seal the pores of the paint by penetrating deeper into the paint’s pores. Synthetic wax is sometimes referred to as paint sealer because of its ability to penetrate deeply and seal the paint surface. The product produces a ‘wet look’ gloss that is similar to that of glass and lasts far longer than natural car waxes. The WOWO synthetic vehicle wax is also available as a WOWO product, however it is far easier to apply and remove than natural car wax products.

It is fairly unusual for synthetic wax to endure for several months or even a year.

Hybrid Ceramic Wax is major step forward

A hybrid vehicle wax combines the sealing qualities of polymers with the water repelling characteristics of silicone dioxide to create a product that is both effective and environmentally friendly (SiO2). In the construction industry, silicone dioxide compounds are frequently used to offer long-lasting waterproofing to exterior building materials such as concrete and brick. Due to the fact that they are Hydrophobic* (having a tendency to reject or fail to combine with water), they repel water and persist longer than other forms of waterproofing materials.

  • As a result, it is not a WOWO product.
  • While the product is still wet, you spritz it on and then dry it with a microfiber cloth.
  • After that, add a second application and rinse well.
  • For future applications, just spray the product onto a freshly washed and rinsed surface, and then spray rinse the vehicle with a vigorous stream of water to complete the process.

Using a microfiber towel, dry thoroughly. Meguiar’s claims that their Hybrid Ceramic Wax outperforms any regular auto wax in terms of durability. Is it easier to apply and does it persist longer? What’s not to enjoy about this?

Find Meguiar’s Hybrid Ceramic Wax at auto parts stores and online

*Due to its nanostructure and chemical properties, hydrophobic silica exhibits water-resistance characteristics. When nanoparticles are placed on the surface of a substance, they cling to the host material and prevent liquids from penetrating the rough roughness of the surface. All of the water comes into touch with the tips of the nanoparticles that have been coated on the exterior of the substance. The water is repelled from the hydrophobic silica as a result of the absence of attraction between the two materials.

Rick Muscoplat posted a blog entry on Meguiar’s G12718 NXT Generation Tech Wax 2.0, 18 fl oz : Automotive

Meguiar’s has several lines of products designed for all aspects of at-home interior and exterior car care. With multiple product families, every customer is sure to find the right product for them, with options from the premium Ultimate line, Gold Class line, Classic Meguiar’s products, and more. From headlight care, to interior detailing, to all five steps of maintaining your paint (wash, clean, polish, protect, maintain), Meguiar’s has a premium product for every aspect of care.

Mirror Glaze

Meguiar’s Mirror Glaze products are ideal for the true car care professional. With products ranging from aggressive Detailing Clay, to Swirl Remover, various Compounds, Sealants, and more, detailing enthusiasts, professional detailers, and body shops professionals can find exactly what they need to get that show car shine. When walking around at some of your favorite car shows, such as the Pebble Beach Concours d’Elegance, you’ll find that many trust the Meguiar’s Mirror Glaze line to get their cars ready for the big day.


Meguiar’s Detailer products are the perfect solution for anyone running a garage, washing and detailing several cars a week, and commercial car washes. With quality concentrate product provided in large containers (1-gallon and 5-gallon for many products), customers won’t be running to the store every other day for more of their favorite cleaning and detailing products. Meguiar’s also offers labeled and color-coded spray bottles for users to dilute the Detailer product in and use with ease.

Marine / RV

Meguiar’s MarineRV products are ideal for boat and RV owners of all kinds. All the basic care products, such as Gel Wash, Vinyl and Rubber Cleaner, and Quik Wax, are included in the Classic Marine and RV line. For the most extreme watercrafts, Meguiar’s formulated the Extreme Marine line, with Water Spot Detailer, Multi-Surface Cleaner, and VinylRubber Protectant, in a sleek, spherical bottle. For your premium vessel, you can also look to Meguiar’s Flagship line to beautify and protect your boat.

Seems like the NXT Generation Car wash removes Paint protect 365 and Sealant 2.0

  1. November 28th, 2016, 12 p.m. Representative Power6. 1Registered Member

Seems like the NXT Generation Car wash removes Paint protect 365 and Sealant 2.0

  • How is this possible when the soap has a PH value that prevents this from happening? What I did was as follows: I thoroughly cleaned the entire vehicle. With a machine, I applied turtle wax (yeah, I’m sorry), a form of hard wax (not fluid), to the surface. MF was used to get rid of it. Sealant 2.0 was applied using a machine. MF was used to get rid of it. The resault was quite effective! When it rains and thereafter, the water creates beautiful pearls, which is a great touch. After a week, I decided to get the Paint Protect 365 as well as the NXT soap. I cleaned the car once more and applied the product with MF, waiting approximately 5-10 minutes, and then removed it with MF. This worked really nicely as well, although I didn’t see much of a difference because everything was already excellent. While washing my car the following time (again with the new soap), I observed that while using the pressure hose, there appeared to be some type of white ‘milk’ or other residue being taken from my paint. I’m not sure what this is. When I flushed the ground, I looked to see if there was any soap left in the water from the preasurehose, but there wasn’t any. When I was finished, everything appeared to be in order, based on my best estimate. It happened again the second time I cleaned the car, and after that, any and all of the effects of the wax/sealant/365 were gone. Nothing except water on the surface, and the water is adhering to the surface ‘like glue.’ I saw a message here about the 365, and it appeared to be legitimate. It continues to add the pearl-effect to the water even after four months. So I’m not supposed to use the new soap? Thank you for your guidance
  • I’m a novice in this field: But I really like it
  • The 28th of November, 2016, 01:01 p.m.2

Re: Seems like the NXT Generation Car wash removes Paint protect 365 and Sealant 2.0

  • Hello, Daniel. Greetings and welcome to MOL. During the first detailing of the car, which precise Turtle Wax product did you use to finish it off? Was it a true protectant, or more of a surface preparation product than anything else? Despite the fact that I am not familiar with their products, it is likely that they prevented our Synthetic Sealant 2.0 from adhering well, hence preventing the Paint Protect from adhering effectively
  • The 29th of November, 2016, 8:17 a.m. 3Registered Member
  • Power6 Representative

Re: Seems like the NXT Generation Car wash removes Paint protect 365 and Sealant 2.0

  • Thank you for your response, Nicholas! I used the original turtle wax that I had applied previously. Before I used the new soap, everything appeared to be in order. I, on the other hand, can
  • The 29th of November, 2016, 8:24 a.m. Four-year-old registered member with Rep Power6.

Re: Seems like the NXT Generation Car wash removes Paint protect 365 and Sealant 2.0

  • Thank you for your response, Nicholas! I used the original turtle wax that I had applied previously. Before I used the new soap, everything appeared to be in order. The NXT Generation cleansed the car, but I’m not sure if I washed it with another soap before using it and then applying the 365. So you believe that there was an issue with the sealer and the turtle wax, which caused everything to disintegrate after two washes? Could I apply the sealant after the paintcleanse and then apply the 365 after that? Alternatively, should I apply some ‘hard’ wax first? Alternatively, stick to 365 and nothing else.
  • The 29th of November, 2016, at 1:20 p.m.5

Re: Seems like the NXT Generation Car wash removes Paint protect 365 and Sealant 2.0

  • Daniel Klemetsen originally posted this on his blog. Thank you for your response, Nicholas! I used the original turtle wax that I had applied previously. Before I used the new soap, everything appeared to be in order. The NXT Generation cleansed the car, but I’m not sure if I washed it with another soap before using it and then applying the 365. So you believe that there was an issue with the sealer and the turtle wax, which caused everything to disintegrate after two washes? Could I apply the sealant after the paintcleanse and then apply the 365 after that? Alternatively, should I apply some ‘hard’ wax first? Alternatively, stick to 365 and nothing else. I apologize for the delayed answer! I would recommend starting over with a clay bar or a light paint cleaner/polish to remove any existing protectant, and then applying two coats of the product of your choice, with the second coat being applied a full 12 – 24 hours after the first coat for the best possible results. Our products should also be applied at temperatures over 55 degrees Fahrenheit, according to the manufacturer. If they were previously applied at a temperature lower than this, it is possible that this contributed to your experience. I hope this has been of assistance! Nov. 29th, 2016, 3:05 p.m., by Nick 6Registered Member
  • Power12
  • Rep Power

Re: Seems like the NXT Generation Car wash removes Paint protect 365 and Sealant 2.0

  • PP365 is designed to be applied directly to bare paint and is not intended to be put over another product. The 30th of November, 2016, 8:37 a.m. Seven-year-old registered member
  • Power6

Re: Seems like the NXT Generation Car wash removes Paint protect 365 and Sealant 2.0

  • Thank you, Nick, and I’ll begin again. Does DasBurninator intend to apply wax or sealant on top of 365, or polish or something else to make it look great, or is it only the 365 that will be used, with nothing beneath or above it? What about the sealant 2.0, I was really pleased with it, is it possible to apply it straight on raw paint as well as previously painted surfaces? And nothing happened when the sealant 2.0 was applied? Thanks
  • 9:30 a.m. on November 30th, 2016. 8

Re: Seems like the NXT Generation Car wash removes Paint protect 365 and Sealant 2.0

  • Nick has given me permission to restart. In order to make the 365 appear nicer, DasBurninator, is it proposed that you apply wax or sealant on top of it, or polish or anything similar to make it look nicer, or simply the 365 itself, with nothing under or above it? What about the sealant 2.0, I was quite pleased with it, is it possible to apply it directly on naked paint as well as on painted surfaces in general? Moreover, there was no follow-up to the sealant 2.0 Thanks
  • 9:30 a.m. on November 30, 2016. 8

Re: Seems like the NXT Generation Car wash removes Paint protect 365 and Sealant 2.0

  • Okay, it’s clear that I need to learn more about this. ‘Bare paint’ is what it sounds like to me: simply paint. For example, first use alcohol to remove everything but the pigment, and then apply the product after that. However, you claim that sealant should not be applied straight on the paint, but rather after it has been polished. According to my ‘ears,’ this means that when you polish your car, there will be no leftovers when you remove it with a microfiber cloth after it has dried
  • However, when you do the same procedure with wax, it will look the same, but there will be a superthin layer on the paint that provides you with the desired level of protection, water pearling, and so on. Right? Or? Because I used the M21 after the polish, which is the proper way to go, right? Why? And then, I suppose, I made a mistake by appying for the PP365. Is it possible to use the M21 as a polish, or does it not function that way
  • November 30, 2016, 01:56 PM10

Re: Seems like the NXT Generation Car wash removes Paint protect 365 and Sealant 2.0

  1. IPA prep wipes are available as an option if you choose to use them. This is something I do, but it is absolutely voluntary. An interesting piece to read. M21 does not have the capacity to fix errors. It is used as a final sealant. Those with the designation M205 or ultimate polish are finishing polishes.

How to Remove Water Spots From Your Car

Acne-like patches on the skin are known as water spots. The shame connected with either is obviously powerful, regardless of whether you have a small amount or a large amount. Water spots, like acne, are more than just an annoyance on the surface; they also create scars that last a lifetime. While their visibly unpleasant appearance is the first thing that most people notice, the damage they cause is far more repulsive than their physical presence. As a result of water spots, things such as clear coat etching and ‘spider webbing’ scratches are a continual source of anxiety for automobile owners, who annually spend billions on car care products, many of which are expressly intended to mitigate the hazards connected with water spots.

This has prompted a number of innovative thinkers to develop simple, cost-effective methods of eliminating ugly water marks from surfaces.

Throughout this post, we’ll go over the most frequent types of water spots, as well as the underlying reasons of these spots, as well as a few tried-and-true ways for getting them off a hard surface.

The 3 Stages of Water Spots

Water spots may or may not be visible on the surface of the car’s paintwork depending on the color and condition of the paintwork. The photo is courtesy of the Puget Sound MARS/Facebook page. To the uneducated eye, all water spots appear to be carved from the same piece of muck, yet in reality, they are each as distinct as the individual who is concerned about their existence in the environment. In general, there are three basic types of water spots, each of which is created by a distinct source and manifests itself in a different way.

The fact that water spots fall into one of the three stages described below is one of the key reasons why the automobile detailing community likes to categorize them in this manner.

Stage 1 Water Spots

It’s a good example of Stage I (or Type I) water spots, which are the most frequent and readily remedied types of water stains. Credit for the image goes to Wilson Auto Detailing/YouTube The feared ‘hard water spot’ is almost certainly something you’ve heard about by now. Hard water stains are as prevalent as drinking water, whether they’re lodged in your shower door or dribbling down the side of your car’s paintwork. This car wash contaminant, which is commonly produced by excessive quantities of minerals such as calcium and magnesium, is more of a problem with the water supply than with the car wash itself.

Stage I hard water spots can also be created by rain that has gotten contaminated by impurities such as sand in the air, smog, or pollen.

Stage2 Water Spots

Stage II water spots often start off as Stage I stains, but because they are not removed in a timely way, they are allowed to embed themselves into the clear coat, making removal a little more difficult. Featured image courtesy of Next Generation Detailing, LLC on Facebook A Stage II water spot, also known as a ‘bonded mineral’ water deposit, is the second form of water spot. While this type of water stain can also be created by pollutants or overly hard water, the difference is that a Stage II water stain has been given adequate time to ‘bind’ with the painted surface’s clear coat, resulting in a more permanent ‘bond’ with the painted surface.

The use of an aclay bar, mitt, or towel can also be utilized to remove some Stage II water stains, a topic that will be covered in greater depth later in this article.

Stage3 Water Spots

In most cases, Stage II water spots begin life as Stage I stains, but because they are not removed in a timely way, they are permitted to embed into the clear coat, making removal a little more difficult. Featured image courtesy of Next Generation Detailing, LLC on Facebook. A Stage II water spot, also known as a ‘bonded mineral’ water deposit, is the second form of water spot that can appear. The difference between a Stage II water spot and a Stage I water spot is that a Stage II water spot has been given sufficient time to ‘bind’ with the painted surface’s clear coat, resulting in a more lasting ‘bond’ with the painted surface.

Water stains from Stage II may also be removed with the use of an acacia bar, mitt, or towel; this is a topic that we shall cover a bit more in depth later in the text.

4 Ways to Remove Water Spots From a Car

Following the completion of the clay bar treatment, a thorough wash and dry will aid in the removal of any debris that may have been raised during the detailing process. Credit for the image goes to Wilson Auto Detailing/YouTube Now that we’ve covered the many types of water spots and how to identify them, it’s time to talk about how to remove them. Professional detailers propose four tried-and-true procedures for eliminating hard water stains, with each of the methods described below becoming increasingly time-consuming as they progress through the list of steps.

1.The Two-Buckets-and-a-Beer Approach

Two scrubbing buckets, one for rinsing and the other for sudsing, can assist to prevent impurities from making their way back onto your car’s clear coat once it has been cleaned. The super-chill, two-buckets-and-a-beer strategy is the first step, and it is frequently the most effective means of removing Stage I water sports from the equation. Make sure, however, that you finish by wiping off the area with an incredibly absorbent microfiber drying towel, as this will help prevent those bothersome mineral-rich deposits from reappearing.

Required Two-Bucket Car Wash Supplies

In order to finish a two-bucket wash, you’ll need to gather the goods listed below.

  • (three) Washing buckets (you’ll use one of these buckets to wash the wheels and tires, and the other two will be used to wash the remainder of the car)
  • (2) Microfiber wash mitts (one will be used solely on the wheels and tires, and the other will be used to scrub all other surfaces)
  • (2) Microfiber rags (one will be used exclusively on the wheels and tires, and the other will be used to scrub all other surfaces)
  • (1) Bottle of low pH automotive shampoo
  • (5) Microfiber towels for drying and hand polishing
  • (1) Bottle of low pH automotive shampoo

Rinse the Vehicle

The first step is to use a high-pressure water gun to spray the whole car. While doing so, not only will any surface dirt be dislodged, but it will also give a pre-lubricated surface for your wash mitt to glide over.

Wash Your Wheels

The wheels and tires of your car should be scrubbed and rinsed first, before you begin to wash your vehicle. Brake dust, which is composed of millions of minute metallic and ceramic particles, is frequently found on the rollers of a vehicle’s tires. It is well-known that brake dust may embed itself into painted surfaces and cause scratches, therefore blasting this material away prior to cleaning any surrounding painted surfaces is critical to achieving success.

Wash One Panel at a Time

One piece at a time should be scrubbed and rinsed utilizing the two-bucket approach, in which you soak your filthy mitt in water before reloading it with the sudsy water contained within the second bucket. It is critical to remember to re-spray each piece with water as you proceed, as this will help to keep everything properly lubricated and avoid wet spots from developing prematurely.

Dry as Quickly as Possible

After you have finished washing, properly drying the whole car with a fluffy microfiber towel as fast as possible can dramatically lessen the likelihood of recurrent wet marks. Using a high-quality microfiber towel is especially beneficial since they absorb moisture at a much faster pace than regular cotton cloths, and they are not nearly as prone to drips as traditional cotton towels. Quick Tip: If you want to go further deeper and learn more about the two-buckets-and-a-beer vehicle wash strategy, check out this article.

2. The White Vinegar Wash

Photograph courtesy of Using distilled white vinegar to wash down the whole surface of the vehicle is another easy, yet efficient method of eradicating water spots (Stage I and lighter Stage II stains).

Also known as a “vinegar bath,” this method takes your garden variety white vinegar, and blends it with equal amounts of distilled water. However, we tend to dislike using the word “bath” when referring to this method, as it is more of a vinegar “shower” than a full-blown soak.

  • Spray surfaces with the pungent vinegar solution after finishing a thorough two-bucket wash and toweling off the car
  • Then wipe away the solution with a clean microfiber cloth after a few seconds
  • Then repeat the process with a clean microfiber cloth. In order to remove stubborn water stains, it may be necessary to perform many rounds of vinegar wipe-downs, with 30-45 second periods of soak time in between each spraying and wiping session. It is preferable to spray a small part at a time to avoid oversaturating the area (like 2-foot-by-2-foot sections). Allow the solution to soak for approximately 30 seconds before wiping down with a microfiber cloth or towel. Due to the fact that entrenched wet spots will not be eliminated this method, it is advised to only do this twice.

A word of caution from a nerd: be careful. If vinegar is left to stay on a painted surface for an extended period of time, it will begin to chip away at the clear coat. At all costs, avoid direct sunlight and high-temperature environments.

3. The Clay Decontamination Treatment

You will be shocked at how much dirt and grime can be removed from the external surfaces of your vehicle once you have clayed it. Featured Image courtesy of The next step in the process of eliminating water spots is to use a clay bar to remove the stains. This technique, which is also known as ‘claying,’ involves removing impurities from a vehicle’s outer surfaces using a synthetic, putty-like bar, or a hybridized mitt or cloth. The use of clay should be reserved for situations in which the two-bucket cleaning approach and a wipe-down with white vinegar have proven ineffectual.

Required Car Claying Supplies

  • A) A bottle of claying lubricant (you may purchase it or make your own)
  • B) A clay bar/mitt/towel
  • C) Five microfiber towels for drying and hand polishing
  • D) A clay bar/mitt/towel
  • E) A clay bar/mitt/towel

Lube-up Your Automobile

Spray some lubricant spray solution directly onto the portion of the car that you plan on claying after you have sprayed it down with water across the entire vehicle. Also, coating the clay tool with lubricant before use is always a good idea since it will make the contaminant removal process run more smoothly.

Clay It Like You Mean It

Once you’ve lubricated her up, massage the clay bar back and forth across the surface of the car, constantly following the lines of the vehicle. Regardless of whether you use a bar, mitt, or cloth, all automotive claying products are meant to conform to the surface of the car, so make sure to cover every square centimeter of the vehicle’s surface area with the claying product. It is important to note that you should never clay in a circular motion since this might cause harm to the clear coat.

Rinse That Mess Off

As soon as a body panel or piece of the car has been clayed, and the bar slides smoothly over the surface (it will be a fight at first, as it will accumulate dirt and grime), rinse the area thoroughly and go on to the next section.

Dry and Inspect

Inspect all of the surfaces for stubborn water spots after they have been lubricated, clayed, and washed. Use a new microfiber drying towel or a succession of microfiber polishing cloths to go over the whole car to ensure that no stubborn water stains remain. Quick Tip: At AvalonKing, we like to use clay mitts and towels rather than typical clay bars since they are more comfortable. Despite the fact that they are all designed to perform the same function, clay mitts and towels are reusable, and unlike clay bars, they can be washed off and reused if they come into contact with the ground or get contaminated in any way.

5. Paint Correction

It is true that paint correction is a time-consuming and labor-intensive process, but it is unquestionably the most effective method of eliminating ugly water spots, persistent surface pollutants, and clear coat scratches. In the event that all of the other methods indicated above have failed to eliminate the water stains, this final procedure should be used.

Paint correction, also known as polishing, is normally reserved for the most severe cases of clear coat and paint damage, as it necessitates the use of polishing power equipment and abrasive cutting chemicals to achieve the desired results. Paint Correction Supplies That Are Required

  • One (1) polishing tool or drill with polishing attachments that may be adjusted
  • One (1) paint correction kit
  • One (1) automotive painter’s tape
  • And five (5) microfiber polishing cloths.

Prep Every Panel With Passion

Using painter’s tape, tape off any areas of the car that you don’t want to be polished with the buffing wheel after you’ve tried the three water spot elimination procedures indicated above and found them to be unsuccessful.

Apply Cutting Compound With Conviction

Make tiny applications of the compound to one piece of the car using an applicator pad or a clean microfiber cloth, working your way around the vehicle until the entire panel or area has been coated.

Spread That Shit Thin FTW

You will want to spread the cutting compound thin in order to achieve the best results, as using too much of this abrasive medium will simply result in extra waste and might potentially slow down the finishing process.

Rub It… Rub It Real Good…

Attach a microfiber polishing pad to the business end of the polishing power tool of your choice and begin rubbing the compound into the clear coat using the tool. Move the polishing pad across the surface while applying consistent amounts of pressure, first in an up-and-down pattern and then in a left-to-right pattern, until every section of the panel has been polished.

Towel-Off and Move On

Following complete polishing of the panel or area of the car that you are currently working on, wipe it down with a clean microfiber cloth before going on to the next stage. All of the processes in the preceding section should be repeated until the car has been thoroughly polished and there are no water marks left. a quick tip: Despite the fact that it may seem difficult, basic paint repair is a rather uncomplicated operation. It is clear from our blog article on the subject of paint repair that this is a time-consuming and tiresome operation rather than a technically demanding undertaking.

How to Prevent Water Spots

Wilson Auto Detailing’s Luke Wilson applies Armor Shield IX ceramic coting on the side of a customer’s Tesla Model Y for a YouTube experimental video series in which the car is featured. Credit for the image goes to Wilson Auto Detailing/YouTube Despite the fact that there are a plethora of tactics one may use to keep their car dry, there are four well known procedures that are the most effective in reducing typical hard water spots.

1. Always Use the Two-Bucket Wash Method

Using the two-bucket procedure every two weeks, and NEVER leaving your car to air dry or burn in the sun while it is being washed, will erase the majority of Stage I hard water stains on your vehicle.

2. Microfiber All the Things

It is not only faster to dry car surfaces when using a clean microfiber towel, but the extra plush material will not leave scratches on the clear coat and will lift unseen pollutants as well. If you want to go the additional kilometer, you may always elect to first blast your freshly cleansed car with compressed air or a leaf blower to prevent water mark drips and the chance of surface scratches before continuing on with your journey.

3. Skip the Sprinklers and QuestionableH2O

Plant watering devices such as sprinklers and other types of irrigation devices are infamous for consuming some of the dirtiest water available on the grid, therefore parking your car far away from an area where plants are regularly watered is always a good preventative measure.

If you have cause to believe that you have come into touch with some dubious water, get some fast detailing spray and a microfiber cloth and sanitize the contaminated area as quickly as possible.

4. Apply a Protective Paint Coating

Although applying a 9H-rated nano ceramic coating to a car will not prevent water spots from appearing, it will provide some considerable water-repelling capabilities, which will prevent the crud contained within the H2O from drying on the surface of the vehicle. Nano ceramic coatings have moisture wicking’hydrophobic’ qualities, which when properly cured make it impossible for impurities to cling to them. However, even if you have a ceramic coating added on your car, you will still need to wash and dry it on a regular basis.

Parting Shots

In this video, I demonstrate how to apply AvalonKing Armor Shield IX on a ceramic surface. While seeing water spots on your recently cleaned clear coat is a bummer, knowing how to remove them and minimize their damage can provide some consolation in the long run. The most important steps in protecting a painted surface from water stains are to follow the necessary processes, obtain the suitable cleaning equipment, and act swiftly. Water stains will become significantly less of a problem if you take the initiative and use a high-quality DIY nano ceramic coating solution like Armor Shield IX.

It is likely that you will appreciate AvalonKing’s automobile maintenance products for do-it-yourselfers if you have enjoyed this article.

items’ at a reasonable cost for our customers.

Visit our homepage by clicking here.

Meguiar’s NXT Generation Tech Wax 2.0 Review

Because it is a synthetic sealer and does not include real Carnauba wax, Meguiar’s NXT Tech Wax 2.0 depends heavily on polymer technology to provide both shine and protection to the paint surface. Many customers, even expert detailers, were impressed with how effortlessly this product applied and removed with minimum streaking, and how it left a flawless surface thereafter. Still, there have been conflicting reports on the quality of the shine and how well it conceals swirls; however, the vast majority of reviewers agree that this is not the most lasting wax available on the market.

In order to purchase a Tech Wax, there are a few things you need know about the product.

Important Note: Before applying wax or sealant, make sure the paint has been properly primed.

We encourage you to study our guidelines on how to wash, clay, and polish your furniture. It will take a little more time, but it will be well worth your time in the end. Table of Contents (just click on the title to get to the next section!)

Features of Meguiar’s NXT Generation Tech Wax 2.0

  • Although of a synthetic nature, all of the constituents and the final combination have been properly examined in the laboratory. The powdery residues that were characteristic of previous liquid waxes have been eliminated. UV rays are effectively blocked by this effective shielding agent. Light scratches and swirl marks can be concealed with this product.


The longevity of this product will be determined by a number of factors, including humidity, ambient temperature, how frequently it rains, and whether or not you allowed it to cure correctly. It is possible that this wax will last many months if you reside in a city with low humidity levels, such as Los Angeles. However, in high-humidity places, it may only last a few weeks and may need to be reapplied on a regular basis in order to preserve the protective layer of skin. If you wash your car more regularly, the durability of your vehicle may suffer as well.

Ease of Application

Depending on your preference, you may apply this product by hand or using a machine such as the porter cable. With hand application, use a foam applicator and distribute the product in very tiny circular motions on a straight line, as seen in the video below. Avoid applying with a large circular motion, as this can produce noticeable swirl marks on the surface of the skin. It is not necessary to use a large amount of this product in order for it to be effective; nonetheless, thin coats should be applied in order to save money on the product in the long term and to make it simpler to remove afterwards.

In the event that you detect pollutants on the surface, you will need to clay it; in the event that you notice obvious swirl marks, you will need to polish it.

Any location with less sunshine and colder temperatures will suffice in terms of creating the ideal condition for applying the wax coating to the surface.

Ease of Removal

Remove the NXT 2.0 after 20 minutes has passed in order for it to dry to a haze and dry up completely; if you fail to do so, you may have a difficult time buffing this stuff off and you may end up with streaks. Product removal should be done using a microfiber towel or any other non-lint towel. (Optional) Use extremely thin coats, as I said in the last part, and resist the temptation of placing too much on the applicator in the mistaken belief that you’ll gain greater protection by adding more; this will just waste the product and be very difficult to remove later.


The degree of the gloss will be entirely dependent on the preparation work done on the paint; thus, be certain that you clay and polish the paint before applying it to the surface. This is required in order for the polymers to form a strong connection with the clear coat, resulting in the finest possible shine. Light swirl marks are easily filled in with this solution; however, don’t anticipate miracles when it comes to large swirls because it does not include any cleansers or polish at all. All of the images were taken by customers.

Just remember to apply very thin layers of paint.

Because this is a synthetic substance, don’t expect to receive a ‘wet look’; instead, you’ll get a sharper and more reflecting appearance. If you want that carnauba shine to go along with the mirror shine, apply another coat of carnauba wax on top of the first one to get it.


ProsThere were a large number of reviews for this product because it is a mainstream product that is usually on display at auto shows and events. The overwhelming majority of them were favorable. Consumers like how simple it is to use and rub off this product, which leaves a nice if not excellent shine on their automobiles. As an extra plus, it does not attract dust, which reduces the amount of time spent dusting. Furthermore, because you only need thin coats, you will be able to get more mileage out of each bottle.

That is most likely the key explanation for the efficiency of its shielding as well as the need to use fewer amounts of liquid wax to get excellent effects when using liquid wax.

When there are people who genuinely adore a thing and others who genuinely despise it, it can be difficult to assess its overall quality.

If you have a black, red, blue, or silver automobile and enjoy the reflected sheen that a synthetic sealer provides, and you don’t mind spending a little extra money on a wax, then the NXT Tech Wax is worth considering.

Customer Reviews

Despite a large number of good reviews, there were a few negative ones that dragged the total rating down a little. This can be complicated, but we’ve broken it down for you in the pros and drawbacks section to make things easier to understand.


Some people may find this product to be a little too pricey for their tastes, but if you compare it to comparable brands such as zaino or klasse, it is far less expensive. The most recent pricing on Amazon, where it is available for FREE SHIPPING if you subscribe in their Amazon Prime program, may be found by visiting this link: Amazon Prime.


Those who want a sharp mirror finish on their automobiles will find the NXT 2.0 to be a wonderful choice. Whether you drive a red or blue vehicle, silver or even a black vehicle, this will be a fantastic choice for you. Although the cost may be a deterrent, the fact that it requires just a small amount to be effective means that a single container will last you for quite some time.

Today’s Top 4 Best Car Waxes

Great car wax can keep your vehicle looking like new for a long time, but if you can locate the finest car wax on the market, you can make an older vehicle appear like new even if you have owned it for a long time. However, with so many options available, it may be difficult to identify the finest auto wax manufacturers, each of which makes the claim to be the best.

As a result, Protect My Car wants to give some insight into which car wax is good, and which car wax may be called the finest car wax available on the market today. See which car waxes are the most effective for your vehicle by reading our evaluations.

1. Best Car Wax, is it Mothers Car Care?

Mothers Automobile Care products have long been standard fare in the world of car cleaning, and the company’s reputation among customers may be attributed to its consistent dependability combined with competitive price. The brand’s Reflections Car Wax, for example, deserves to be included on our list because it provides your favorite set of wheels with a much-desired silky-smooth sheen that may even outperform that of showroom equivalents. Mothers Reflections Car Wax not only gives your car an immediate sheen with a simple single-layer application, but it also eliminates older wax residues from the surface of your car thanks to the presence of excellent cleaning ingredients in its recipe.

2. Mothers California Gold Pure Brazilian Carnauba Wax

Of addition to being the third and final phase in Mothers Car Care’s three-step polishing technique, the California Gold Pure Brazilian Carnauba Wax – Step 3 claims to give your vehicle that ‘fresh-out-of-the-factory brilliance.’ The California Gold Pure Brazilian Carnauba Wax – Step 3 is used after the Pure Polish – Step 1 and Micro-Polishing Glaze – Step 2, and it acts as the finishing touch to the whole manicure and pedicure.

We recommend that you apply more than one layer of California Gold Pure Brazilian Carnauba Wax – Step 3 whenever you deem it necessary due to its non-abrasive texture that allows for multiple applications and its smooth 100 percent composition of Brazilian carnauba wax, as recommended by Mothers Car Care.

3. Is Meguiar’s NXT Generation Tech Wax the Best Car Wax

As another well-known brand in the automobile polishing industry, it should come as no surprise that Meguiar’s NXT Generation Tech Wax has been featured on this list. One of the reasons why the NXT Generation Tech Wax is so popular is that it is simple to apply and can be done at home. It is also a popular component in many detailing businesses because of the pure sheen it imparts to surfaces. However, despite the fact that Meguiar’s NXT Generation Tech Wax has a very limited shelf life on your car’s surface, it is still simple to apply with any appropriate application equipment.

4. Meguiar’s G18216 Ultimate Liquid Wax

Meguiar’s G18216 Ultimate Liquid Wax isn’t labeled as ‘ultimate’ only for the purpose of being descriptive. It is a worthy investment since theG18216 Ultimate Liquid Wax may last up to eight months on your car’s surface sheen after application. It is a beneficial investment because it protects your car’s surface sheen from the afflictions of various weather conditions. In addition to the G18216 Ultimate Liquid Wax’s long-lasting impact on your favorite car, Meguiar’s includes an applicator pad and a microfiber towel with the product as part of the package when you purchase it.

If you are one of those individuals who appreciates devoting a few hours a week to cleaning your vehicle yourself because you know that no one will wash it as good as you do, this list of car waxes should assist you in finding a solution that works for your particular situation.

Maintaining your car is one of the most crucial aspects of keeping it working as well as it appears.

In order to have all of your vehicle’s maintenance and Extended Car Warranty Protection paid for by Protect My Car, you must call Protect My Car right away to find out more information and to set up an appointment.

Ceramic Coatings

Ceramic Coatingsstraightlinede2021-12-17T Ceramic Coatingsstraightline 08:19:17-08:00

The Highest Level of Protection

Ceramic coatings are the next generation of surface and paint protection for automobiles and other vehicles. They not only extend the life of your vehicle’s paint, but they are also hydrophobic, which makes your vehicle easier to clean because it sheds water more easily and has self-cleaning properties that repel dirt along with water, resulting in a vehicle that requires less maintenance and has radiant levels of gloss and shine.

Choose Your Level of Protection

Surface and paint protection using ceramic coatings is the next step in the evolution of vehicle protection technology. They not only extend the life of your vehicle’s paint, but they are also hydrophobic, which makes your vehicle easier to clean because it sheds water more easily and has self-cleaning properties that repel dirt along with water, resulting in a vehicle that is less maintenance-intensive while maintaining radiant levels of gloss and shine.

  • Jade A-70 is a ceramic coating that is applied with a spray gun. 7H on the hardness scale
  • Lasts one year
  • Includes full exterior detail+ disinfection
  • Includes 2-stage paint correction
  • 7H on the hardness scale

Sedans and coupes are available. Small trucks are available for $399. Wagons and minivans are popular choices. SUVs start at $475X-Large SUVs start at $575 Trucks with a ton of cargo: $550

  • Coating made of Jade Grapheneceramic
  • 9H on the hardness scale
  • Lasts for 5 years
  • Includes full exterior detailing as well as decontamination. Includes many stages of paint repair, depending on the extent of correction required

Benefits of Ceramic Coating

Because of its self-cleaning characteristics, it sheds water and grime easily. For the whole 5-year lifespan of the product, Jade Quartz Pro delivers superior paint protection. Ceramic coatings are inert, which means that they are not reactive to chemicals, and this property helps to guard against paint etching as well as contamination. This ultra-hard coating has a hardness value of 9H on the hardness scale, which is the maximum attainable level. You may use it as a sacrificial layer on your vehicle since it binds with the paint and is more difficult to scratch or harm.

Eliminates fading over time by creating a protective barrier between your car’s paint and the sun’s harmful UV radiation.

Nano crystalline ceramic coatings are exceedingly durable and resistant to scratch or scuff, making them ideal for use in high-traffic areas.

Jade Ceramic provides the most up-to-date ceramic coating technology available.

The Straight Line Difference

The first step in getting the mirror sheen that comes with ceramic coating is to buff and polish the paint of your car’s bodywork. When a ceramic coating is placed to your car, any defects in the paint will be magnified, regardless of whether it is brand new or several years old. As a result, it is vital to repair the quality of your car’s paint as the first stage in the installation of any ceramic coating system. Our paint repair method might include mild sanding, but it always includes decontamination, buffing, and polishing to remove swirls, light surface scratches, water spots, and other flaws from your vehicle’s paint.

We will first assess the state of your vehicle’s paint in order to provide you with an exact pricing estimate. The end effect will be a mirror finish shine on your automobile, which will give the utmost in paint protection at an affordable price.

Benefits of Ceramic Coating

First and foremost, buffing and polishing your car’s paint will help you get that mirror sheen that you’ve been dreaming of. Regardless of whether your car is brand new or several years old, any defects in the paint will be magnified once a ceramic coating has been placed to the surface. As a result, it is vital to fix the surface of your car’s paint as the first stage in the application of any ceramic coating. We can use mild sanding to eliminate swirls and minor surface scratches, as well as water spots and other flaws, but we always use decontamination, buffing, and polishing to remove them.

We will assess the state of your vehicle’s paint first in order to provide you with an accurate pricing estimate.

Meguiars NXT Generation Tech Wax is unlike any other car wax! Tech Wax, a synthetic, scientifically engineered paint sealant, is an alternative to

A completely new kind of protection! With the introduction of Meguiars NXT Generation Tech Wax 2.0, a new degree of shine and protection is introduced! Nothing even comes close to the quality of this incredible product. NXT Generation Tech Wax 2.0 on and removes with ease, leaving a glittering trail of evidence of the protection it provides! Look down through the crystal-clear shell to the depth and richness of the color-drenched depths beneath you. Discover how simple it is to unveil a beautiful new finish with this technique!

As an alternative to traditional wax, Tech Wax 2.0 is a synthetic, scientifically developed paint sealer.

A wax can be used to achieve the look of a sealant (which is stated to be glossier, wetter, and richer in appearance) while still maintaining the durability of the sealer.

Meguiar’s does not advocate using Tech Wax 2.0 on top of another sealer or wax, according to the company.

If you’re planning on attending a vehicle show or cruise, or simply want to show off your ride, you won’t want to be caught without Tech Wax 2.0 on hand.

With the help of new ESP (Engineered Synthetic Polymers) technology, a durable polymer connection is formed between your paint and your vehicle, providing extraordinary protection.

There is no other sealant that can accomplish this!

Reflections that are sharp and crisp, as well as bold profiling.


A detailing clay will assist you in achieving this goal.

Hand applications should be done using a foam pad, and machine applications should be done with a fine, foam pad on a dual action buffer. An 18-ounce foam applicator is supplied.

Leave a Comment

Your email address will not be published. Required fields are marked *