Oil drain plug size for Buick? (Best solution)

Dorman – Autograde – Oil Drain Plug Magnetic M12-1.75, Head Size 15mm (Part No.

  • Oil Pan Drain Plug, 1/2-20 in. Thread Size, Seal, Buick, Cadillac, Chevy, GMC, Chrysler, Dodge, Plymouth, Jeep, Each Part Number: RNB-65147 (2)

What size socket fits oil drain plug?

Place a 3/8-inch (0.9 centimeters) socket in the socket wrench, fit it over the drain plug’s nut and turn it counterclockwise. The oil drain plug should open easily, draining the used oil from the engine.

What size is the oil drain plug on a 2003 Buick Lesabre?

Dorman – Help – Oil Drain Plug Pilot Point M12-1.75, Head Size 15mm (Part No. 69011)

What size is the oil drain plug on a 2013 Buick Enclave?

All plugs have 14mm hex – just one wrench works for all.

Are all oil drain plugs the same size?

There is no universal drain plug size, but there are only a couple different sizes in common use. Auto shops do not need to replace the plug, it is almost always reuseable. The disposable part is just a sealing washer or gasket. Most shops probably reuse that instead of replace it.

How do I know what size socket I need?

How to Determine the Right Size Socket for a Nut

  • Turn on the digital caliper and set it to read in inches, not millimeters.
  • Close the caliper jaws until each jaw rests on one flat side of the nut on opposite sides.
  • Check the caliper display.
  • Turn on the digital caliper and set it to read in millimeters, not inches.

What size is my oil drain plug?

You can also find the exact size by measuring the thread size of the manufacturers plug that is initially installed on the oil pan. Then you should measure the thread pitch: The “thread pitch” is the distance between threads, this is measured in millimetres (measured along the length of the oil drain plug).

What size is the oil drain plug for a 2005 Buick Lesabre?

All plugs have 14mm hex – just one wrench works for all.

Where is the oil pan on a 2009 Buick Enclave?

The engine oil pan is located on the bottom of the engine and is large enough to hold all the oil in the engine. It is bolted to the engine block, and to prevent oil leaks there’s an oil pan gasket in between the block and pan.

What size is the oil drain bolt size?

Dorman 090-033CD Oil Drain Plug Standard M14-1.50, Head Size 17mm Compatible with Select Models.

What size bolt is on the oil pan?

Oil Pan Bolts, 5/16-18, Head Size 3/8 In.

Are oil drain plug gaskets universal?

There are different quantities of the engine oil drain plug gasket. At every oil change, replacement is recommended. Some universal and direct replacement gaskets are available.

Buick LeSabre Oil Pan Drain Plug

That your hunt for the correct Oil Pan Drain Plug goods for your Buick LeSabre has come to an end will make your vehicle very pleased! With 15 different Oil Pan Drain Plug options for your car, Advance Auto Parts has what you’re looking for. Order online or visit us in-store today. The greatest news is that our Buick LeSabre Oil Pan Drain Plug products are reasonably priced, starting at just $1.67. When it comes to your Buick LeSabre, you want parts and supplies from only the most reputable companies available.

Accufit and Dorman are two of our most popular Oil Pan Drain Plug product brands.

We also offer reviews of our OEM and aftermarket Oil Pan Drain Plug goods to assist you make an informed decision when shopping online with us.

You may shop online and have your purchases delivered to your doorstep at the greatest possible price and quality.

You’ll be back on the road in no time if you stop by one of our local Advance Auto Parts locations.

FAQs forBuick LeSabre Oil Pan Drain Plug Products

2012-011 The 2.0L TV flex engine with a m12x1.751989-87 was introduced. M12x1.75 1988-87 2.0L VIN 1 m12x1.75 2.0L VIN K,M m14x1.51986-83 m14x1.51986-83 2.0L 1/2x 201996-93 (2.0L 1/2x 201996-93 Magnesium magnetic m12x1.751996-93 2.2L 2.2L m12x1.751995-92 2.2L m12x1.75 2.3L m12x1.751991-88 m12x1.75 2.3L m12x1.751999-96 2.3L m12x1.751999-96 2012-10 2.4L m12x1.75 2012-10 the year 1987-1980, the size 2.4L m12x1.75 2.5L m12x1.75 m12x1.75 m12x1.75 m12x1.75 m12x1.75 m12x1.75 m12x1.75 m12x1.75 m12x1.75 m12x1.75 m12x1.75 m12x1.75 m12x1.75 m12x1.75

Buick 6 Cylinder Engine oil drain plugs

1989-87 2.8L plus 82 Century m12x1.751986-80 2.8L plus 82 Century m12x1.75 1/2202010 2.8L 1/2202010 m12x1.751988-83 3.0L natural gas engine 3.0L 1/2-201982 3.0L 1/2-201982 M12x1.75 3.0L 2005-04 3.0L 3.1L m12x1.752003-97 3.1L m12x1.75 Magneto-magnetism m12x1.751996-941 3.1L m12x1.751993-89 3.1L m12x1.75 3.1L ml2x1.751979-78 x 1.751979-78 3.2L 1/2 201993-89 (201993-89) 1/2202005-04 3.3L 1/2202005-04 2003-02 3.4L m12x1.75 2003-02 Magnetic 3.4L m12x1.75 2007-05 2012-08-08 3.5L m12x1.75 M12x1.75 engines for 3.6L N7, ND, N3, and N3 engines from 2007 to 2015.

See also:  Troubleshoot HID headlights? (TOP 5 Tips)

2009-08-03 3.6L m12x1.75 M12x1.75×3.8L N2 engine, manufactured in 2007.

Buick 8 Cylinder Engine oil drain plugs

1976-75 4.3L 201981-80 1/2L 201981-80 4.3L m12x1.751982 m12x1.751982 1/2202011-08 4.4L 1/2202011-08 2007 M12x1.75×1.65×4.6L NY, N9, NS engine M12x1.751980-79 4.6L m12x1.751980-79 4.9L m12x1.751978-77 m12x1.751978-77 4.9L 201991-77 1/2L 201991-77 1/202009-08 5.0L 1/202009-08 2007-04-03 5.3L m12x1.75 1756-77 5.3L m12x1.75196-77 201996 5.7L / 1/2 201996 5.7L m12x1.751979-77 m12x1.75 6.6L 201976-59 1/2L 201976-59 All of February 20th, 2019 Rick Muscoplat is a professional musician.

Rick Muscoplat posted a blog entry on

BUICK 5.7L/350 Oil Pan Drain Plugs Parts & Accessories

The following are the results 1 – 23 of 2325 records per page. Sorting by Default Stainless Steel Magnetic Oil Pan Drain Plug, 1/2-20 RH in. MRG-15 is the part number for the threads and seals (18) Estimated for the United States Shipment date: January 17, 2022 International shipment is expected to arrive on Friday, January 7, 2022. The estimated ship date for the United States is January 17, 2022. International shipment is expected to arrive on Friday, January 7, 2022. The AER-FBM3117 is a coupling with a quick-drain oil pan and gasket that fits all thread sizes.

  1. Estimated delivery date in the United States: 5/11/2022 International shipment is expected to arrive on Friday, January 7, 2022.
  2. Threads and a seal (each), part number:SUM-G15 (38) The estimated ship date for the United States is January 31, 2022.
  3. The estimated ship date for the United States is January 31, 2022.
  4. Set of 5 Oil Pan Drain Plugs with 1/2-20 in.
  5. RNB-090-052 is the part number for this item (1) The estimated ship date for the United States is January 31, 2022.
  6. The estimated ship date for the United States is January 31, 2022.
  7. The RNB-65147 is an oil pan drain plug with a 1/2-20 in.
  8. The part number is RNB-65147 (2) Estimated for the United States Shipment date: February 14, 2022 International shipment is expected to arrive on Friday, January 7, 2022.
  9. The part number for Oil Drain Pan Plugs is RNB-69012; each plug has a thread size of 1/2-20 in.
  10. The estimated ship date for the United States is March 4, 2022.
  11. The estimated ship date for the United States is March 4, 2022.

International shipment is expected to arrive on March 7, 2022.

Plug for draining oil pans made of chrome and magnets with 1/2-20 RH in. threads and a seal, sold in pairs.Part Number:SUM-G1382 (2) Estimated for the United States Shipment date: 4th of February, 2022 International shipment is expected to arrive on Friday, January 7, 2022. The estimated ship date for the United States is February 4, 2022. International shipment is expected to arrive on Friday, January 7, 2022. Magetic Drain Plug for Oil Pans with 1/2 in.-20 threads and a rubber seal (each)Part Number:TRD-9062 (1) Estimated for the United States Shipment date: March 14, 2022 International shipment is expected to arrive on Friday, January 7, 2022.

AER-FBM3137AER-FBM3137AER-FBM3137AER-FBM3137AER-FBM3137AER-FBM3137AER-FBM3137AER-FBM3137AER-FBM3137AER-FBM3137AER-FBM3137AER-FBM3137AER-FBM3137AER-FBM3137AER-FBM3137AER-FBM3137A (2) Estimated delivery date in the United States: February 21, 2022 International shipment is expected to arrive on February 22, 2022.

  1. Part Number: RNB-090-052-1 Oil Pan Drain Plug with 1/2-20 in.
  2. It has not yet been reviewed.
  3. International shipment is expected to arrive on February 8, 2022.
  4. International shipment is expected to arrive on February 8, 2022.
  5. It has not yet been reviewed.
  6. International shipment is expected to arrive on Friday, January 7, 2022.
  7. International shipment is expected to arrive on Friday, January 7, 2022.
  8. International shipment is expected to arrive on March 22, 2022.
  9. International shipment is expected to arrive on March 22, 2022.

thread size and is designed to fit the following vehicles: Buick, Cadillac, Chevrolet; Chrysler; Dodge; Eagle; GMC; Jeep; Oldsmobile; Plymouth; Pontiac; each vehicle has the following part number:RNB-65202 (2) Estimated for the United States Shipment date: February 14, 2022 International shipment is expected to arrive on Friday, January 7, 2022.

  1. Part Number:LNG-33300 Oil Pan Drain Plugs, 1/2-20 in., Magnetic, Each (1) Estimated for the United States Shipment date: March 9, 2022 International shipment is expected to arrive on Friday, January 7, 2022.
  2. International shipment is expected to arrive on Friday, January 7, 2022.
  3. Estimated delivery date in the United States: February 14, 2022 International shipment is expected to arrive on February 15, 2022.
  4. Oil Drain Pan Plugs, Plug, Thread Size 1/2-20 in.
  5. UNC, Each It has not yet been reviewed.
  6. International shipment is expected to arrive on Friday, January 7, 2022.
  7. International shipment is expected to arrive on Friday, January 7, 2022.
See also:  Polish headlights — step by step? (Suits you)

It has not yet been reviewed.

International shipment is expected to arrive on February 14, 2022.

If you buy today, you will receive an estimated international shipping date of February 14, 2022.

The estimated ship date for the United States is November 11, 2022.

if the order is placed today The estimated ship date for the United States is November 11, 2022.

Running Breaker Oil Drain Pan Plugs, Plug with Thread Size 12mm x 1.75, EachPart Number:RNB-65211 It has not yet been reviewed.

if the order is placed today Estimated delivery date in the United States: February 14, 2022 If you buy now, you will receive an estimated international shipping date of 2/15/2022.

It has not yet been reviewed.

if the order is placed today Estimated delivery date in the United States: February 14, 2022 If you buy now, you will receive an estimated international shipping date of 2/15/2022.

Estimated delivery date in the United States: February 14, 2022 International shipment is expected to arrive on February 15, 2022.

Drain Pan Plugs, Plug with a Thread Size of 12mm x 1.75, Set of 5, Oil Drain Pan Plugs RNB-090-079 is the part number for this item.

Estimated delivery date in the United States: February 14, 2022 International shipment is expected to arrive on February 15, 2022.

RNB-090-079CD Oil Drain Pan Plugs, Plug, Thread Size 12mm x 1.75, EachPart Number:RNB-090-079CD Oil Drain Pan Plugs It has not yet been reviewed.

if the order is placed today Estimated delivery date in the United States: February 14, 2022 If you buy now, you will receive an estimated international shipping date of 2/15/2022.

What size is my oil drain plug?

QuestionsAnsweredViewed4k times2002 Buick Century The last time I had my oil changed was in a shop with other people (Sears). That plug is firmly secured in place. The strangest thing is that I can’t seem to get a decent grip on it with a wrench. Because 5/8″ is too large, a 5/8″ open end wrench can rotate approximately 40 degrees before it latches onto the hex nut end of the plug hex nut. When using a 12-pt box end wrench or a 12-pt socket, there is also enough movement that I’m reluctant to crank on it too hard for fear of rounding the end of the wrench.

  1. 15mm appeared to be too large, while 14mm appeared to be too little to get on.
  2. In the end, I used an adjustable wrench and tightened the jaws down to a comfortable fit.
  3. In fact, I did not use any sort of extension on the wrench at all.
  4. So, what do you recommend I do?
  5. If I can find a 6-pt 5/8 socket, would it be the way that is least likely to result in rounding the corners?
  6. (The size information on Advance Auto’s website is insufficient.) I’m assuming it’s a 5/8″ wrench, but why would an open end wrench be free before I’ve even applied any force on it?
  7. asked At 21:20 on November 1, 2018, Bob3411Bob3411951 silver badge4 bronze badges3 Bob3411Bob3411951 bronze badges A 15mm head drain plug with an M12x1.75 thread, according to rockauto.com, should be used for your drain plug installation.
  8. The use of a pair of highly tuned Vise-Grips should most likely be sufficient to complete the task.

Please keep in mind that I have no association with RockAuto.com. It’s merely a quick way to find out about different components. answered At 23:28 on November 1, 2018, Pᴀᴜʟsᴛᴇʀ2♦ There are 2 gold badges, 228 silver badges, 449 bronze badges, and 27 gold badges in all.

Not the answer you’re looking for? Browse other questions taggedoilbuickcenturyorask your own question.

You are currently using an out-of-date web browser. It is possible that this or other websites will not show correctly. You need either upgrade your browser or switch to another one. 1713Buick OwnershipEnding Remarks Is it just me, or does anybody else have trouble rounding the 10mm oil drain plug bolt when it’s tightened? Thanks. 8,1761,494113 Ownership of a Buick Regal GS 2017 is a high-performance vehicle. Is it a six-point socket or a box-end wrench that you’re using? 1713Buick OwnershipEnding Remarks Is it a six-point socket or a box-end wrench that you’re using?

Because I purchased the vehicle secondhand, I am unsure of its history.

When it comes to lug nuts and brake hardware that has greater torque specifications, I always use a 6 point wrench.

See also:  VW Golf ABS Light On? (Question)

The drain plug bolt on the most of the cars I’ve owed has a heavier 13mm or 15mm in diameter.

The purpose for using a 10mm head is to avoid overtightening the bolt in the aluminium oil pan threads, which might cause damage.

This bolt is frequently installed with an impact by enthusiastic garage monkeys, which is most likely what happened to yours.

The torque specifications for this bolt are extremely low, and they are provided in pounds per square inch rather than pounds per foot of torque.

My oil is always changed on my own, and nothing has been removed.

He was entitled to three free oil changes, but he was unable to take advantage of the third since the dealer was fully booked for the next two weeks.

I worked on extracting the plug for almost 4 hours, employing every instrument I had at my disposal, including a 6-pointer socket, vice grips of various sizes, a bolt extractor, and others.

With adequate flesh on the sealing flange, the plug may be firmly grasped in place.

I took the faulty plug to the dealer, and because they were the last ones to change the oil, they offered me a new one at no charge as a thank you for my business.

The plug’s head is far too little, and it’s far too simple to round the corners when using it.

If at all possible, always utilize a 6-pointer socket.

PS: Before going to the dealer, I went to all of the usual auto parts retailers, but none of them had what I was looking for.

The delaer is the only site I could find, and it was roughly $22 per person.

He was entitled to three free oil changes, but he was unable to take advantage of the third since the dealer was fully booked for the next two weeks.

I worked on extracting the plug for almost 4 hours, employing every instrument I had at my disposal, including a 6-pointer socket, vice grips of various sizes, a bolt extractor, and others.

With adequate flesh on the sealing flange, the plug may be firmly grasped in place.

I took the faulty plug to the dealer, and because they were the last ones to change the oil, they offered me a new one at no charge as a thank you for my business.

The plug’s head is far too little, and it’s far too simple to round the corners when using it.

If at all possible, always utilize a 6-pointer socket.

PS: Before going to the dealer, I went to all of the usual auto parts retailers, but none of them had what I was looking for.

The delaer is the only site I could find, and it was roughly $22 per person.

I just left it in the hands of the dealership and went to get an oil change.

At the dealership, I believe I paid the same price.

When I get my next oil change, I’m planning to order one of these.

Look no farther than right here at our very own forum store – where orders are mailed out the same day they are placed!

He was entitled to three free oil changes, but he was unable to take advantage of the third since the dealer was fully booked for the next two weeks.

I worked on extracting the plug for almost 4 hours, employing every instrument I had at my disposal, including a 6-pointer socket, vice grips of various sizes, a bolt extractor, and others.

With adequate flesh on the sealing flange, the plug may be firmly grasped in place.

I took the faulty plug to the dealer, and because they were the last ones to change the oil, they offered me a new one at no charge as a thank you for my business.

The plug’s head is far too little, and it’s far too simple to round the corners when using it.

If at all possible, always utilize a 6-pointer socket.

PS: Before going to the dealer, I went to all of the usual auto parts retailers, but none of them had what I was looking for.

The delaer is the only site I could find, and it was roughly $22 per person.

With a cheater bar at the end of the pipe wrench, it worked perfectly!

Grease monkeys, on the other hand, do.

Torque of 10 ft-lb is really little.

_1563Buick OwnershipEnding Sequence THANK YOU SO MUCH for the pipe wrench suggestion! With a cheater bar at the end of the pipe wrench, it worked perfectly! Great! I’m delighted you were able to make use of that small technique.

Leave a Comment

Your email address will not be published. Required fields are marked *